• 한국재료학회지
• /
• 제30권9호
• /
• pp.489-494
• /
• 2020

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I₂ with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.541-545
• /
• 2005

Flowers of Erigeron annuus L. were extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH, and H$_2$O. Repeated silica gel and OD S column chromatography of the EtOAc fraction led to the isolation of a sterol, through activityguided fractionation, using ACAT inhibitory activity measurements. From the physico-chemical data, including NMR, MS, and IR, the chemical structure of the compound was determined to be an ergosterol peroxide (1), which has been isolated for the first time from this plant. This compound exhibited hACAT-1 and Lp-PLA$_2$ inhibitory effects, with inhibitory values of 51.6 ${\pm}$ 0.9 and 51 .7 ${\pm}$ 1.2%, at a treatment concentration of 0.23 mM.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.550-556
• /
• 2005

The flower of Campsis grandiflora K. Schum. Was extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH and H$_2$O. From the EtO Ac fraction, seven triterpenoids were isolated through the repeated silica gel, ODS column chromatographies and preparative HPLC. From the result of physico- chemical data including NMR, MS and IR, the chemical structures of the compounds were determined as 3${\beta}$-hydroxyolean-12-en-28-oic acid (oleanolic acid, 1), 3${\beta}$-hydroxyurs-12-en-28-oic acid (ursolic acid, 2), 3${\beta}$-hydroxyurs-12-en-28-al (ursolic aldehyde, 3), 2${\alpha}$,3${\beta}$-dihydroxyolean-12-en-28-oic acid (maslinic acid, 4), 2${\alpha}$,3${\beta}$-dihydroxyurs-12-en-28-oic acid (corosolic acid, 5), 3${\beta}$,23-dihydroxyurs-12- en-28-oic acid (23-hydroxyursolic acid ,6) and 2${\alpha}$,3${\beta}$,23-trihydroxyolean-12-en-28- oic acid (arjunolic acid, 7). These teriterpenoids were isolated for the first time from this plant. Also, compounds 4, 5, 6, and 7 revealed relatively high hACAT-1 inhibitory activity with the value of 46.2${\pm}$1.1, 46.7${\pm}$0.9, 41.5${\pm}$1.3 and 60.8${\pm}$1.1% at the concentration of 100${\mu}$g/mL, respectively.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.233-238
• /
• 2003

Ferromagnetic tunnel junctions, Ta/Cu/Ta/NiFe/Cu/$Mn_{75}$ $Ir_{25}$ $Co_{70}$ $Fe_{30}$/Al-oxide, were fabricated by do magnetron sputtering and plasma oxidation process. The effect of annealing temperature on the local transport properties of the ferromagnetic tunnel junctions was studied using contact-mode Atomic Force Microscopy (AFM). The current images reflected the distribution of the barrier height determined by local I-V analysis. The contrast of the current image became more homogeneous and smooth after annealing at $280^{\circ}C$. And the average barrier height $\phi_{ave}$ increased and its standard deviation $\sigma_{\phi}$ X decreased. For the cases of the annealing temperature more than $300^{\circ}C$, the contrast of the current image became large again. And the average barrier height $\phi_{ave}$ decreased and its standard deviation $\sigma_{\phi}$ increased. Also, the current histogram had a long tail in the high current region and became asymmetric. This result means the generation of the leakage current that is resulted from the local generation of a low barrier height region. In order to obtain the high tunnel magnetoresistance(TMR) ratio, the increase of the average barrier height and the decrease of the barrier height fluctuation must be strictly controlled.led.

• Journal of Applied Biological Chemistry
• /
• 제59권2호
• /
• pp.91-94
• /
• 2016

오디(Morus alba L.) 를 실온에서 80 % MeOH 수용액으로 추출하고 이 추출물을 EtOAc, n-butyl alcohol, 그리고 물 분획으로 나누었다. EtOAc 분획에 대하여 $SiO_2$ 및 ODS column chromatography를 반복 실시하여 2종의 Diels-Alder 부가화합물을 분리, 정제하였다. NMR, IR 및 ESI/MS data를 해석하여, 화합물 1과 2를 mulberrofuran E와 chalcomoracin 으로 각각 구조동정 하였다. 두 화합물 모두 오디로부터는 이번 실험에서 처음으로 분리되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.130.1-130.1
• /
• 2013

