• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.121-122
• /
• 2008

Blue emitting materials have been explored by various researchers. However, blue-emitting materials with high luminous efficiency, good color purity, and thermal stability are still much desired. In this study, we synthesized a new blue luminescent material, $SnDP(HPB)_2$ which is low molecular compound and thermal stability. The PL spectrum of $SnDP(HPB)_2$ was observed blue at the wavelength of 447nm. The ionization potential(IP) and the electron affinity(EA) of $SnDP(HPB)_2$ was measured to be 6.7 eV and 3.0 eV, respectively. The fundamental structure of the OLED was ITO/NPB/$SnDP(HPB)_2/Alq_3$/LiF/Al. As a Result, we obtained to enhance the performance of blue OLED.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.552-557
• /
• 1992

Chloramphenicol was studied by differential pulse polarography (DDP). A reduction peak which is dependent on pH of the solution appeared in the voltage range between zero and -1.50 volt vs. Ag/AgCl (sat. KCl) reference electrode. A plot of peak potentials (Ep) measured at room temperature (20$^{\circ}C$) vs. pH of the chloramphenicol solutions showed linear relationship changing slope (Ep/pH) at pH 8.9. The slope was -59.7 mV/pH in pH 2.7∼8.9 and -24.3 mV/pH in pH 8.9∼11.2, respectively. A log plot of peak currents (ip) vs. concentrations showed a linearity at the concentrations between 4.8 ${\times}$ 10$^{-7}$ M and 6.2 ${\times}$ 10$^{-5}$ M (0.16 ppm∼20 ppm) chloramphenicol in pH 8.0 ammonium buffer. Between the DPP method and the reference method measuring absorbance at 278 nm, the correlation coefficient was 0.996, which means an excellent linearity. The DPP method was able to detect degradation products of chloramphenicol in mild alkaline solution (pH = 8.0) more distinctly than the spectrophotometric method.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.604-610
• /
• 2008

A 2.4 GHz CMOS RF front-end using for ZigBee application is described The front-end consists of a low noise amplifier and a down-mixer and uses a 2 MHz IF frequency. A common source with resistive feedback and an inductive degeneration are adopted for a low noise amplifier, and a 20 dB gain control step is digitally controlled. A passive mixer for low current consumption is employed. The RF front-end is implemented in 0.18 ${\mu}m$IP6M CMOS process. The measured performance is 4.44 dB NF and -6.5 dBm IIP3 while consuming 3.28 mA current from a 1.8 V supply.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.321-328
• /
• 2008

In this paper, variable gain amplifier(VGA) with a gain slope controller has been proposed and verified by circuit simulations and measurements. The proposed VGA has a gain control, gain slope switch and variable gain range. The input source coupled pair with diode connected load is used for VGA gain stage. The gain slope controller with switch can control VGA gain slope. The proposed VGA is fabricated in $0.18{\mu}m$ CMOS process for multi -standard wireless receiver. The proposed two stage VGA consumes min. 2.0 mW to max. 2.6 mW in gain control range and gives input IP3 of -3.77 dBm and NF of 28.7 dB at 1.8 V power supply under -25 dBm, 1 MHz input. The proposed VGA has 37 dB(-16 dB $\sim$ 21 dB) variable gain range, and 8 dB gain range control per 0.3 V control voltage, and can provide variable gain, positive and negative gain slope control, and gain range control. This VGA characteristics provide design flexibility in multi-standard wireless receiver.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1112-1114
• /
• 2005

Core position of the M2M (Machine to Machine) is device integration fusion using an emerging wireless and next internet technologies as well as IEEE 802.x, Bluetooth, Zigbee, DMB, Wibro etc. for ubiquitous environment that is complementary with IT839 strategy from Ministry of Information & Communication. This paper define and deploy about major functional requirements of M2M devices and middleware for how to it works, worldwide M2M technology trend & activities with its current & future application in manufacturing area that is called u-Manufacturing (Ubiquitous Manufacturing).

• Korean Journal of Animal Reproduction
• /
• v.21 no.3
• /
• pp.303-310
• /
• 1997

