• Macromolecular Research
• /
• v.9 no.2
• /
• pp.116-121
• /
• 2001

A series of poly(1,4-phenylenevinylene-alt-3-alkyl-2,5-thienylenevinylene)s (alkyl = hexyl [PPV-alt-6-TV] and octyl (PPV-alt-8-TV] group) have been synthesized by the Heck coupling reaction. These polymers were characterized using $^1$H-NMR, FT-IR spectroscopy, and thermogravimetric analysis (TCA). They are solvent processible and have obviously copolymeric structure. The photophysical properties of the polymers were investigated using UV-visible and steady-state photoluminescence(PL) spectroscopy. We studied the change of light-emitting properties by incorporating the thiophene group into the PPV polymer backbone using alternating copolymer system. The properties of two synthesized polymers are very similar, but they exhibited apparent changes of light-emitting properties compared with other PPV backbone based polymers. The broad absorption bands from 350 to 570 nm are due to $\pi$-$\pi$* transitions of the polyconjugated systems. The absorption maxima of the two polymers were found at about 452 and 448 nm for PPV-alt-6-TV and PPV-alt-8-TV, respectively. The copolymers showed broad PL spectra between 550 and 700 nm without vibronic bands and PL emission maxima of PPV-alt-6-TV and PPV-alt-8-TV are about 620 and 605 nm, respectively. The copolymers exhibited the red emission (PPValt-6-TV), but more red shifted emissions are needed to obtain real red color.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.47.3-48
• /
• 2016

The zodiacal light (ZL), combination of the sunlight scattered by and the infrared light emitted by the interplanetary dust (IPD) particles, changes with time due to the asymmetric distribution of the particles with respect to the Earth's orbit. Especially, the variation of the ZL brightness toward the ecliptic poles are useful to probe the properties of the global distribution of the IPD because we can evade the effect of the small scale structures, such as the asteroidal dust bands. The ecliptic poles are frequently visited by the infrared (IR) space telescopes owing to their sun-synchronous orbits or for specific purposes. We collect and analyze the observations toward the ecliptic poles by COBE/DIRBE, AKARI, and MIRIS, covering the wavelengths from about 1 to $25{\mu}m$. The observed seasonal variations of the ZL are modeled with a simple IPD cloud model to derive cloud parameters. The parameters are compared with those of the empirical cloud models by Kelsall et al. (1998) and Kondo et al. (2016), and the discrepancies are discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.402-403
• /
• 2007

High-efficiency white organic light-emitting diodes (WOLEDs) were fabricated with two emissive layers and a spacer was sandwiched between two phosphorescent dyes which were, bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (FIrpic) as the blue emission and bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate $((acppy)_2Ir(acac))$ as the red emission. This spacer effectively prevented a triple-triple energy transfer between the two phosphorescent emissive layers with blue and red emission that was showed a improved lifetime. The white device showed Commission Internationale De L'Eclairage $(CIE_{x,y})$ coordinates of (0.33, 0.42) at $22400\;cd/m^2$, a maximum luminance of $27300\;cd/m^2\;at\;0.388\;mA/cm^2$, and a maximum luminous efficiency of 26.9 cd/A.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.56-59
• /
• 2004

HgTe and HgTe/CdTe core-shell structured nanocrystals(NCs) were synthesized in aqueous solution by colloidal method. HgTe and HgTe/CdTe NCs structure showed very similar XRD patterns because of the same lattice constant and crystal structure of both samples. The absorption and photoluminescence(PL) spectrum of the synthesized HgTe NCs revealed the strong exitonic peak in the IR region. The PL spectrum of HgTe/CdTe NCs have the intense peak in about 700nm shorter than that of HgTe by 400nm. The photocurrent measurement of colloidal NCs are performed using He-Ne laser for light source. The photocurrent of HgTe NCs shows the instant increased current response to light, but HgTe/CdTe NCs revealed a decreased current when lighted to the sample. In the vacuum condition, it shows reverse result that current increased under the illumination of light and it is thought that the molecules like the hydro-oxygen gas in the air give an important effect on the current mechanism.

