• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.232-237
• /
• 2014

We have fabricated white organic light-emitting diodes (OLEDs) by co-doping of red and blue phosphorescent guest emitters into the single host layer. Tris(2-phenyl-1-quinoline) iridium(III) [$Ir(phq)_3$] and iridium(III)bis[(4,6-di-fluorophenyl)-pyridinato-$N,C^{2^{\prime}}$]picolinate (FIrpic) were used as red and blue dopants, respectively. The effects of dopant concentration on the emission, carrier conduction and external quantum efficiency characteristics of the devices were investigated. The emissions on the guest emitters were attributed to the energy transfer to the guest emitters and direct excitation by trapping of the carriers on the guest molecules. The white OLED with 5% FIrpic and 2% $Ir(phq)_3$ exhibited a maximum external quantum efficiency of 19.9% and a maximum current efficiency of 45.2 cd/A.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.156-161
• /
• 2001

Various oxidation states of Polyaniline(PANI) were chemically synthesized, and characterized by FT-IR, UV-Vis, GPC, TG-DTA, Single layer light emitting diodes(LED) were perpared by spin coating of LEB-PANI solutions which have various oxidation states onto an ITO substrate and subsequent vacuum deposition of aluminum top electrode and then current-voltage characteristics. EL spectrum was investigated It was found that ${\pi}$-${\pi}$* transition were shifled to longer wavelength and molecular excition transition were decreased in the UV-Vis spectra and the intensity of EL and PL were increased as the contents of fully reduced form LEB increased. The turn-on voltage of ITO/LEB/AI structured LED was 5 V. It was found that the white light was emitted only from the phase with reduced epeat unit.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1027-1032
• /
• 1996

The auto-illumination controller for office, residence, and so on was studied. The system consists of parts of a power supply, a signal oscillator, a lamp controller and two kinds of sensor. The lamp controller has two thyristors triggered by the IR sensor(SCRI) and CdS sensor(SCR2) respectively, When the illuminance around this system is higher than operating value of its sensor, lamp is turned off automatically. Otherwise, the light of lamp gets dim by CdS sensor. In case IR sensor senses the body heat of people around itself, the illuminance of the lamp gets maximum. The illuminance of the lamp can be changed dimmly by control of the variable resistor (RV) connected with SCR2 in series. The turning - on time of the lamp can be also controlled using a variable resistor(Rt) connected with a signal oscillator in parallel. Changing resistance Rt changes the time constant(.tau.), which triggers the gate of SCR2. Though people left the surrounding of lamp, the lamp keeps light for a while.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.594-598
• /
• 2011

We study on the preparation of green emitting materials for organic light emitting device. 3-chromonealdehyde derivatives possessing a conjugated structure, which were composed of electron acceptor of 3-chromonealdehydes and electron donor of diamines, were synthesized by dehydration-condensation process. The structural properties of reaction products were analyzed FT-IR and $^1H-NMR$ spectroscopy. The thermal stabilities and reactivities were measured by melting points and yields. The UV-visibles and PL properties can be determined by excitation spectra and emission spectra, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.226-226
• /
• 2016

PHOLED devices which have the structure of ITO/HAT-CN(5nm)/NPB(50nm)/EML(30nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) are fabricated to investigate the green emission profile in EML by using a gasket doping method. CBP and Ir(ppy)3 (2% wt) are co-deposited homogeneously as a background material of EML for green PHOLED, then a 5nm thickness of additionally doped layer by Ir(btp)2 (8% wt) is formed as a profiler of the green emission. The total thickness of the EML is maintained at 30nm while the distance of the profiler from the HTL/EML interface side (x) is changed in 5nm steps from 0nm to 25nm. As shown in Fig. 1, the green (513nm) peak from Ir(ppy)3 is not observed when Ir(btp)2 is also doped homogeneously because Ir(ppy)3 works as an gasket dopant of the Ir(btp)2 :CBP system. Therefore, in this experment, Ir(btp)2 can be used as a profiler of the green emission in CBP:Ir(ppy)3 system. The emission spectra from the PHOLED devices with different x are shown in Fig. 2. In this gasket doping system, stronger red peak means more energy transfer from green to red dopant or higher exciton density by green dopant. To find the green emission profile, the external quantum efficiency (EQE) at 3mA/cm2 for red peaks are calculated. More green light emission at near EML/HBL interface than that of HTL/EML is observed (insert of Fig. 2). This means that the higher exciton density at near EML/HBL interface in homogeneously doped CBP with Ir(ppy)3. As shown in Fig. 3, excitons can be quenched easily to HTL(NPB) because the T1 level of HTL(2.5eV) is relatively lower than that of EML(2.6eV). On the other hand, the T1 level of HBL(2.7eV) is higher than that of EML.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.199-203
• /
• 2008

High-efficiency phosphorescent organic light emitting diodes using TCTA-TAZ as a double host and $Ir(ppy)_3$ as a dopant were fabricated and their electro-luminescence properties were evaluated. The fabricated devices have the multi-layered organic structure of 2-TNATA/NPB/(TCTA-TAZ) : $Ir(ppy)_3$/BCP/SFC137 between an anode of ITO and a cathode of LiF/AL. In the device structure, 2-TNATA[4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] and NPB[N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] were used as a hole injection layer and a hole transport layer, respectively. BCP [2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline] was introduced as a hole blocking layer and an electron transport layer, respectively. TCTA [4,4',4"-tris(N-carbazolyl)-triphenylamine] and TAZ [3-phenyl-4-(1-naphthyl)-5-phenyl-1,2,4-triazole] were sequentially deposited, forming a double host doped with $Ir(ppy)_3$ in the [TCTA-TAZ] : $Ir(ppy)_3$ region. Among devices with different thickness combinations of TCTA ($50\;{\AA}-200\;{\AA}$) and TAZ ($100\;{\AA}-250\;{\AA}$) within the confines of the total host thickness of $300\;{\AA}$ and an $Ir(ppy)_3$-doping concentration of 7%, the best electroluminescence characteristics were obtained in a device with $100\;{\AA}$-think TCTA and $200\;{\AA}$-thick TAZ. The $Ir(ppy)_3$ concentration in the doping range of 4%-10% in devices with an emissive layer of [TCTA ($100\;{\AA}$)-TAZ ($200\;{\AA}$)] : $Ir(ppy)_3$ gave rise to little difference in the luminance and current efficiency.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.246-253
• /
• 2016

