• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.91-101
• /
• 2020

The purpose of this study was to investigate the influence of obesity on the expression of autophagy-related proteins in cardiac muscle. To this end, obesity was induced in rats through 20 weeks of high-fat diet, and the animals were then subjected to 8 weeks of treadmill exercise. Subsequently, the expression of proteins that regulate the induction of autophagy, formation of autophagosome, and fusion of autophagosome and lysosome was confirmed. Obesity was induced in the experimental animals (SD rats) through 20 weeks of high-fat diet (carbohydrate: 20%, fat: 60%, and protein: 20%), and they were subsequently subjected to 8 weeks of treadmill exercise (5 days/week, 30 min/day, 5 minutes; 8m/min, 5 minutes; 11m/min, 20 minutes; 14m/min). The experimental groups comprised the normal diet control group (ND-CON, n=10), high-fat diet comparison group (HFD-CON, n=10), and high-fat exercise group (HFD-TE, n=10). Oral glucose tolerance test was conducted before and after 8 weeks of treadmill exercise, and the area under the curve (AUC) was calculated. Through fasting insulin and fasting glucose levels, HOMA-IR, which is an index of insulin resistance, and abdominal visceral fat/body weight (AVF/BW) were calculated for comparison. Moreover, autophagy-related proteins were analyzed from cardiac tissue to investigate the effects of exercise training. Obesity was successfully induced in the HFD-CON group through long-term high-fat diet, and the HFD-CON group had higher body weight, AUC, HOMA-IR, and AVF/BW compared to the ND-CON group. The HFD-TE group, which underwent 8 weeks of treadmill exercise, showed improvements in AUC, HOMA-IR, and AVF/BW. Although the body weight tended to decrease as well, there was no statistically significant difference. mTOR and AMPK, which are involved in the induction of autophagy, both decreased in obesity but increased upon exercise. Beclin-1, BNIP3, ATG-7, p62, and LC3, which are related to the formation of autophagosomes, all increased in obesity and decreased after exercise. Cathepsin L and LAMP2, which regulate the fusion of autophagosome and lysosome, both decreased in obesity and increased upon exercise. Physical activity, including treadmill exercise, was found to induce normal autophagy and improve pathological phenomena observed in metabolic diseases. Therefore, the findings suggest the need to consider treadmill exercise as a primary means to achieve effective prevention and treatment of cardiac diseases.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.215-218
• /
• 2001

본 연구는 가시광선영역에서 각각의 색을 구현하여 색채치료에 이용하기 위한 시스템을 개발하는데 있다. 사용된 광원은 에너지 밀도가 전파장에 걸쳐서 일정한 Dichroic reflector hallogen lamp를 사용하였고, 광원에서 발생하는 적외선을 차단하기 위하여 IR filter를 사용하였다. 색채치료에 사용 가능한 순수한 파장의 색을 분리하기 위하여 long pass filter와 short pass filter로 구성되는 color filter set를 사용하여 구성하였다. 개발된 가시광선 제시 시스템은 빨강, 파랑, 노란 광을 낼 수 있도록 되어 있으며 각각의 광도는 2390 lx, 1020 lx, 17400 lx이다. 개발된 시스템의 객관적 효과를 검증하기 위하여 피부 서식균으로 항균 실험을 하나 결과 노란 광이 빨강이나 파란 광에 비해 세포성장 억제가 컸다. 대식세포와 피부암세포로 실시한 항염 실험은 각각의 색광에 대한 영향이 크지 않았다.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.93-96
• /
• 2007

In this paper, the testing equipment for evaluating aging characteristics of outdoor silicone rubber insulator resulting from the environmental aging effect with regards to sunlight(UV) was developed. Influence of sunlight effect aging is seriously increase due to destruction of ozone layer which is occurred by consumption of fossil fuel. For this purpose, silicone rubber was aged under the artificial sunlight by exposure of xenon lamp radiation in the accelerating aging chamber and various test and analysis were performed such as breakdown strength, contact angle. And FT-IR analysis has been followed.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1276-1278
• /
• 1998

In this paper, aging characteristics of silicone rubber used for outdoor insulation have been investigated with regards to sunlight effect. For this purpose, silicone rubbers were aged under the artificial sunlight by use of xenon arc lamp(1500W) and various tests were performed such as tracking, breakdown, contact angle, stress, strain. And then, in order to elucidate the changes of material, analysis have been followed as follows; FT-IR, SEM and EDS. Regarding the effect of the sunlight, it was obs that the surface of test samples are severely da with decreased hydrophobicity, tracking resistan breakdown strength.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.77-77
• /
• 2002

