• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.27-36
• /
• 1998

The surface of wiper blade(W/B) rubber was chlorinated by chemical treatment method using the hydrochloric acid(HCI) and sodium hypochlorite(NaOCl). From the results of contact angle measurement, friction coefficient measurement, and ATR-IR spectra, the surface characteristics of chlorinated W/B rubber with time of chlorination were studied. Contact angles for W/B rubber with increasing time of chlorination and chlorine concentration were measured for the water and ethylene glycol. From the results, contact angle fell rapidly with increasing time of chlorination and chlorine concentration, reaching a constant value after about 10min. And the wettability of W/B rubber surface by means of chlorination has been improved. For an unchlorinated W/B rubber, the friction coefficient with time of chlorination decreased from 1.27 to 0.20~0.23 on full chlorination. As the results it was considered that abrasion resistance of W/B rubber surface has been also improved. The values of pH and $Cl^-$ ion concentration in a chlorine treatment solution decreased as the extent of chlorination of W/B rubber surface increased. From the results of ATR-IR spectra, it was observed that C=C double band of W/B rubber surface transformed into C-Cl band, but quantitative determination of the extent of chlorination was not feasible because of the complexity of chlorination reactions.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.81-87
• /
• 2003

Latex polymers are widely used for adhesive, binder, paint etc. Especially the PVAc(Polyvinyl acetate) latex which manufactured by vinyl acetate and vinyl alcohol as protective colloid is a useful environmentally friendly adhesive. To increase useful property of PVAc latex, this study was carried out for checking thermal characteristics and physical condition of PVAc latex by DSC, FT-IR, Pyrolyzer GC-MS. The activation energies of thermal decomposition for 40, 48, 56, 64% solid content of PVAc latex were found as 28.1-36.0kcal/mol by Kissinger's method and 17.2-22.0kcal/mol by DSC method. Actually, reasonable solid content could be consiered as 56% because of activation energy and adhesive characteristics. According to the effect of protective colloid for 4, 10, 15, 20wt%, the activation energy shows same tendency to both method and in case of l5wt% has been found as the highest activation energy. The mechanism of thermal decomposition was mainly estimated by main chain scission, not by side group on FT-IR analysis. Main component of Pyrolzer GC-MS result were consisted of $CH_3COOH$, $CH_3$, $H_2O$ and light gases(CO, $CO_2$, $CH_4$ etc).

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.49-58
• /
• 2008

This research was carried out to use green tea leaves powder for scavenging effects of volatile organic compounds on the UV varnishes and adhesives of fancy cherry veneer overlaid on the PF resin bonded Meranti plywood. The results are as follows: 1) Green tea leaves contained 9.85% of polyphenol compounds. 2) FT-IR results showed green tea leaves had effects to react with benzaldehyde and ethyl hexyl alcohol to form a chemical bond. 3) 2.5% of green tea leaves powder content was proper for scavenging effect on the UV varnishes and adhesives of fancy veneer overlaid on the PF resin bonded plywood 4) 20 liters small chamber test indicated excellent emission speed results such as $0.089mg/m^2hr$ of TVOC and $0.001mg/m^2hr$ of HCHO (on 7th day), as compared with standard (less than $0.1mg/m^2hr$ of TVOC and $0.015mg/m^2hr$ of HCHO emission are the excellent grade).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.330-338
• /
• 1999

Extensive research has been conducted on effects of drought stress on growth and development of soybean but information is rather restricted on the limited-irrigation system by way of precaution against a long-term drought condition in the future. The experiment for limited-irrigation was conducted in transparent vinyl shelter at Asian Vegetable Research and Development Center (AVRDC), Taiwan in 1997. Two soybean varieties, Hwangkeum and AGS292, improved in Korea and AVRDC, respectively were used for this experiment. The relationships between normalized transpiration rate (NTR) and fraction of transpirable soil water (FTSW) in both varieties were similar that the NTR was unchanged until FTSW dropped to about 0.5 or 0.6. At FTSW less than those values, NTR declined rapidly. Days required to harvest in both varieties were significantly prolonged at IR6 treatment compared to any other treatments. Daily mean transpiration rate was significantly higher at IR5 treatment, as averaged over varieties. Similarly, water use efficiency was also high at 1R5 treatment. In both varieties, seed yield was the greatest at the IR5 treatment, as compared to any other limited-irrigation treatments, due to the increased seed number and high transpirational water use efficiency. The indices of input water and seed yield for the different limited-irrigation treatments against control indicated that Hwangkeum produced 59.6% or 60.7% of seed yield using 36.1% or 44.9% of input water, as compared to control, by irrigation at only R5 or R6 stages, respectively. The AGS292 produced 56.1% of seed yield with 35.4% of input water of control, when irrigated at R5 stage. The results of this study have elucidated that the limited irrigation at R5 stage in soybean can be minimized yield loss with such small quantity of water under the environment of long-term drought stress and the expected shortage of agricultural water in the future.

