• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.313-318
• /
• 2014

Recently, Ethernet-based Diagnostic Over Internet Protocol (DoIP) was applied to automotive systems, and in-vehicle gateways have been introduced to integrate Ethernet with traditional in-vehicle networks, such as the local interconnect network (LIN), controller area network (CAN) and FlexRay. The introduction of in-vehicle gateways and of Ethernet based diagnostic protocols not only decreases the complexity of the networks, but also reduces the update time for ECU software reprogramming while enabling the use of a range of services, including remote diagnostics. In this paper, a diagnostic gateway was implement for an automotive system, and the performance measurements are presented. In addition, a range of applications provided by the diagnostic gateway are proposed.

• The Korean Journal of Pain
• /
• v.13 no.1
• /
• pp.8-18
• /
• 2000

Background: Intraperitoneal (IP) and intrathecal (IT) administration of $\alpha$-amino-3-hydroxy-5-methyl-4-isoxazole-propionic (AMPA) and kainate (KA) receptor antagonist attenuate hyperalgesia in various models of persistent pain. The purpose of this study was to assess the effects of IP and IT LY293558, a novel AMPA/KA receptor antagonist on mechanical hyperalgesia after incision. Methods: Sprague-Dawley rats were anesthetized with halothane and underwent plantar incision. Two hours later, responses to mechanical stimuli were assessed using the response frequency to a nonpunctate mechanical stimulus and withdrawal threshold to calibrated von Frey filaments. One group of rats received vehicle, 5 or 10 mg/kg of LY293558 IP. In the other group, vehicle, 0.2, 0.5 or 2 nmol of LY293558 was administered IT. Ataxia and motor function were also evaluated. Results: Hyperalgesia was persistent in both the vehicle and 5 mg/kg group. IP administration of 10 mg/kg of LY293558 increased withdrawal threshold at 30 and 60 min after incision; deficits in rotorod performance were observed at 30, 60, 90 and 150 min. IT administration of 0.5 nmol of LY293558 increased the median withdrawal threshold at 30 and 60 min. Motor function was only impaired at 30 min. IT administration of 2 nmol produced hemiparesis. Again, inhibition of pain behaviors outlasted the effects on motor function. Conclusions: These data further suggest AMPA/KA receptors are important for the maintenance of pain behaviors caused by incisions. IT administration of LY293558 was more effective than systemic administration and reducing pain behaviors caused by a surgical incision.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.103-110
• /
• 2013

WAVE system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. In this paper, we divide module that manages WAVE MAC state into a WSMP base MLME module and IP base module and we design and implement a parameter environment between WME module to manage the state of the WAVE system and MLMEX module to mange IP base of WAVE MAC therefore the date to be processed.Also, in order to verify the validity, we have carried out experiments to compare the speed of data processing by dividing data of 5Mbyte, 10Mbyte, 20Mbyte into the packets of 2KByte and 4KByte. Therefore, in WAVE system, the Parameter environments and data processing speed between WME and MLMEX module can be utilized in the various service of vehicle communication technology depending on the speed of data processing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1153-1164
• /
• 2012

In this paper, we propose an efficient car management system based on object-oriented modeling using car number recognition and smart phone. The proposed system perceives car number of repair vehicle after recognizing the licence plate using an IP camera in real time. And then, existing repair history information of the recognized car is be displayed in DID. In addition, maintenance process is shooting video while auto maintenance mechanic repairs car through IP-camera. That will be provide customer car identification and repairs history management function by sending key frames extracted from recorded video automatically. We provide user graphic interface based on web and mobile for your convenience. The module design of the proposed system apply software design modeling based on granular object-oriented considering reuse and extensibility after implementation. Car repairs center and maintenance companies can improve business efficiency, as well as the requested vehicle repair can increase customer confidence.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.1-11
• /
• 2012

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health care, home automation, environmental monitoring, industrial control, vehicle telematics, and agricultural monitoring. In all these applications, a fundamental issue is the mobility in the sensor network, particularly with regards to energy efficiency. Because of the energy inefficiency of network-based mobility management protocols, they can be supported via IP-WSNs. In this paper, we propose a network-based mobility-supported IP-WSN protocol called mSFP, or the mSFP: "Multicasting-supported Inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks". Based on [8,20], we present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.574-580
• /
• 2016

In this paper, we will introduce the system that can control multiple vehicles on the road through Single Board Computers and V2I (Vehicle-To-Infrastructure). Also, we will propose the group evasive maneuver decision algorithm, which plays a critical role in deciding whether the vehicles in the system have to conduct evasive maneuvers to avoid obstacles on the road. In order to test this system, we have utilized Wi-Fi and TCP/IP for establishing the communication between multiple vehicles and the relay server, and observed their driving states on the road with obstacles. During the experiments, we have discovered that our original decision algorithm possesses high failure rate when there is frequency interference in ISM (Industrial Scientific Medical) band. In order to reduce this failure rate, we have implemented the data transition detector. This paper will focus on how the use of data transition detector can affect the reliability of the system under the frequency interference of ISM band. If this technology is improved and applied in the field, we will effectively deal with such dangerous situations as multiple collision accidents through vehicle-to-vehicle communication or vehicle-to-infrastructure communication. Furthermore, this can be applied to the autonomous driving technologies. This can be used as the reference data for the development of the similar system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.15-26
• /
• 2013

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Because of the energy inefficiency of networks-based mobility management protocols can be supported in IP-WSN. In this paper we propose a network based mobility supported IP-WSN protocol called Multicasting-based inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks (mSFP). Based on [8,20], We present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1183-1190
• /
• 2018

The environmental regulations are being strengthened all over the world, and the introduction of electric vehicles are actively being considered to cope with them effectively. It is essential to establish a charging infrastructure, which is an essential element of electric vehicle distribution. In this paper, power line communication technology essential for smart charging infrastructure is studied. A control board capable of achieving a physical layer speed of 10Mbps and a TCP/IP layer of 4.5Mbps, which conforms to the ISO/IEC 15118 international standard, and a control board mounted on the board and compliant with international standards. We have developed a software solution to perform functions for linking. In addition, in order to be applied to the combo-type DC fast charger, the hardware was designed to meet the industrial environment standard and the V2G communication module was developed by integrating it with the software solution.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.137-145
• /
• 2010

This study presents an RTS(Real-time Traffic System) based on an LBS(Location Based Service) using 5.8~5.9GHz RSU(Road Side Unit). The proposed LBI(Location based Broadcast system on ITS) is a local information-based service supported by RSU for drivers, which has a feature of convergence between T-DMB system and ITS-based RTS. The convergence of local broadcasting station and ITS is realized by two-way communication and supports LBS(Location Based Service) by identifying of vehicle's location using RSU. Real-time information delivery and various services could be provided by information exchanges between LMM and local broadcasting stations. Furthermore, conventional technical limitations have been solved mutually such as transmission area limitation in RTS and one-way communication problem in T-DMB. This support real-time two-way communication to each driver. Therefore, it can be expected that traffic dispersion effects and services expansion for drivers by RTS and LBI. Finally, it is proposed to built and implement test-bed around institute.

• The Journal of the Korea Contents Association
• /
• v.6 no.5
• /
• pp.14-19
• /
• 2006

In this paper, we describe an arrival time guidance system of circular vehicles using GPS, CDMA and TCP/IP technology. The on-board equipment consists of a GPS receiver and a PDA phone. The on-board equipment sends the current position data of the vehicle to the positioning server via CDMA and Internet. The server predicts the arrival time to the next bus-stop. Any user can lookup the current position and the predicted arrival time of the vehicle utilizing his mobile phone, PDA phone, or Web.