• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.518-525
• /
• 2010

Infrared (IR) thermography which is the technique for detecting invisible infrared light emitted by objects due to their surface thermal condition and for producing an image of the light has been applied in various field without damaging the objects. It also could be used indirectly to examine the inside of an object. In this study, insulation property of wooden house in Korea Forest Research Institute (KFRI) was evaluated with according to "Thermal performance of building - Quantitative detection of thermal irregularities in building envelopes - infrared method (KS F 2829)". This method uses "Temperature Difference Ratio (TDR)" between outdoor wall surface and indoor wall surface of wooden building for evaluating its thermal performance. The thermal performance of a room on the 2nd floor of the wooden house was focused in this study and IR thermography on the indoor and outdoor surface of the house was captured by IR camera. Heat loss from the corner and the window of the wooden house as well as wall of the house was quantitatively evaluated and the invisible heat loss in the wall was detected. It is expected that the results from this study could contribute to improve the wooden building energy efficiency.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.169-174
• /
• 2009

Silicone hydrogels incorporated with poly(ethylene glycol)(PEG) were prepared and characterized to evaluate the effects of PEG on contact lenses. The silicone hydrogels were copolymerized with methacryloxypropyl tris(trimethylsiloxy) silane (TRIS), methyl methacrylate (MMA), N,N-dimethyl acrylamide (DMA) and PEG-containing monomers such as poly(ethylene glycol) methyl ether methacrylate (PEG- MEM). The silicone hydrogels were characterized using Fourier transform infrared spectroscopy (FT-IR), electron spectroscopy of chemical analysis (ESCA), and scanning electron microscopy (SEM). Water absorbance, water contact angle and light transmittance of the silicone hydrogels were evaluated. The experiments of protein adsorption were also carried out to evaluate the protein adsorption in tears. The peak intensity of C-O bond was increased by the incorporation of PEG-containing monomers and thus PEG incorporation into silicone hydrogels could be confirmed. Phase separation was not shown by the SEM observation of the cross-section of silicone hydrogels. Water absorbancy was increased, while water contact angle and light transmittance were decreased with increasing incorporation of the PEG-containing monomers. The absorption of proteins in tears, albumin, lysozyme and $\gamma$-globulin, on the surface of silicone hydrogels was decreased with increasing incorporation of the PEG-containing monomers.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.139-147
• /
• 2019

A MANPADS(Man Portable Air Defense System), which tracks infrared energy, is light enough for individuals to carry and can against to a variety of aircraft, making it widely deployed around the world, posing a major threat to aircraft. A flare has been developed as an IRCM(Infrared Countermeasures) that protects the life of friendly aircraft and combatants by deceiving such guided missiles. However, DIRCM, which can overcome the problems of existing IRCM, is being developed mainly in some developed countries, and the need for it has been increasing gradually. This paper modeled first generation IR seeker of AM modulation method, the second generation IR seeker of FM modulation method, and the third generation IR seeker of pulse modulation method among various MANPADS, and modeled the scattering light phenomenon in the seeker when laser beams are investigated in DIRCM. Using this, jamming simulations were performed in various engagement environments of the MANPADS and aircraft equipped with DIRCM, and the miss distance of the guided missiles and aircraft were analyzed. Simulation results show that DIRCM, which irradiates a modulated laser beam with one jamming code, deceives both first, second and third generation MANPADS at 1km and 2km of engagement distance. In particular, the survival rate of aircraft equipped with DIRCM increased when the distance of engagement increased from 1km to 2km, and the survival rate was at least 99% at 2km of engagement distance.

