• 제목/요약/키워드: IR signal

검색결과 237건 처리시간 0.028초

IR-UWB 시스템에서 다중경로 지연시간 분석을 통한 고 정밀 거리추정 (High-Precision Ranging Scheme based on Multipath Delay Analysis in IR-UWB systems)

  • 전인호;김영억
    • 한국통신학회논문지
    • /
    • 제35권9C호
    • /
    • pp.778-785
    • /
    • 2010
  • 본 논문에서는 IR-UWB 시스템에서의 채널추정 및 다중경로 지연시간 분석을 통한 고 정밀 거리추정 기법을 제안하고자 한다. IR-UWB 무선 신호를 송수신 할 때 정밀한 거리 추정을 위하여 무선채널을 경유한 신호의 전파 도달 시간을 측정하는 Time of Arrival 추정 기법에 의한 고 정밀 거리추정 방식을 수행 하였다. 제안된 기법에서는 Minimum Mean Square Error 또는 Zero Forcing 등의 채널추정 기법과 지연시간 추정 기법인 Matrix Pencil (MP) 기법을 합하여 송수신기 간의 존재하는 다중경로 중에 IR-UWB 펄스보다 더 좁은 간격으로 중첩 수신된 다중경로를 분석하여 수 cm이내의 정밀한 거리를 추정할 수 있음을 보였다. 또한, 제안된 기법을 적용한 시스템의 거리 추정 성능을 IEEE 802.15.4a 채널 모델 별로 비교 분석하였으며, MP parameter 값의 변화에 따른 거리 추정 성능과 연산량 변화를 컴퓨터 시뮬레이션을 통해 분석 하였다.

가전제품 통합 제어를 위한 Wi-Fi/IR 게이트웨이 및 스마트폰 애플리케이션 구현 (Implementation on Wi-Fi/IR Gateway and Smartphone Application for Integration and Control of Consumer Appliances)

  • 류원재;채석;신수용;김영형;정동수
    • 한국통신학회논문지
    • /
    • 제42권4호
    • /
    • pp.879-888
    • /
    • 2017
  • 사물 인터넷의 보급으로 인해 스마트홈 서비스 기능을 제공하는 스마트 가전의 보급이 활발하게 이루어지고 있다. 이에 따라 스마트기기로 직접 제어할 수 있는 Wi-Fi 및 Bluetooth가 접목된 제품들이 선호되고 있다. 하지만 현재까지 개발된 가전제품은 IR(InfraRed) 기반의 제품이 많으며, 제품마다 호환되는 프로토콜이 다르다는 문제가 있다. 본 논문에서는 이러한 문제를 해결하기 위하여 스마트폰을 이용하여 스마트 가전 및 기존 가전제품을 제어하기 위한 시스템을 제안하고자 한다. 제안하는 시스템은 Wi-Fi 및 IR 게이트웨이로 스마트폰의 제어명령을 Wi-Fi를 통해 수신하고 이를 IR로 변환하여 기존 가전제품들을 제어하는 역할을 수행하도록 한다. 또한 특정 브랜드의 가전제품이나 특정 스마트폰에서만 지원 가능했던 리모컨기능을 제약 없이 사용가능 하도록 하고, 하나의 가전기기에 하나의 리모컨이 사용되는 한계점을 벗어나 모든 스마트폰을 이용하여 다양한 가전제품을 제어할 수 있도록 하고자 한다.

다중 경로 환경에 적합한 저전력 저복잡도의 IR-UWB 수신기 설계 및 구현 (A low power, low complexity IR-UWB receiver in multipath environments and its implementation)

  • 이순우;박영진;김관호
    • 대한전자공학회논문지TC
    • /
    • 제44권6호
    • /
    • pp.24-30
    • /
    • 2007
  • 본 논문에서는 다중경로 임펄스 전파 채널 환경에서 중 저속통신에 적합한 저전력, 저복잡도의 IR-UWB 수신기를 제안하였다. 제안된 수신기는 자승기 및 적분기를 사용하여 복잡한 Rake 구조를 사용하지 않고서도 다중경로 환경 하에서 분산된 임펄스 신호의 에너지를 효과적으로 합산하였다. 또한 임펄스 신호의 검출을 위하여 1-bit Sampler를 사용하여 기존의 고속 병렬 ADC를 대체하였으며 이 과정에서 Sample Rate을 낮추고 BER 손실을 줄이기 위하여 Sampler의 입력으로 수신 신호의 저주파 성분인 포락선을 사용하였고, 샘플 획득 후 디지털 상관기 회로를 추가하였다. 그리고 수신되는 임펄스 마다 심벌 결정구간을 설정하여 이 구간 내에서 임펄스 심벌을 판단하는 구간동기 개념을 사용하였으며, 이로써 임펄스 신호의 동기 조건을 완화시키어 간단한 디지털 동기회로 만으로 정밀한 PLL을 대체할 뿐 아니라 다중 경로 및 timing error 등의 내 외부 환경의 변화에 효과적으로 대응하였다. 제안된 수신기는 IEEE 802.15.4a에서 제안된 채널 모델을 활용하여 그 성능을 모의 검증하였고 FPGA로 구현하여 실제 환경에서 그 성능을 입증하였다.

