• 산업경영시스템학회지
• /
• 제10권15호
• /
• pp.33-38
• /
• 1987

In establishing Multi-Stage Machining process inspection procedures, however, where costs of inspection md defective products are often directly measurable, a better method for formulating inspection plans is available. If one of the primary interest of a manufacturing concern is to maximize profits, then optimal inspection plans ought to be selected so as to minimize costs. This paper is aimed to find a methodology of optimal inspection planning in Multi-stage Machining process and to develope a proper algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.106-106
• /
• 2000

This study is to embody automatic inspection system of motor body panel by visual system. since it is inefficient to examine the adhesion condition of components with the naked eye, picture processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process. The developed automatic inspection system presents the examination method of the adhesion condition of components with a ixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.288-288
• /
• 2000

Reactor vessel is one of the most important equipment with regard to the safety of nuclear power plant. Thus nuclear regulation requires its periodical examination by certified inspection experts. Conventional reactor inspection machines are obsolete, hard to handle, and very expensive. To solve these problems we developed robotic reactor vessel inspection system which are small, easy to use for inspection, cost effective, and convenient in operation. This paper describes the main features of Main Control System which is one part of robotic inspection equipment we developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2049-2051
• /
• 2002

X-ray inspection of tires is now feasible and commercially available. The enabling technologies are economical yet powerful computing systems and high-resolution, high-dynamic range X-ray imaging systems customized for tire inspection. The key advantages of reduced inspection labor, highly consistent inspection and yield improvement are now realizable.

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.1-6
• /
• 2014

Visual defect inspection for electronics parts manufacturing processes is comprised of 2 steps - automatic visual inspection by machine and inspection by human inspectors. It is necessary that spatial points which were detected by the machine should be adequately clustered for subsequent human inspection. This research deals with the spatial clustering algorithm for the purpose of process productivity improvement. Distribution based clustering is newly developed and experimentally confirmed to show better clustering efficiency than existing algorithm - area based clustering.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.196-209
• /
• 2000

In order to intensify an enterprise competition, quality inspection controls are very important issue. An organization or division of a company hopes which to acquire the quality inspection information be updated in real-time with respect to shop floor. In this paper, we develop a quality inspection control system for a Turbine/Generator production industry. The system compromises inspection scheduling module related to shop floor control (SFC) system, formal documentation control module, and formal inspection control module. In the quality inspection control system, ORACLE RDBMS is used for the database management system and ORACLE DEVELOPER 2000 is used for system development tool. The characteristic of this system is to support so it can enhance productivity and quality through inspection plans related to production scheduling.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.206-213
• /
• 2011

Line sleeves, which used to connect ACSR cables when transmission lines were constructing, sometimes cause power transmission failure due to deterioration and corrosion. Therefore, power transmission line should be inspected regularly to prevent national disaster. Current inspection tool detects insertion length of transmission line on line sleeves, the inspection tool includes enormous error by operator. Moreover, the system is not controlled remotely, negligent accident would be caused while inspecting. To deal with those problems, KEPCO reviewed several ways to inspect line sleeves and proposes new method to inspect line sleeve by measuring magnetic flex which penetrate junction of steel and aluminum sleeve. The developed inspection tool is reliable enough to detect eccentric sleeves. Also, the developed inspection device was applied on actual transmission line and verified its effectiveness.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.418-421
• /
• 2007

For Shock obsorber piston led is launched to the market through luring, milling, grooving, rolling, inspection and finally packing processes, To this time around 11 items, that is, out diameter and length etc..for the piston lod are inspected strictly as a total inspection. Piston Lod is being produced 30,000 a day and its excessively repeating inspection is getting induce repetition strain injury and reduce production rate as fatigue accumulation of worker increase inspection errors. Therefore, for the inspection process is severely needed a progressive improvement through the automation. In this study, we consider automation method of piston led inspection process and suggest an efficient automation strategy as improving the various problems in present manual inspection way.

• 품질경영학회지
• /
• 제24권1호
• /
• pp.20-31
• /
• 1996

A pure zero-one integer program is formulated for determining where to assign the inspection stations in a multi-stage production system. The objective fuction is formulated to minimize the overall inspection costs. One of the major characteristics of this system is that an assigned inspection station is to inspect only the items produced in previous manufacturing stages. Each inspection station can be assigned to any possible inspection stage between two manufacturing stages. Error-free and screening inspection policy is assumed in this system and the defective items found in any inspection station will be reworked at once. The integer programming model presented in this paper has the advantages in the ease of modeling and modifiing as compared with the existing dymanamic programming methods. The solutions of the model can be easily obtained by the commercially available softwares like LINDO and GAMS.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1276-1283
• /
• 2004

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause following the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.