• Journal of Powder Materials
• /
• v.16 no.3
• /
• pp.196-202
• /
• 2009

A visible-light photoactive $TiO_{2-x}N_x$ photocatalyst was synthesized successfully by means of cogrinding of anatase-$TiO_2(a-TiO_2)$ in $NH_3$ ambient, followed by heat-treatment at $200^{\circ}C$ in air environment. In general, it is well known that the grinding-operation induces phase transformation of a-$TiO_2$ to rutile $TiO_2$. This study investigates the influence of the amount of $NH_3$ gas on the phase transformation rate of a-$TiO_2$ and enhancement of visible-light photocatalytic activity, and also examines the relation between the photocatalytic activity and the period of grinding time. The phase transformation rate of a-$TiO_2$ to rutile is retarded with the amount of NH3 injected. And the visible-light photocatalytic activity of samples, was more closely related to the period of grinding time than $NH_3$ amount injected, which means that the doping amount of nitrogen into $TiO_2$ more effective to mechanical energy than $NH_3$ amount injected. XRD, XPS, FT-IR, UV-vis, Specific surface area (SSA), NOx decomposition techniques are employed to verify above results more clearly.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.133-144
• /
• 1990

The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.283-285
• /
• 2013

피부의 관리를 위한 방법 중 광을 이용한 케어는 비침습적인 방법으로 세포를 활성화 시켜 도움을 주는 매우 유용한 방법이다. 최근에는 낮은 에너지의 LED를 광원으로 이용하는 LLLT (Low Level Light Therapy)가 많이 적용이 된다. 본 논문에서는 피부 미용기기에서 많이 사용되고 있는 가시광 영역의 적색과 황색, 그리고 적외선 영역의 LED를 이용하여 array를 제작하였다. 제작된 LED array는 5V의 전압과 50mA의 전류로 구동되며, 적색이 평균 $10.7mW/cm^2$, 황색이 평균 $1.8mW/cm^2$, 적외선이 평균 $5.5mW/cm^2$의 광출력을 갖는다. 이를 배양된 human cell plate에 각각 10, 20, 40분의 시간으로 조사하였으며, LED array와 조사면 사이에 20 mm의 거리를 두어 균일한 광량이 조사 될 수 있도록 하였다. 실험결과, wound healing의 경우는 적색광을 조사하였을 때, injury line의 길이가 $604.36{\mu}m$에서 10분 조사 시 $368.92{\mu}m$, 20분 조사 시 $298.04{\mu}m$, 40분 조사 시 $491.22{\mu}m$로 줄어드는 효과를 보였으며 특히 20분간 조사하였을 경우의 효과가 가장 좋았다. Cell regeneration의 경우는 황색광을 20분간 조사하였을 경우에 UV 에 의해 손상된 세포 수가 가장 크게 줄어드는 것을 확인할 수 있었다. 결과적으로 photorejuvenation 효과를 줄 수 있는 wound healing과 cell regeneration에는 적색 및 황색광의 LED array를 20분간 조사하였을 때가 가장 효과적이었으며, 적외광의 경우에는 모든 실험에서 효과가 없음을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.33-40
• /
• 2007

We have designed and synthesized three Zn(II)-porphyrin derivatives, such as Zn(II) porphyrin ([G-0]Zn-P1) and aryl ether-typed dendron substituted Zn(II)-porphyrin derivatives ([G-1]Zn-P1 and [G-1]Zn-P-CN1). Their chemical structures were characterized by 1H-NMR, FT-IR, UV-vis absorption, EI-mass, and MALDI-TOF mass spectroscopies. Their electrochemical properties were studied by cyclic voltammetry measurement. These Zn(II)-porphyrin derivatives have been used to fabricate dye-sensitized solar cells (DSSCs) based on solid polymeric electrolytes as dye sensitizers and their device performances were evaluated by comparing with that of a standard Ru(II) complex dye. [G-1]Zn-P-CN1 showed the enhanced power conversion efficiency than those of other porphyrin derivatives, as expected. Short-circuit photocurrent density (Jsc), open-circuit voltage (Voc), fill factor (FF), and power conversion efficiency (η) of solid-typed DSSC for [G-1]Zn-P-CN1 were evaluated to be Jsc = 11.67 mA/cm2, Voc = 0.51 V, FF = 0.46, and η = 2.76%, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.486-490
• /
• 2011

