• Journal of Engineering Education Research
• /
• v.17 no.1
• /
• pp.57-64
• /
• 2014

This study has a purpose mainly to analyze the team interaction change by the duration of time in the Capstone-Design activities according to MBTI Modes. Study objects are four students of Mechanical Engineering at School of Engineering in C University located in Daejeon, and the team interaction change was analyzed through IPA (Interaction Process Analysis) method. From the result, first, ESTP showed the change of increase in interaction by the time duration of initial, mid, late periods in 'social-emotional area: positive' and 'task area: question', and the change of decrease by the same time duration of periods in 'task area: solution'. Also, there was no change in 'social-emotional area: negative' because there was no interaction. Second, ESFJ showed the change of decrease in interaction by the time duration of initial, mid, late periods in 'social-emotional area: positive' and 'task area: question', and the change of increase by the same time duration of periods in 'task area: solution' and 'social-emotional area: negative'. Third, ISTJ showed the change of decrease in interaction by the time duration of initial, mid, late periods in 'social-emotional area: positive', 'task area: question' and 'social-emotional area: negative', and the change of increase by the same time duration of periods in 'task area: solution'. Fourth, ENFP showed the change of decrease by the time duration of initial, mid, late periods in 'social-emotional area: positive', 'task area: solution' and 'social-emotional area: negative', and the change of increase by the same time duration of periods in 'task area: question'.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.224-232
• /
• 2002

CdS-$TiO_2$ nano-composite sol was prepared by the sol-gel method in organic solvents at room temperature and further hydrothermal treatment at various temperatures to control the physical properties of the primary particles. Again, CdS-$TiO_2$ composite particulate films were made by casting CdS-$TiO_2$ sols onto $F:SnO_2$ conducting glass and then heat-treatment at $400^{\circ}C$. Physical properties of these 61ms were further controlled by the surface treatment with $TiCl_4$, aqueous solution. The photo currents and hydrogen production rates measured under the experimental conditions varied according to the $CdS/[CdS+TiO_2]$ mole ratio and the mixed-sol preparation method. For $CdS-TiO_2$ composite sols prepared in IPA, CdS particles were homogeneously surrounded by $TiO_2$ particles. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$. It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.

• Korean journal of food and cookery science
• /
• v.30 no.3
• /
• pp.325-332
• /
• 2014

The purpose of this research is to investigate and analyze food allergy labelling for the arrangement of improvement plans. Survey was done as a quantitative research targeting food industry employees with 399 random workers in Seoul and Gyonggi area. The data was analyzed using SPSS windows (ver. 12.0) for frequency analysis, t-test and factor analysis. The importance and performance of the food allergen labelling were divided by 15 items. Only 43.1% of the workers understood the operation allergic food labels. The first improvement on allergic food labels was "using boldface for food allergen labes". The importance of all of these factors was significantly higher than performance. The selection attributes with relatively low the performance but high importance(2 quadrant) were "consumer education for allergic food labels" and "training of professional counselors on food allergy". Therefore, the factors to be improved through the IPA were consumer education and training of professional counselors. With this research and extended efforts for revision of laws, reliability of food industry and accuracy of food labelling would improve, thereby boosting the productive commercial activities in labelling code.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1738-1742
• /
• 2009

Nanocrystalline Zn$Fe_2O_4$ oxide-semiconductor with spinel structure was synthesized by the polymerized complex (PC) method and investigated for its photocatalytic and photoelectric properties. The observation of a highly pure phase and a lower crystallization temperature in Zn$Fe_2O_4$ made by PC method is in total contrast to that was observed in Zn$Fe_2O_4$ prepared by the conventional solid-state reaction (SSR) method. The band gap of the nanocrystalline Zn$Fe_2O_4$ determined by UV-DRS was 1.90 eV (653 nm). The photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method as investigated by the photo-decomposition of isopropyl alcohol (IPA) under visible light (${\geq}$ 420 nm) was much higher than that of the Zn$Fe_2O_4$ prepared by SSR as well as Ti$O_{2-x}N_x$. High photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method was mainly due to its surface area, crystallinity and the dispersity of platinum metal over Zn$Fe_2O_4$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.25.1-25.1
• /
• 2009