• Korean Journal of Materials Research
• /
• v.31 no.6
• /
• pp.353-366
• /
• 2021

In this study, photocatalytic degradation of ammonia in petrochemical wastewater is investigated by solar light photocatalysis. Two-dimensional ultra-thin atomic layer structured MoS₂ are synthesized via a simple hydrothermal method. We examine all prepared samples by means of physical techniques, such as SEM-EDX, HRTEM, FT-IR, BET, XRD, XPS, DRS and PL. And, we use fullerene modified MoS₂ nanosheets to enhance the activity of photochemically generated oxygen (PGO) species. Surface area and pore volumes of the MoS₂-fullerene samples significantly increase due to the existence of MoS₂. And, PGO oxidation of MB, TBA and TMST, causing its concentration in aqueous solution to decrease, is confirmed by the results of PL. The generation of reactive oxygen species is detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and the PGO effect increase in the case with modified fullerene. The experimental results show that this heterogeneous catalyst has a degradation of 88.43% achieved through visible light irradiation. The product for the degradation of NH₃ is identified as N₂, but not NO^2- or NO^3-.

• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.153-158
• /
• 2001

Nine disperse dyes have been synthesized by diazotization of 2-amino-4-(p-nitrophenyl)-5-nitrothiazole and coupled to substituted N-alkylanilines. Spectral properties in the IR and visible range of the dyes obtained were investigated. The dyeing performance of these dyes was assessed on nylon and polyester fibers. These dyes were found to give reddish brown to bluish violet shades on dyeing with very good depth, brightness and levelness on nylon and polyester fibers. The dyed fibers showed fairly good light fastness, very good to excellent fastness to wash, rubbing, perspiration and excellent fastness to sublimation. The dyebath exhaustion and fixation on the fiber were found to be very good.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1275-1279
• /
• 2010

We have carried out the surface modification of photocatalytic $TiO_2$ with triethoxysilane through dehydrogenation reaction and characterized the modified photocatalyst by spectroscopic methods, such as FT-IR, solid-state $^{29}Si$ MAS NMR, XPS, and XRF, etc. We also examined photocatalytic activity of the immobilized photocatalytic titanium dioxide with triethoxysilane by decolorization reaction of dyes such as cong red and methylene blue under visible light. Dispersion test showed that the photocatalytic titanium dioxide immobilized with triethoxysilane group has kept higher dispersibility than titanium dioxide itself. No appreciable precipitation takes place even after standing for 24 h in the 4:6 mixture ratio of ethanol and water.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.274-274
• /
• 2009

고효율 결정질 실리콘 태양전지 구조를 갖기 위해서는 기본적으로 광포획 기능이 고려된 기판이 고려되어야 한다. 본 실험에서는 2-step 습식공정을 이용하여 기판의 반사율을 기존 대비 절반 이하로까지 줄일 수 있는 저반사율을 갖는 표면구조를 얻을 수 있었다. 일반적인 텍스처링 공정을 NaOH와 TMAH등을 이용하여 10um이하의 피라미드 구조를 통해 평균반사율을 10~13%수준을 얻었고, metal assist etching을 이용하여 추가적인 나노 텍스처링을 적용하였다. 전체적인 2-step에칭을 적용하여 평균 반사율을 5%이하까지 줄일 수 있었다. 이는 전반적으로 나노구조 형성으로 인하여 단파장쪽의 반사율이 적게 나오고 IR 파장쪽의 반사율도 같이 낮아짐으로써 저반사율이 달성되었다. 2-step을 이용한 나노 텍스처링 공정 최적화와 반사방지막을 증착하여 이에 대한 효과를 연구하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.45-45
• /
• 2009

This paper describes the formation of porous 3C-SiC by anodization. 3C-SiC thin films were deposited on p-type Si(100) substrates by APCVD using HMDS (Hexamethyildisilane: $Si_2(CH_3)_6$). UV-LED(380 nm) was used as a light source. The surface morphology was observed by SEM and the pore size was increased with increase of current density. Pore diameter of 70 ~ 90 nm was achieved at 7.1 $mA/cm^2$ current density and 90 sec anodization time. FT-IR was conducted for chemical bonding of thin film and porous 3C-SiC. The Si-H bonding was observed in porous 3C-SiC around wavenumber 2100 $cm^{-1}$. PL shows the band gap enegry of thin film (2.5 eV) and porous 3C-SiC (2.7 eV).

• East Asian Journal of Business Economics (EAJBE)
• /
• v.2 no.4
• /
• pp.48-55
• /
• 2014

Indian railways has been regularly in the news albeit for the wrong reasons. The frequency with which train accidents have been taking place has led to serious doubts in the public mind about the safety of rail travel and also the health of the network. Against this background, an attempt is made in this paper to assess the trends in railway accidents for the period from 2000-01 to 2009-10. The paper also highlighted the various measures taken by IR to prevent accidents to ensure safety to the public.