To investigate the effect of two-emission-layer structure on the emission characteristics of the phosphorescent white organic light-emitting diodes (PHWOLEDs), the PHWOLEDs with two different emission layers, blue EML(29 nm, FIrpic-doped mCP) and red EML(1 nm, Ir(pq)$_2$acac-doped CBP)), following host-guest system were fabricated. The bi-layered blue EML was composed of mCP:FIrpic (20 nm, 7 vol.%) and mCP:FIrpic (9 nm, 7, 10, 15, 20, and 25 vol.%, respectively). When the concentration of FIrpic was increased from 7 to 15 vol.%, light emission luminance, current efficiency, and external quantum efficiency were increased. On the contrary, when the concentration of FIrpic was increased to more than 20 vol.%, light emission luminance, current efficiency, and external quantum efficiency were decreased. The PHWOLEDs with the bi-layered blue EML structure of mCP:FIrpic (20 nm, 7 vol.%) and mCP:FIrpic (9 nm, 15 vol.%) showed current efficiency of 29.7 cd/A and external quantum efficiency (EQE) of 16.6% at 1,000 $cd/cm^2$.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.642-651
• /
• 1996

The purpose of this study was to evaluate the relationship between monomer compositions and the changes in the degree of conversion in the various layers of composites after additional heat curing. Four types of composites and 3 types of inlay ovens were used in this study. Composite was placed in a 4-mm thick teflon mold, and light cured from the top for 60 seconds. Ten samples were prepared for each composite ; 5 of these were additionally heat cured in an inlay oven as the manufacturer recommended. After light curing or light and heat curing, the samples were sectioned into four parts and assigned to groups A, B, C, or D according to their distance from the light source. These sections were then thinned to 50-$70{\mu}m$, and these wafers were analyzed with a Fourier Transform Infrared Spectrometer(FI-IR) to determine the degree of conversion. A standard baseline technique was used to calculate the degree of conversion. $^{13}C$ NMR spectra of bis-GMA, TEGDMA and bis-EMA, were acquired using a Varian Gemini spectrometer operated at 200 MHz. $CDCl_3$ solvent was used for qualitative analysis. The degree of conversion was affected by bis-GMA : TEGDMA ratio but it seemed to be also affected by other factors. When the composites were heat cured, significant increases in the degree of conversion were noted throughout the samples, but the amount of increase differed between materials. Thus, clinical performance of a heat-treated composite inlay may be different depending on materials.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.55.2-56
• /
• 2021

The progenitor of Type Ia supernovae (SNe Ia) is mainly believed to be a close binary system of acarbon-oxygen white dwarf (CO WD) and non-degenerate companion (single degenerate) or another WD (double degenerate). However, it is unclear which system is more prevalent. Here, we present a high cadence optical/Near-IR light curve of normal but slightly faint type Ia SN 2019ein from IMSNG project. We fit the early light curve (t <+8.3 days from the first detection) with various models to find the shock-heated cooling emission from SN ejecta-companion interaction. No significant shock-heated cooling emission is found, from which we constrain the progenitor star size as the following. The upper limit (R_upper,*) of the companion size in R-band is ~0.2R_⊙ when forcing the first light time (t_fl) to have one value and ~0.9R_⊙ when using the mean value of tfl from the fitting in each band. Assuming the source of the I-band curve is almost powered from the radioactive decay, we obtained R_upper,*~1.2R_⊙. The early B-V color curve is in agreement with the model color curve of the 2M_⊙ main sequence companion. These results allow us to at least rule out large stars like red giants as a companion star of the binary progenitor system of this supernova. B-R and V-R color do not show any significant signs of a red bump, which shows a thin helium shell (MHe<0.1M_⊙) for the sub-Mch WD (double detonation model). In addition, we estimated the distance to NGC 5353 as 37.098±0.028Mpc.