소 난포란의 체외성숙시 성숙배지에 FSH 및 LH의 첨가가 체외성숙난자의 calcium 반응과 체외수정란의 발달에 미치는 영향을 조사하였다. 난포란의 체외성숙은 TCM199을 기초로 한 4가지의 배양조건 하에서 : 1) 0.5$\mu\textrm{g}$/ml FSH＋5$\mu\textrm{g}$/ml LH, 2) 0.5$\mu\textrm{g}$/ml FSH, 3) 5$\mu\textrm{g}$/ml LH 및 4) 무 호르몬 첨가구로서 5% CO2에 24시간 동안 체외성숙을 유도하였다. 체외성숙 24기간째에 난포란의 과립막세포는 1ml PB1＋에서 4분 동안 vortexing을 하여 완전히 제거하였다. 세포 내 calcium 반응을 측정하기 위하여 2mM Fura-2 AM ester 및 0.02% Pluronic F-127가 첨가된 PB1-용액에 39$^{\circ}C$ in cubator에서 40분 동안 배양하였다. 30${\mu}\ell$ M2 medium drop을 30mm plastic dish에 만들어 20$\times$ 형광대물렌즈가 장착된 Nikon Diaphot 현미경의 장착된 Nikon Diaphot 현미경의 warm stage에 설치하였다. 세포 내 calcium 방출을 자극하기 위하여 난자에 25mM inositol 1, 4, 5-trasphophate(IP3)로 1.21kV/cm의 전기자극 또는 20mM ryanodine으로 미세주입을 실시하였다. 이러한 처리를 하지 않은 난자는 체외수정 후 CR1aa와 BRL monolayers의 공배양조건 하에서 체외발달을 유도하였다. 분할율(Day 2)과 배반포기발달율(Day 9)을 조사하였다. FSH와 LH의 처리구에서 IP3 또는 ryanodine으로 자극된 난자(1.79$\pm$0.05, 1.66$\pm$0.06)는 FSH, LH 및 무 호르몬처리구에 비하여 유의적으로 높은 calcium 반응을 보였다(1.00$\pm$0.03, 1.28$\pm$0.04, and 0.53$\pm$0.02 in IP3 elctroporation; 0.68$\pm$0.05, 1.03$\pm$0.05, and 0.47$\pm$0.04 in ryanodine microinjection). FSH와 LH, FSH, LH처리구에서 분할율(87.9, 71.5 및 75.6%)은 무 호르몬처리구(60.7%)(P<0.05)에 비하여 유의적으로 높았으며, FSH와 LH처리구(29.3%)에서의 배반포기 발달율은 FSH, LH 처리구뿐만 아니라 무 호르몬처리구보다 유의적으로 높았다(16.5, 19.0 and 9.8%)(P<0.05). Bovine FSH 및 Ovine FSH의 처리구에서의 calcium 반응은 유의적인 차이가 없었다(1.72$\pm$0.05, 1.61$\pm$0.06). 또한 분할율(82.2 and 84.0%) 및 배반포기(27.8 and 27.1%) 발달율도 bovine 및 ovine FSH처리구간에는 유의적인 차이가 없었다. 이상의 결과에서 전기자극에 의한 세포 내 calcium 반응은 체외성숙배지에 첨가하는 호르몬의 처리에 따라서 유의적인 변화를 보였다. 비록 분할율은 처리구간에 유의적인 차이가 없었지만 배반포기 발달율은 FSH와 LH 공동처리구에서 FSH, LH 단독처리구 및 무 호르몬처리구에 비하여 유의적으로 높은 발달율을 보였다. 체외성숙기간에 FSH와 LH의 공동첨가는 체외성숙 및 체외발달의 생리적인 교정을 위하여 요구되는 것으로 사려된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.93-98
• /
• 2004

Serial ATA interface Is inexpensive comparatively and performance is superior. So it is suitable technology in demand that now require data transmission and throughput of high speed. This paper describes a design and implementation of Serial ATA Link layer about error detection and 8b/10b encoder/decoder for DC balance in frequency 150MHz. The 8b/10b Encoder is partitioned into a 5b/6b plus a 3b/4b coder. The logical model of the block is described by using Verilog HDL at register transistor level and the verified HDL is synthesized using standard cell libraries. And it is fabricated with $0.35{\mu}m$ Standard CMOS Cell library and the chip size is about $1500{\mu}m\;*\;1500{\mu}m$. The function of this chip has been verified and tested using testboard with FPGA equipment and IDEC ATS2 test equipment. It is used to frequency of 100MHz in verification processes and supply voltage 3.3V. The result of testing is well on the system clock 100MHz. The designed and verified each blocks may be used IP in the field of high speed serial data communication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.113-125
• /
• 2019

This research aims to understand the common psychological features of consumer. And master the direction of the development of the network novels derivation by analysis the TV plays adapted from network novels in China's IP industry. To this end, This research determine to analyzed consumer adoption attitude the Behavior Intention of derivative products. The date were collected from 612 Chinese people, from October 15 to October 22 2018. Statistical analysis were through SPSS 21 after data coding and data cleanings process. This research performed frequency analysis exploratory factor analysis, Independent sample t-test, one-way ANOVA, post-analysis Duncan test, correlation analysis and mass regression analysis. The research results are as follows. Firstly, the characteristics(topicality, empathy and interest) of network novel TV play positively related role in the adoption attitudes(cognitive attitude and emotional attitude) of derivatives commodities. At the same time, identity has a more positively related influence than topicality and interest. Secondly, all the characteristics of network novels consisting of topicality, identity and interest play positive related roles in the behavioral intentions of derivative commodities. Thirdly, emotional attitude plays a more positively related role in purchasing intention and recommendation intention compared with cognitive attitude. It is hoped that the research results can play a fundamental role in the production and development of network novels derivatives.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.72-79
• /
• 1997

A study is a experiment which is figure out to optimum discharge cutting condition of the surface roughness, electronic discharging speed and electrode wear ration with Ton , Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.