• Carbon letters
• /
• 제21권
• /
• pp.74-80
• /
• 2017

A highly facile and eco-friendly green synthesis of Annona squamosa (custard apple) leaf extract reduced graphene oxide (CRG) nanosheets was achieved by the reduction of graphene oxide (GO). The as-prepared CRG was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible (UV-Vis), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopic techniques. Removal of oxygen containing moieties from the GO was confirmed by UV-Vis, FT-IR and XPS spectroscopic data. The XRD and Raman data further confirmed the formation of the CRG. TEM images showed the sheet structure of the synthesized CRG. These results show that the phytochemicals present in custard apple leaf extract act as excellent reducing agents. The CRG showed good dispersion in water.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.16-22
• /
• 1999

The quantitative analysis of SB latex contents in coating color and coated paper was investigated with FT/Raman spectroscopy. From the measured FT/IR and FT/Ramon spectra, the peaks of coating color were compared with those of each compoents . Calibration curves were obtained by the area of latex peaks and PLS method of QuantIR program. The relation of predicted values in PLS method and actual values in coating mixtures and coating layer was examined. The components of coating layer in coated paper were investigated by EDS , X-mapping and SEM, The contents of latex in z-direction were calculated in the coating layer of unknown coated paper. The latex concentration measurements of Top layer and Pre layer in double coated paper show that each layer has different value. In single coated paper, it is clear that the latex concentration is highest at the surface and decreases with an increase of depth. From those results it is indicated that the latex migrates to the coated surface. The result of this study may be applied to the binder migration study and the quality control in paper mill.

• 복식
• /
• 제58권5호
• /
• pp.211-231
• /
• 2008

To conserve historic textiles, analyses of textile materials, pollutants and deterioration are prerequisite steps. Based upon analytical results, guides for conservation of historic textiles are established. In analyses of textile materials, pollutants and deterioration, there are chemical methods(burning, solubility and staining), physical methods(microscopy and density) and instrumental analysis(Fourier Transform Infrared Spectroscopy (FT-IR), Fourier Transform Raman Spectroscopy(FT-Raman), Gas Chromatography(GC), Mass Spectroscopy(MS), X-Ray Fluorescence (EDXRF, WDXRF), Energy Dispersive Spectroscopy(EDS), and X-Ray Diffraction(XRD), Tensile Testing Machine etc.). Combination of qualitative and quantitative analyses makes accurate diagnosis of textile condition possible. As examples of analyses and conservation of historic textiles, Chuninsan(19 century) similar to sunshade with handing down historic textile and golden decorative skirt(17 century) with excavated costume are taken.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.77-83
• /
• 2021

In this study, we investigated various coating methods of graphene oxide on the surface of a petri dish made of polystyrene and analyzed the physical and chemical properties of the coated surface. For coating, spinning, spraying and pressing methods were attempted. The coated surface was characterized by SEM, Raman Spectroscopy, AFM, FT-IR, UV-Vis Spectroscopy and Contact Angle measurement. By spin coating and spray coating, well distributed graphene oxide in the form of multiple islands on the plastic surface with an average size of 5 to 20㎛ are observed by SEM, and high binding energy between graphene oxide and plastic surface is measured by AFM. In case of hand press coating, graphene oxide of 10㎛ or more was observed, and low surface energy was measured. By FT-IR and Raman Spectroscopy analysis, surface coating of graphene oxide was confirmed.

• 보존과학회지
• /
• 제37권6호
• /
• pp.648-658
• /
• 2021

본 연구에서는 증해제 종류(천연 잿물, Na₂CO₃)와 초지 시기(겨울, 여름)가 다른 한지를 선정하여 105℃의 가속열화 환경에서 나타나는 한지의 화학적 변화를 분석하고자 하였다. 백색도(brightness) 및 황색도(yellowness), pH를 측정하여 한지의 열화 정도를 확인하였으며, 적외선 분광분석(FT-IR)을 통해 열화가 진행됨에 따른 셀룰로오스 내 작용기의 변화 정도를 나타내었다. 이를 바탕으로 X선 회절분석(XRD)과 라만 분광분석을 실시하여 FT-IR에서 나타난 셀룰로오스 내 결정 및 비결정영역의 변화를 검증하였다. FT-IR 분석결과, 열화가 진행됨에 따라 셀룰로오스 내 비결정영역의 흡광도는 감소하는 반면 결정영역의 흡광도는 미미하게 증가하는 양상을 보였다. 결정영역의 증가는 XRD 분석 후 결정화도(Crystallinity Index, CI) 산출을 통해 열화 후 다소 증가함을 보여 같은 경향을 띠는 것을 확인할 수 있었다. 또한 라만 분광분석 결과, 열화 후 측정된 형광을 통해 초지 조건에 따른 셀룰로오스 내 비결정영역의 분해 정도를 확인하였다.

