• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.423-430
• /
• 2017

This paper proposes a control methodology for a high efficiency operation of an inductive power transfer (IPT) converter by combining full bridge (FB) and half bridge (HB) controls. To apply the proposed control to the IPT converter, the characteristics of each control method are analyzed. By examining the output voltages of the IPT converter and a theoretical loss analysis, the control shifting points between FB and HB controls are evaluated in accordance with the coupling coefficients and the load. Based on the control shifting points, the FB-HB control algorithm is implemented. By applying FB-HB control, high efficiency operation at the light load condition can be achieved.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.134-139
• /
• 2017

In this study, an inductive power transfer (IPT) charger for electric vehicles is proposed to improve the entire system efficiency and power density by eliminating the DC-DC converter in the secondary side. In the proposed IPT charger, the DC-link voltage is adjusted according to the coupling coefficient through cascade buck-boost converter in the front-end side, and the bridgeless rectifier performs the charging of battery. The control algorithm for the proposed IPT system is theoretically explained, and the validity of the proposed system is verified by informative simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.35-36
• /
• 2016

본 논문에서는 전기자동차 배터리 충전용 자기 유도 방식 무선 전력 전송 (Inductive power transfer, IPT) 컨버터의 풀브릿지-하프브릿지 가변 제어 방법을 제안한다. 제안한 방법을 검증하기 위해 3.3kW IPT 컨버터에 풀브릿지 제어와 하프브릿지 제어를 각각 적용하여 결합계수 및 부하에 따른 이론적인 손실을 분석하고 고효율 운전 방법을 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.62-63
• /
• 2010

This paper presents a potential for application of Inductive Power Transfer(IPT) to the light railway vehicle system. IPT system allows for a vehicle fitted with existing or new generation batteries to park over a small charging unit and commence charging immediately. Regular charging will allow for smaller batteries to be used in vehicles. In this paper, IPT system uses a full-bridge LLC resonant converter and is possible for the regenerative braking which is an energy recovery mechanism.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.405-408
• /
• 1998

In this paper, a predictive current control of 12-pulse parallel connected dual converter system with interphase transfromer(IPT) is presented. Firstly, 12-pulse parallel connected dual converter system and the predictive current control of this system is discussed. And the validity of the presented system and the excellence of the predictive current control response is proved through the simyulation and experiment result.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.111-120
• /
• 2016

Generally, a single phase H-bridge converter feeding a single primary track is employed in conventional inductive power transfer systems. However, these systems may not be suitable for some high power applications due to the constraints of the semiconductor switches and the cost. To resolve this problem, a novel dual coupled primary tracks IPT system consisting of two high frequency resonant inverters feeding the tracks is presented in this paper. The primary tracks are wound around an E-shape ferrite core in parallel which enhances the magnetic flux around the tracks. The mutual inductance of the coupled tracks is utilized to achieve adjustable power sharing between the inverters by configuring the additional resonant capacitors. The total transfer power can be continuously regulated by altering the pulse width of the inverters' output voltage with the phase shift control approach. In addition, the system's efficiency and the control strategy are provided to analyze the characteristic of the proposed IPT system. An experimental setup with total power of 1.4kW is employed to verify the proposed system under power ratios of 1:1 and 1:2 with a transfer efficiency up to 88.7%. The results verify the performance of the proposed system.

• 전력전자학회논문지
• /
• 제7권4호
• /
• pp.332-338
• /
• 2002

토카막 장치의 초전도 코일에 사용되는 전원 공급장치는 초대형급(20kA) 직류 전원 공급기로서 빠른 전류제어 응답성과 매우 작은 정상상태 리플이 필수적이다. 특히 역전류 공급이 가능한 회생형 컨버터의 운전중 전류 방향이 바뀌는 순간에도 전류기준값을 잘 추종하는 것이 중요하다. 이러한 조건들을 만족시키기 위하여 입력측에 2중 출력($\Delta$, Y)를 갖는 변압기와 출력단에 상간변압기(interphase transformer, IPT)를 이용한 12펄스 싸이리스터 듀얼 컨버터를 설계, 제작하였다. 각 컨버터에서 출력되는 전류의 합이 부하전류 지령치를 따르도록 제어하는 동시에 차 전류의 평균값이 영이 되도록 함으로써 각 컨버터의 부하 분담율을 일정하게 하여 상간 변압기의 포화를 방지한다. 대전류 코일 전류 공급장치의 양방향 전류 제어 성능을 높이기 위하여 위상각 검출 및 게이팅 지연각 구현을 디지털화하고 컨버터 전류방향 정역절환시 초기 응답특성을 개선하는 방법을 제안하였다. 또한 시뮬레이션과 실부하 전류실험을 통해 제안된 제어기의 동작성능을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1038-1039
• /
• 2008

This paper proposes a base models of Hybrid railway vehicle power system. A powered system with fuel cell is regarded as a high current and low voltage source. The design parameters of the system should be chosen by taking into account the characteristics of the fuel cell, so the costs of the power system at given operating conditions can be reduced. Currently, no integrated simulation has been approached to analyze interrelated effects. Therefore, the base models of power conversion system with a PEM fuel cell/IPT system for hybrid powered system that includes the PEM fuel cell stack, DC/DC converter are developed. Concept of bidirectional converter for super capacitor charging system is presented.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.333-344
• /
• 2018

This proposed paper aims for the high efficiency contactless power transfer in household dc power distribution. A 300 W five-level diode clamped multi-level converter with 300 Vdc input dc link bus is employed for the power transferring task and the output voltage range is controlled at 48 Vdc. The inner and outer solenoid coils are used for inductive power transfer (IPT) transformer with the 200 kHz switching frequency for designed power density. Therefore, to achieve the converter efficiency above 95%, the LLC series resonant with fundamental harmonic analysis (FHA) and the calculated switching angles are used as an optimized tool for designing the system resonant tank. The validations of this approached topology are illustrated in both MATLAB/Simulink simulation and implementation.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.237-246
• /
• 2022

This paper proposes a method to adjust the turn ratio of a transformer for the high-efficiency operation of an LLC converter with a wide input range in a wired/wireless integrated charging system for electric vehicles. The characteristics of the inductive power transfer converter in the integrated charging system are analyzed to design the LLC converter, and the DC-link voltage range is derived. The aspect of voltage gain following each parameter of the LLC converter is analyzed, and the resonant network and transformer are designed. Based on the designed parameters, the feasibility of the design and control method is verified by implementing the operation of the LLC converter according to the DC-link and battery voltages.