• The Korean Journal of Ceramics
• /
• v.7 no.1
• /
• pp.36-40
• /
• 2001

In order to fabricate uncooled IR sensors for pyroelectric applications, multilayered thin films of Pt/PbTiO$_3$/Pt/Ti/Si$_3$N$_4$/SiO$_2$/Si and thermally isolating membrane structures of square-shaped/cantilevers-shaped microstructures were prepared. Cavity was also fabricated via direct silicon wafer bonding and etching technique. Metallic Pt layer was deposited by ion beam sputtering while PbTiO$_3$ thin films were prepared by sol-gel technique. Micromachining technology was used to fabricate microstructured-membrane detectors. In order to avoid a difficulty of etching active layers, silicon-nitride membrane structure was fabricated through the direct bonding and etching of the silicon wafer. Although multilayered thin film deposition and device fabrications were processed independently, these could b integrated to make IR micro-sensor devices.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.36-41
• /
• 2000

This study was carried out to introduce functional groups onto wood by reacting with 2-methacryloyloxyethyl isocyanate(MOI). The effects of the catalyst and the reaction conditions(temperature and time) on the treatment were investigated. The evidence of bonding between wood and MOI were examined by infrared(IR) spectroscopy. The change in surface characteristics of MOI treated wood was examined by water contact angle measurement and X-ray photoelectron spectroscopy(XPS). Wood reacted quickly with MOI in the presence of di-n-butiltin dilaurate catalyst. Especially, the increase in weight percent gain(WPG) with increasing in reaction time was remarkable at the reaction temperature of over $50^{\circ}C$. The IR spectrum of wood reacted with MOI showed a strong urethane absorption(1715 $cm^{-1}$) but no isocyanate(2235 $cm^{-1}$) absorption. It also showed a sharp olefinic C=C double bond absorption at 1635 $cm^{-1}$. This means that an introduced methacrylate group becomes the starting point of further graft copolymerization with another vinyl monomers. The wood modified with MOI showed a gradual increase in contact angle with increasing in WPG, which means that the hydrophilic wood surface become quite hydrophobic. Also, it was cleared that most parts of the wood surface were modified with MOI by XPS analysis.

• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.30-36
• /
• 1989

Some chelating agents are evaluated as an antioxidant for the autoxidation of soybean oil. Soybean oil is autoxidized under a mild condition (the flow rate of 67ml $O_{2}/min$ and $50^{\circ}C$). The antioxidant effect is measured by active oxygen method, and the spectral change of autoxidized soybean oil examined. The antioxidant effect of chelating agents is increased in order of diphenic acid, naphthoquinone, pyromellitic acid, quinolinic acid and naphthalic acid, and particularly the effect is low in diphenic acid and naphthoquinone. It is found that the effect is more clearly demonstrated by NMR rather than IR and UV and that the effect is dependent on the functional group and geometric molecular structure of chelating agents.

• The Journal of Korean Medicine
• /
• v.36 no.1
• /
• pp.75-85
• /
• 2015

Objectives: Type 2 diabetes mellitus is a metabolic disease characterized by insulin resistance and high blood glucose level from progressive insulin secretory defect. The rhizome of Atractylodes japonica Koidz. (AJ) has been used for treatment of retention of water in oriental medicine. The aim of this study is to examine the effects of AJ on type 2 diabetes rats. Methods: Type 2 diabetes was induced by 60% high fat diet and low dose streptozotocin. Rats were divided into 4 groups (n = 6); Nor (normal control group), Con (diabetic group treated with vehicle), Met (diabetic group treated with 200 mg/kg metformin) and AJ (diabetic group treated with 100 mg/kg AJ). The body weights and food intakes were measured during the treatment period. After 4 weeks treatment, blood glucose level, HOMA-IR, and protein expressions of IRS-1, p-IRS-1, PPAR-${\gamma}$, and GLUT4 were measured, and histopathological examination of beta cell was performed. Results: Compared with the control group, blood glucose level and HOMA-IR were reduced in rats treated with AJ. Impaired beta cells in pancreas of rats were recovered and phosphorylation of IRS-1 was increased in rats treated with AJ. And also, protein expressions of PPAR-${\gamma}$ and GLUT4 were increased by treatment of AJ. Conclusions: The results suggest that Atractylodes japonica Koidz. may have anti-diabetic effect on type 2 diabetic rats through regulation of blood glucose level and insulin resistance. Therefore Atractylodes japonica Koidz. may have positive effects on patients with type 2 diabetes.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.37-43
• /
• 2008

The research attempted to develop an eco-friendly wood adhesive based on vegetable oil (soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The soybean oils (SBO) were reacted with $O_3$ at the rate of 7.13 g/h for different times, 15 minutes, 30 minutes, 60 minutes, and 120 minutes. Modified chemical structure of the ozonized SBOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of SBO had an absorbance peak at $3010cm^{-1}$ that is the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and aldehyde or carboxyl peak appeared at $1700cm^{-1}$. The dry, wet, and cyclic boiling bond strengths of the ozonized SBO mixed with polymeric diphenylmethane-4, 4-diisocyanate (pMDI) were also investigated. In the dry shear test, all strengths met constantly the standard requirement of $7.0kgf/cm^2$ (KS F3101 2006). The bond strengths gradually increased with increasing ozone treatment time. The highest strength showed at 60 minutes ozone treatment and decreased values at 120 minutes. In the cyclic boiling shear test, 30, 60 and 120 minutes exceeded the standard requirement.

• Korean Journal of Weed Science
• /
• v.11 no.2
• /
• pp.87-99
• /
• 1991

The experimental growth regulators Hoe78784 and PP-333 significantly reduced lodging in all rices. However, they did not significantly affect the crop vegetative characteristics and yield components, except by decreasing plant height when both growth regulators were applied at booting stage. Grain yield of IR21820-154-3-2-2-3 increased due to reduced lodging when Hoe78784 and PP-333 were applied at booting. These growth regulators increased the thickness and diameter of the culm. Applying CCC did not affect lodging in all test varieties. CCC-treated varieties and the control showed lower number of vascular bundles and culm thickness and diameter of the third and fourth internodes. Hoe78784 and PP-333 significantly reduced internode length from the second to the third internode in short-statured varieties. In tall varieties. reduction extended up to the fourth internode. Culm N content of the varieties did not significantly differ among treatments, except in IR8. Culm P content also did not differ significantly among treatments. although K and Si content was the highest than control when Hoe78784 was applied.