IoT기반 원격환자모니터링을 위한 생체신호 측정 알고리즘 설계 및 구현 (Design and Implementation of Biological Signal Measurement Algorithm for Remote Patient Monitoring based on IoT)

  • 정애란;유용민;이상준
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제8권6호
    • /
    • pp.957-966
    • /
    • 2018
  • 최근 들어 고령화 및 1인 가구 증가로 인해 IoT기반 원격환자모니터링에 대한 요구가 증대되고 있다. 본 논문에서는 원격환자모니터링을 위한 다중의 IR-UWB레이더를 이용한 비접촉식 생체신호측정시스템을 제안하였다. 기존에는 생체신호처리를 위해 배경차분알고리즘을 적용하였으나, 전압노이즈, 계단현상 등의 에러 발생을 없애고자 다중 배경차분 알고리즘을 적용하였다. 다중배경차분알고리즘은 이전 클러터와 현재 클러터의 변화량을 계산하여 신호를 추출하며, 본 연구에서는 SVD알고리즘을 이용하였다. 개선된 다중배경차분알고리즘을 생체신호측정에 응용하여 고속 푸리에 변환을 통해 호흡수를 계산하였다. 제안한 IR-UWB레이더를 이용한 시스템 및 다중배경차분알고리즘의 검증을 위해 호흡수 측정을 진행하였다. Neulog사의 부착형 공기압착식 호흡측정기를 대조군으로 실험한 결과 97.36%의 정밀도를 확보함으로서 본 연구의 타당성을 검증하였다. 구현된 알고리즘은 기존의 접촉식 웨어러블 방식의 불편함을 개선하였다.

실내 다중경로 무선채널의 IR-UWB 시스템에서 레이크 수신기의 성능 분석 (Performance Analysis of RAKE Receivers for IR-UWB Systems in Indoor Multipath Radio Channel)

  • 김은철;윤병완;양재수;김진영
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.253-256
    • /
    • 2008
  • In this paper, we analyze the performance of RAKE receiver for impulse radio-ultra wide band (IR-UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

  • PDF

능동 광메타 디바이스 기술 동향 (Active Photonic Metadevice Technology)

  • 황치선;홍성훈;황치영;조성목;김용해;서동우;심재식;이정익;이진호
    • 전자통신동향분석
    • /
    • 제33권6호
    • /
    • pp.81-93
    • /
    • 2018
  • Metamaterials are artificial media that can control the properties of waves at will. Active photonic metadevice technologies cover the device and material technologies that control the visible and IR light through an external signal (mainly an electrical signal). The application areas of active photonic metadevices are tremendous for example holography, active HOE, bio imaging, IR imaging, telecommunication, and optoelectronic devices. In this paper, the technical trends and prospects of active metamaterials, active meta holography, active meta devices, nano-optical telecommunication devices, and IR imaging meta devices are reviewed.

전자 나침반과 적외선 광원 추적을 이용한 이동로봇용 위치 인식 시스템 (Localization System for Mobile Robot Using Electric Compass and Tracking IR Light Source)

  • 손창우;이승희;이민철
    • 제어로봇시스템학회논문지
    • /
    • 제14권8호
    • /
    • pp.767-773
    • /
    • 2008
  • This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

실내 무선측위/통신을 위한 IEEE 802.15.4a IR-UWB 시스템 설계 (IEEE 802.15.4a IR-UWB System Design for Indoor Ranging and Communications)

  • 오미경;박주호;오정열;길민수;김재영
    • 대한임베디드공학회논문지
    • /
    • 제4권1호
    • /
    • pp.16-22
    • /
    • 2009
  • This paper aims at designing an impulse-radio ultra-wideband (IR-UWB) transceiver, especially targeting the IEEE 802.15.4a indoor ranging and communication systems. We first investigate the IEEE 802.15.4a IR-UWB signals and suggest the full-digital transceiver architecture accordingly. Since the wireless systems equipped with the impulse signal have the property of low-duty cycle, i.e., discontinuity in time, while the conventional systems takes the continuous signals, it is required to reconfigure the system design, including link budget. Following brief introduction to our IEEE 802.15.4a IR-UWB system hardware, we finally examine the ranging performance in indoor environments to verify our system design.

  • PDF

중.원 적외선 동시 검출기를 위한 readout 회로 설계 (Readout Circuit Design for Dual Band IR Detector)

  • 강상구;김병혁;이희철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.57-60
    • /
    • 2001
  • A readout circuit for Dual band IR detector was proposed and designed. Designed circuit provide to detector a stable diode bias and high injection efficiency using Buffered Direct Injection (BDI) input circuit. Then, amplifier in the unit cell is operated when cell is selected in order to minimize the power consumption. We could confirm through the simulation that designed circuit integrate and output simultaneously the signal generating from the dual band IR detector.

  • PDF

근접영역에서의 IR 탐색기 정보를 이용한 표적적응유도 (Target Adaptive Guidance Using Near-Zone Information from IR Seeker)

  • 엄태윤;김필성
    • 한국군사과학기술학회지
    • /
    • 제5권3호
    • /
    • pp.113-119
    • /
    • 2002
  • A target adaptive guidance(TAG) algorithm is proposed employing the near-zone signal that can be measured from an infrared seeker. The guidance order is composed of a conventional PNG command and an additional command to be calculable from an additional LOS rate between a hot point of target and a required intercept point. The characteristic of the near-zone signal is similar to that of LOS rate that is inversely proportional to the square of time-to-go. Hence the proposed scheme can be applied to real systems with no estimator for time-to-go. From analysis results on the miss distance with perfect missile and perfect seeker, it follows that the proposed TAG algorithm guarantees missile to be ideally guided to the required intercept point. And it is less affected by the TAG start time and a proportional navigation ratio than other TAG schemes using a LOS rate such as a step bias or a ramp bias.