• 대한화학회지
• /
• 제47권5호
• /
• pp.447-459
• /
• 2003

일반화된 이차원 상관 분광학은 모든 분자 분광학 즉, 적외선 (infrared, IR), 근적외선 (near-infrared, NIR), 라만 (Raman) 및 형광 (fluorescence) 분광학뿐만 아니라 X-ray 회절, X-ray 흡수 분광학 (XAS), 크로마토그래피 (chromatography) 등에 적용되어 시간뿐만 아니라 온도, 압력, 농도, 조성과 같은 다른 물리적 변화인 외부 섭동 (perturbation) 아래에서 얻은 스펙트럼 분석의 새로운 분광학으로 다양한 분야의 연구가 활발히 진행 중이다. 또한 같은 외부 섭동 아래에서 얻은 완전히 다른 두 스펙트럼의 2D hetero-spectral correlation analysis가 가능하므로 다양한 분야 즉, 생체 물질, 고분자, 나노입자 등의 연구가 활발히 진행 중이다. 이런 다양한 분야의 응용성 때문에 ？일반？?이차원 상관 분광학？？물리, 분석, 고분자, 나노물질 및 생화학 연구에 새로운 방향을 제시할 수 있을 뿐만 아니라 바이오 나노기술 연구에 상승 효과를 제공할 수 있다. 본 논문은 "일반화된 이차원 상관 분광학"의 원리와 그 다양한 응용성을 본 저자들의 연구를 중심으로 소개하고자 한다.

• 폴리머
• /
• 제34권2호
• /
• pp.108-115
• /
• 2010

본 연구는 MWCNT로 보강된 SBR 나노복합재료를 컴파운딩법(compounding)으로 제조하여 산 처리된 MWCNT와 커플링제 상호간의 물리적 화학적 특성을 조사하였다. 황산과 질산으로 산화된 MWCNT는 FT-IR 분석 결과 -COOH로 기능화됨을 확인하였고, Raman 분석 결과 표면의 defect 존재와 disorder됨을 확인하였다. 또한, 제조된 SBR 복합재료의 가황 특성, 전기적 열적 특성 및 기계적 특성을 비교 평가하였다. 그 결과 산 처리된 MWCNT와 커플링제와의 상호 결합력으로 인해 기계적 물성은 상대적으로 증가하였으나, 전기적 열적 특성은 MWCNT의 defects나 disorder의 형성과 chopping으로 인해 감소됨을 확인할 수 있었다.

• 한국진공학회지
• /
• 제10권3호
• /
• pp.356-360
• /
• 2001

다음극 DC PACVD법에서 합성된 직경 80 mm, 두께 900 $\mu\textrm{m}$ ~ 950 $\mu\textrm{m}$의 자유막 다이아몬드웨이퍼의 특성을 분석하였다. 광투과현미경으로 결함의 분포를 관찰하고, Raman 및 IR 장치로 결정성을 분석하였다. 결함은 결정입계 부위에서 많이 관찰되었다. 또한 하나의 결정립에서 (111)면이 (100)면에 비해 상대적으로 많은 결함을 함유하였다. Raman 다이아몬드 peak의 FWHM 및 10.6 $\mu\textrm{m}$ 파장에서의 IR 투과도는 각각 4.6 $\textrm{cm}^{-1}$ /~5.3 $\textrm{cm}^{-1}$및 51.7% ~ 61.9%로, 두 값의 웨이퍼 내에서 균일성은 $\pm$7% 및 $\pm$9%이었다. 다이아몬드 웨이퍼의 결정성은 가운데에서 가장자리로 갈수록 저하되었다.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.23-27
• /
• 2012

The color of a natural diamond that contains nitrogen impurities can be enhanced by a high pressure high temperature (HPHT) treatment. Type IaAB diamond samples containing nitrogen impurities were executed by HPHT process of 5.6 Gpa, 10 min by varying the annealing temperature at 1600, 1650, and $1700^{\circ}C$. Property characterization was carried out using an optical microscope, FT-IR spectrometer, low-temperature PL spectrometer, and micro Raman spectrometer. By observing optical micrographs, it can be seen that diamond sample began to alter its color to vivid yellow at $1700^{\circ}C$. In the FT-IR spectrum, there were no Type changes of the diamond samples. However, amber centers leading to brown colors lessened after $1700^{\circ}C$ annealing. In the PL spectrum, all the H4 centers became extinct, while there were no changes of yellow color center H3 before or after treatment. In the Raman spectrum, no graphite spots were detected. Consequently, diamond color enhancement can be done by higher than $1700^{\circ}C$ HPHT annealing at 5.6 GPa-10 min.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.540-540
• /
• 2013

In this studying, we investigated the basic properties of N-doped plasma polymer. The N-doped ethylcyclohexane plasma polymer thin films were deposited by radio frequency (13.56 MHz) plasma-enhanced chemical vapor deposition method. Ethylcyclohexenewas used as organic precursor (carbon source) with hydrogen gas as the precursor bubbler gas. Additionally, ammonia gas [NH3] was used as nitrogen dopant. The as-grown polymerized thin films were analyzed using ellipsometry, Fourier-transform infrared [FT-IR] spectroscopy, Raman spectroscopy, FE-SEM, and water contact angle measurement. The ellipsometry results showed the refractive index change of the N-doped ethylcyclohexene plasma polymer film. The FT-IR spectrashowed that the N-doped ethylcyclohexene plasma polymer films were completely fragmented and polymerized from ethylcyclohexane.