We made attempts to improve photocatalytic activity of $TiO_2$ nanoparticles under visible light exposure by combining two additional treatments. N-doping of $TiO_2$ by ammonia gas treatment at $600^{\circ}C$ increased absorbance of visible light. By coating thin film of polydimethylsiloxane (PDMS), and subsequent vacuum-annealing at $800^{\circ}C$, $TiO_2$, became more hydrophilic, thereby enhancing photocatalytic activity of $TiO_2$. Four types of $TiO_2$ samples were prepared, bare-$TiO_2$, hydrophilic-modified $TiO_2$ ($h-PDMS/TiO_2$), N-doped $TiO_2$ ($N/TiO_2$) and hydrophilic-modified and N-doped $TiO_2$ ($h-PDMS/N/TiO_2$). Adsorption capability was evaluated under dark condition and photocatalytic activity of $TiO_2$ was evaluated by photodegradation of MB under blue LED (400 nm< ${\lambda}$) irradiation. N-doping on $TiO_2$ was characterized using XPS and hydrophilic modification of $TiO_2$ surface was analyzed by FT-IR spectrometer. It was found that N-doping and hydrophilic modification both had positive effect on enhancing adsorption capability and photocatalytic activity of $TiO_2$ at the same time. Particularly, N-doping enhanced visible light absorption of $TiO_2$, whereas hydrophilic surface modification increased MB adsorption capacity. By combining these two strategies, photocatalytic acitivity under visible light irradiation became the sum of individual effects of N-doping and hydrophilic modification.

• Food Science and Biotechnology
• /
• 제17권6호
• /
• pp.1214-1220
• /
• 2008

Secondary metabolites from the fruit body of Phellinus linteus were evaluated for their proliferative effect on human osteoblast-like cells. 3-[4,5-Dimethylthiazole-2-y1]-2,5-diphenyl-tetraxolium bromide (MTT) assay and alkaline phosphatase (ALP) activity assay were used to assess the effect those isolates on the human osteoblast-like cell line (Saos-2). Activity-guided fractionation led to the isolation of ALP-activating phenolic compounds through the extraction of P. linteus, solvent partitioning, and repeated silica gel and octadecyl silica gel (ODS) column chromatographic separations. From the result of spectroscopic data including nuclear magnetic resonance (NMR), mass spectrometry (MS), and infrared spectroscopy (IR), the chemical structures of the compounds were determined as 4-(4-hydroxyphenyl)-3-buten-2-one(1), 2-(3',4'-dihydroxyphenyl)-1,3-benzodioxole-5-aldehyde (2), 4-(3,4-dihydroxyphenyl)-3-buten-2-one (3), 3,4-dihydroxybenzaldehyde (4), and protocatechuic acid methyl ester (5), respectively. This study reports the first isolation of compounds 1-3 and 5 from P. linteus. In addition, all phenolic compounds stimulated proliferation of the osteoblast-like cells and increased their ALP activity in a dose-dependent manner ($10^{-8}$ to $10^{-1}\;mg/mL$). The present data demonstrate that phenolic compounds in P. linteus stimulated mineralization in bone formation caused by osteoporosis. The bone-formation effect of P. linteus seems to be mediated, at least partly, by the stimulating effect of the phenolic compounds on the growth of osteoblasts.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2253-2261
• /
• 2022

In this study, nano-scaled shielding materials were assembled and fabricated by doping different weight percentages of Nano-mercuric oxide (N-HgO) into Nano-Bentonite (N-Bent) based on using (100-x% N-Bent + x% N-HgO, x = 10, 20, 30, and 40 wt %). The fabricated N-HgO/N-Bent nanocomposites were characterized by FT-IR, XRD, and SEM and evaluated to evaluate their shielding properties toward gamma radiation by using four different γ-ray energies form three point sources; 356 keV from ¹³³Ba, 662 keV from ¹³⁷Cs as well as 1173, and 1332 keV from ⁶⁰Co. The γ-rays mass attenuation coefficients were plotted as a function of the doped N-HgO concentrations into N-HgO/N-Bent nanocomposites. The computed values of mass attenuation coefficients (µ_m), effective atomic number (Z_eff) and electron density (N_el) by the as-prepared samples were found to increase, while the half value layer (HVL) and mean free path (MFP) were identified to decrease upon increasing the N-HgO contents. It was concluded also that the increase in N-HgO concentration led to a direct increase in the mass attenuation coefficient from 0.10 to 0.17 cm²/g at 356 keV and from 0.08 to 0.09 cm²/g at 662 keV. However, a slight increase was observed in the identified mass attenuation coefficients at (1172 and 1332 keV).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.345-346
• /
• 2013

InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.

• Journal of Applied Biological Chemistry
• /
• 제58권2호
• /
• pp.153-155
• /
• 2015

뽕나무(Morus alba L.) 뿌리껍질을 실온에서 80% MeOH 수용액으로 추출하고 이 추출물을 EtOAC, n-BuOH, 그리고 $H_2O$ 분획으로 나누었다. EtOAc 및 n-BuOH 분획에 대하여 silica gel, ODS 및 Sephadex LH-20 column chromatography를 반복 실시하여 4종의 phenolic 화합물을 분리, 정제하였다. NMR, IR, 및 EI/MS 등을 해석하여, norartocarpanone (1), 2',4',7-trihydroxy-(2S)-flavanone (2), methyl-${\beta}$-resorcylate (3), 그리고 (Z)-oxyresveratrol-4-O-${\beta}$-$\small{D}$-glucopyranoside (4)로 각각 구조동정하였다. 화합물 (Z)-oxyresveratrol-4-O-${\beta}$-$\small{D}$-glucopyranoside (4)는 상백피로부터는 이번 실험에서 처음으로 분리되었다.