Pattern 웨이퍼 상의 오염입자 제거는 반도체 산업의 주된 과제 중 하나이다. Pattern의 선폭이 좁아짐에 따라 Pattern에 손상을 가하지 않고 오염입자를 제거 하는 것은 더욱 어려워지고 있다. 그뿐만 아니라 기존 습식세정 공정에서의 화학액에 의한 환경오염 및 박막의 손실도 문제가 되기 시작했다. 이러한 문제를 해결하기 위해 기존 세정공정에서 화학액의 농도를 낮추고 Megasonic 등을 이용하여 세정력을 보완하는 방법들이 연구되고 있다. 하지만 습식세정의 경우 강한 화학작용으로 인한 표면 손상 및 물 반점의 문제는 여전히 이슈가 되고 있다. 이러한 단점을 극복하기 위하여 건식 세정법이 제시되고 있으며 이 중 레이저 충격파는 레이저를 집속시켜 발생된 충격파를 이용하여 입자를 제거하기 때문에 국부적인 세정이 가능하며 세정력 조절이 가능하여 손상이 세정을 할 수 있다. 그러나 Pattern의 구조에 의해 전되는 세정력의 차이가 발생하고 Trench 내부의 오염입자제거 문제점이 발생할 수 있다. 시편은 Si STI Pattern을 100 nm PSL Particle (Red Fluorescence, Duke Scientific, USA) 을 50ppm 농도로 희석시킨 IPA에 dipping 하여 오염시킨 후 N2 Gas를 이용하여 건조하여 준비하였다. 그리고 레이저 충격파 세정 시스템은 최대 에너지 1.8 J까지 가능한 레이저를 발생하는 1,064 nm Nd:YAG 레이저를 이용하여 실험하였다. 레이져 충격파 실험은 충격파와 시편사이의 거리, gap distance와 에너지를 변환하여 세정효율을 관찰하였다. 세정효율은 세정 전후의 입자 감소량을 현광현미경 (LV-150, Nikon, Japan)를 이용하여 측정하였다. 그 결과, Trench 내부의 오염입자의 경우 Trench 밖의 오염입자에 비해 세정효율이 떨어지는 것으로 나타났으나 시편과 레이저 초점과의 거리가 가까워짐에 따라 Trench 내부의 오염입자에 대한 세정 효율을 증가시킬 수 있었다.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.3
• /
• pp.9-17
• /
• 2011

Web-based PMIS (Project Management Information System) has played significant role in construction management processes in Korea. As the use of web-based PMIS increases, regular quality assessment to identify user's requirements is necessary. However, there have been rare research efforts for quality assessment of web-based PMIS. This study aims to assess the quality of web-based PMIS, especially ASP-PMIS (Application Service Provider based PMIS) that is widely used in Korean construction industry. The assessment factors of ASP-PMIS quality were adopted from previous research and empirically confirmed using exploratory factor analysis. ISA (Importance-Satisfaction Analysis), which is a variation of original IPA (Importance-Performance Analysis), were selected for the assessment and analysis method in this research. A total of 253 completed questionnaires, composed of 23 assessment items, were collected from the ASP-PMIS users in Korea (construction managers and constructors), and they were used to analyse the quality of the systems. Some possible contributions of this research are: it introduces a simple and easy-to-use tool for assessing the quality of ASP-PMIS with a set of quality assessment factors that are selected from previous researches and empirically tested; it provides the quality assessment results of ASP-PMIS in Korea so that ASP-PMIS providers in Korea can understand the users' opinion on their systems; it also identified that the urgent factors that require immediate attention to improvement. However, further researches are to be required on the following areas: enhancing the quality assessment factors in terms of their relation to the success of ASP-PMIS and to the users' performance; assessing and analyzing the quality of individual ASP-PMIS; establishing continuous improvement systems institutionally and instrumentally.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.487-500
• /
• 2010

The purpose of this study was to provide direction for national parks management policies by analyzing national park facility monitoring data collected every 2 years from 2002 to 2006. The results of this study showed the following. Firstly, 16 mountainous national parks showed increasing values in importance and performance in IPA. The trend analysis results showed that the location and capacity of parking lots as well as the number of rest rooms need to be improved. Secondly, two marine national parks indicated increasing values in campground and coastal facilities in IP value. Also, the location, number, and cleanliness of rest rooms, safety and surface condition of trail, guard rail and warning signs, information signs, drinking water fountains and shower facilities were priorities for improvement. The implications of this study will be able to help by providing guidelines for installation and maintenance of park facilities which in turn will improve visitor satisfaction and establish national park facility operation policies.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.35-42
• /
• 1998