Infrared (IR) imaging has been researched for various applications such as surveillance. IR radiation has the capability to detect thermal characteristics of objects under low-light conditions. However, automatic segmentation for finding the object of interest would be challenging since the IR detector often provides the low spatial and contrast resolution image without color and texture information. Another hindrance is that the image can be degraded by noise and clutters. This paper proposes multi-level segmentation for extracting regions of interest (ROIs) and objects of interest (OOIs) in the IR scene. Each level of the multi-level segmentation is composed of a k-means clustering algorithm, an expectation-maximization (EM) algorithm, and a decision process. The k-means clustering initializes the parameters of the Gaussian mixture model (GMM), and the EM algorithm estimates those parameters iteratively. During the multi-level segmentation, the area extracted at one level becomes the input to the next level segmentation. Thus, the segmentation is consecutively performed narrowing the area to be processed. The foreground objects are individually extracted from the final ROI windows. In the experiments, the effectiveness of the proposed method is demonstrated using several IR images, in which human subjects are captured at a long distance. The average probability of error is shown to be lower than that obtained from other conventional methods such as Gonzalez, Otsu, k-means, and EM methods.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.209-217
• /
• 2002

We studied the mechanism of orientation of polyimide molecules which were irradiated by polarized UU (PUV) using polarized Fourier transform infrared (FT-IR) spectroscopy and ultraviolet (UV) spectroscopy, According to the measured UV spectra, we found PI films mainly absorb UV light less than 350 nm wavelength, therefore, UV light less than 360 nm induces photochemical reaction of PI. PUV irradiation of PI films caused decrease of all peak intensities in the FT-IR spectra. except the newly formed broad peak at $3244 cm^{-1}$, due to degradation of the PI molecules. The remaining PI molecules after photo-degradation showed predominantly perpendicular molecular orientation to the irradiated PUV polarization direction, due to the preferential degradation of PI molecules parallel to irradiated PUV polarization direction. However the rubbing of PI films induced reorientation of the PI molecules parallel to the rubbing direction. We also investigated the alignment of the liquid crystal by rubbing or PUV irradiation. Liquid crystals align perpendicular to the PUV polarization direction and parallel to the rubbing direction.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.196-201
• /
• 2016

We studied white tandem organic light-emitting diodes using blue and red phosphorescent materials. Optimized white single phosphorescent OLED was fabricated using CBP : FIrpic (12 vol.%, 9 nm) / CBP : $Ir(mphmq)_2acac$ : $Ir(ppy)_3$ (1 vol.%, 1 vol.%, 1 nm) as emitting layer (EML). The single phosphorescent OLED showed maximum current efficiency of 22.5 cd/A, white emission with a Commission Internationale de l'Eclairage (CIE) coordinates of (0.342, 0.37) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.339{\pm}0.008$, $0.371{\pm}0.001$) from 500 to $3,000cd/m^2$. Optimized white tandem phosphorescent OLED was fabricated using CBP : FIrpic (12 vol.%, 7 nm) / CBP : $Ir(mphmq)_2acac$ : $Ir(ppy)_3$ (1 vol.%, 1 vol.%, 3 nm) as EML. The tandem phosphorescent OLED showed maximum current efficiency of 49.2 cd/A, white emission with a CIE coordinates of (0.376, 0.366) at $1,000cd/m^2$, variation of CIE coordinates with ($0.375{\pm}0.004$, $0.367{\pm}0.002$) from 500 to $3,000cd/m^2$. Maximum current efficiency of tandem phosphorescent OLED was more twice as high as single phosphorescent OLED. Our results suggest that tandem phosphorescent OLED was possible to control CIE coordinates and produce excellent color stability.

• Journal of Information Display
• /
• v.3 no.1
• /
• pp.6-10
• /
• 2002

We have synthesized a new green Ir(III) complex fac-tris-(3-methyl-2-phenyl pyridine)iridium(III) $Ir(mpp)_3$ and fabricated phosphorescent polymer light-emitting device using it as a triplet emissive dopant in PVK. $Ir(mpp)_3$ showed absorption centered at 388 nm corresponding to the $^1MLCT$ transition as .evidenced by its extinction coefficient of the order of $10^3{\cdot}$ From the PL and EL spectra of the $Ir(mpp)_3$ doped PVK film, the emission maximum was observed at 523 nm, due to the radiative decay from the $^3MLCT$ state to the ground state, confirming a complete energy transfer from PVK to $Ir(mpp)_3$. The methyl substitution has probably caused a red shift in the absorption and emission spectrum compared to $Ir(mpp)_3$. The device consisting of a 2 % doped PVK furnished 4.5 % external quantum efficiency at 72 $cd/m^2$ (current density of 0.45 $mA/cm^2$ and drive voltage of 13.9 V) and a peak luminance of 25,000 $cd/m^2$ at 23.4 V (494 $mA/cm^2$). This work demonstrates the impact of the presence of a methyl substituent at the 3-position of the pyridyl ring of 2-phenylpyridine on the photophysical and electroluminescence properties.