Cotton fabrics dipped in cationic agent(3-chloro-2-hydroxypropyl trimethyl ammonium chloride) were irradiated with deep Ultra Violet Rays(UV), in the region of UV-C using the low pressure mercury lamp. The chemical changes of cationized cotton fabric surfaces were investigated by FT-IR analysis. The dyeabilities of the irradiated portions were investigated by dyeing with acid dyes. Deep UV(UV-C) irradiation broke O-H bonds in cotton fiber and oxidized the fibers. The dyeability of the UV irradiated portion were different from that of the portion not irradiated. Various pattern were gained from one bath dig dyeing by pattern mask. The tensile strengths of cotton fabrics were decreased in the UV irradiated portion. Washing fastness of cotton dyeings were good about 3∼4 grade and light fastness were fair about 2∼3 grade.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2002

Cotton fabrics dipped in cationic agent(3-chloro-2-hydroxypropyl trimethyl ammonium chloride) were irradiated with deep Ultra Violet Rays(UV), in the region of UV-C using the low pressure mercury lamp. The chemical changes of cationized cotton fabric surfaces were investigated by FT-IR analysis. The dyeabilities of the irradiated portions were investigated by dyeing with acid dyes. Deep UV(UV-C) irradiation broke O-H bonds in cotton fiber and oxidized the fibers. The dyeability of the UV irradiated portion were different from that of the portion not irradiated. Various pattern were gained from one bath dig dyeing by pattern mask. The tensile strengths of cotton fabrics were decreased in the UV irradiated portion. Washing fastness of cotton dyeings were good about 3∼4 grade and light fastness were fair about 2∼3 grade.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.973-976
• /
• 2011

The addition of organic ligand (${\beta}$-diketone or heterocyclic compound) to the europium (III)-containing ionic liquid resulted in bright luminescent soft materials with the molar ratio of europium/ionic liquid (IL)/ligand being 1:3:1 that exhibit bright red light under UV lamp. The luminescent properties such as emission features and lifetime of $^5D_0$ $Eu^{3+}$ excited level are dependent on the organic ligands. The materials were characterized by FT-IR and luminescence spectroscopy. The data shows that at least parts of the ILs (carboxylic acid) are replaced with ${\beta}$-diketone ligand rather than the formation of europium complex with the molar ratio of $Eu^{3+}$:IL: ligand being 1:3:1, while no ILs could be replaced by the heterocyclic ligand such as Bpy and Phen.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.88-95
• /
• 2020

Currently, Fiber-Reinforced Plastic (FRP) composite materials are used in many industrial fields, owing to their superior stiffness and specific strength compared to metals. However, there are issues with FRP inefficiency, due to low productivity of such materials, environmental problems they pose and long curing times needed. Trying to address these issues, research was conducted towards the development of a FRP composite material with excellent properties and short production time, introducing a curing method using a UV lamp. Four types of composite materials were prepared, cured with catalyst or UV (CZ: Catalyst + ZNT 6345, CR: Catalyst + RF 1001 MV, UVZ: Photoinitiator + ZNT 6345, and UVR: Photoinitiator + RF 1001 MV). Examination of the chemical and mechanical properties of these composites showed that UV-cured materials performed better than the catalyst-cured ones. These results indicate that the production process of FRP composite materials can be simplified by using a UV lamp for curing, resulting in composite materials with the same quality, but reduced production time by about 70% compared to currently used practices. This advancement will contribute greatly to the composite material industry.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.323-329
• /
• 2013

This perform research of angle rated defect detection conditions and nuclear power plant piping defect detection by lock-In infrared thermography technique. Defects were processed according to change for wall-thinning length, Circumference orientation angle and wall-thinning depth. In the used equipment IR camera and two halogen lamps, whose full power capacitany is 1 kW, halogen lamps and target pipe's distance fixed 2 m. To analysis of the experimental results ensure for the temperature distribution data, by this data measure for defect length. Reliability of lock-In infrared thermography data is higher than Infrared thermography data. This through research, Shape of angle rated defect is identified industry place. It help various angles defect detection in the nuclear power plant in operation.