Surface mount technology is the biggest theme in the area of deιIronic component. To miniatunze an electronic component, s such as ferrite chip inductor, the cer뼈lic wet process for green-sheet lamination and/or screen printing method through a s solvent medium system is widely used. The preparation and characterization of NiCuZn Ferrite (NCZF) shurry and the green s sheet using the water mixed binder system has been studied. The 21 vol% of NCZF slurry was prepared by a ball milling. The p polyacrylic vinyl copolymer (Mw; 60,000) was used as a binder. Th$\xi$ mixture of distilled water, isopropyl alcohol (IPA) and 2l butoxy ethanol was used as a dispersion medium. The water content of medium varied from about 40% to 80%. As the results. Thc disp$\xi$rston stability of the NCZF slurry was attributed to the free polymer rather than the electrostatic force of the particle. T The viscosity of the NCZF slurry was greatly depended on the ratio of water content in the medium.

• Land and Housing Review
• /
• v.4 no.3
• /
• pp.287-294
• /
• 2013

Energy saving strategy for public housing is given a sizable portion in Land and Housing corporation. From this reason, the consumer's characteristics and energy consciousness of public housing dweller was derived from field survey for compare with sale housing residents characteristics. Utilities fees (e.g. gas and electric) for public housing residents was about 50 percent of sales housing dweller, but real energy consumption was accounting for 70% of sales housing residents in electric consumption. Among the respondents for public housing dweller up to 80 percentile of end-user comment that they have less demanding utilities fees. Given the major energy saving strategies, such as install EMS, make a teaching tool for children, sale housing residents is more proactive approach to participant energy saving strategies than public housing residents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.418-418
• /
• 2010

최근 친환경 저전력 차세대 조명소자로 발광다이오드가 각광을 받고 있다. 하지만 종래의 수평형 발광다이오드는 사파이어 기판의 열악한 열전도도 및 전기전도도 특성으로 인하여 효율적인 열방출의 저하가 생기게 되고, 양전극과 음전극의 수평배치에 기인한 심각한 전류쏠림현상 등이 수평형 발광다이오드의 고전력 소자로서의 응용에 걸림돌로 작용하고 있다. 근래에 수평형 발광다이오드의 대안 중 하나로 수직형 발광다이오드에 대한 연구가 활발히 진행되고 있다. 수직형 발광다이오드에서는, 수평형 발광다이오드에서의 전류쏠림현상을 향상시키기 위해 얀전극과 음전극을 수직으로 배치시킨다. 그리고 열전도도 및 전기전도도 특성이 떨어지는 사파이어를 제거하기 위해 LLO(Laser Lift Off)공정이 사용된다. LLO공정으로 인해 수직형 발광다이오드의 구조는 수평형 발광다이오드와 달리 n-GaN이 위로 배치되는 특성을 가진다. 본 연구에서는, 수직형 발광다이오드의 광추출 효율을 증가시키기 위해 SiO2 나노입자를 이용한 GaN 표면요철 형성기술을 개발, 적용 하였다. SiO2 나노입자를 n-GaN상에 단일층으로 분산시키기 위해 PR(PhotoResist), 나노입자, IPA(Isopropyl Alcohol)이 혼합된 용액을 스핀코팅시켰고 그 결과를 SEM으로 확인할 수 있었다. GaN 식각을 위해 SiO2 나노입자를 마스크로 사용하였고, BCl3가스를 사용한 건식식각을 진행하였다. 그 결과 조밀하고 균일한 크기의 Cylinderical Trapezoid 식각 형상이 n-GaN표면에 형성되었음을 SEM으로 확인할 수 있었다. 우리는 표면요철이 없는 발광다이오드와 SiO2 나노입자를 이용한 표면요철이 형성된 발광다이오드의 특성을 비교하였다. 그 결과 표면요철이 있을 때 광출력이 증가함을 확인할 수 있었다. 거기에 더하여 표면요철의 높이가 300nm~1000nm로 변화함에 따른 소자의 특성변화 또한 관찰할 수 있었다.