• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.55-66
• /
• 2001

The Global Positioning System(GPS) and the Strapdown Inertial Navigation System(SDINS) techniques have been widely utilized in many applications. However each system has its own weak point when used in a stand-alone mode. SDINS suffers from fast error accumulation dependent on an operating time while GPS has problem of cycle slips and just provides low update rate. The best solution is to integrate the GPS and SDINS system and its integration allows compensation for each shortcomings. This paper, first, is to define and derive error equations of integrated SDINS/GPS system before it will be applied on a real hardware system with gyro, accelerometer and GPS receiver. Second, the accuracy, availability and performance of this mechanization are verified on the simulation study.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.263-268
• /
• 2004

GPS/INS에 의한 항공사진측량을 이용하려면 사진촬영과 동시에 획득한 외부표정요소의 결과를 도화ㆍ편집 작업에 실제로 적용해 보아야 한다. 도화성과의 검증작업은 GPS/INS의 결과를 이용하여 수치지도의 제작시 가장 중요한 공정에 해당한다. 이를 위하여 기존 AT성과에 의하여 제작된 해석도화원도를 기준으로 본 연구에서 제시한 AT 성과별, 도화기별, 표정방식별로 수행한 도화결과를 비교하였다. AT 성과와 표정방법에 상관없이 해석도화와 수치도화의 평면과 표고의 오차를 비교하여 보면, 해석도화가 수치도화보다 우수한 결과를 보여주며, 또한 평면오차가 표고오차보다 더 크게 나타남을 알 수 있었다. GPS/INS AT의 Direct 표정의 경우 InDirect 표정방법에 비해 3배 이상의 오차가 발생하였으나 모든 경우의 결과가 허용오차를 충족하고 있으므로 축척 1:5000에서는 GPS/INS AT를 이용한 표정과 도화작업은 매우 효율적으로 수행될 수 있음을 알 수 있었다.

• ETRI Journal
• /
• 제28권3호
• /
• pp.265-274
• /
• 2006

Recent advances in positioning and photogrammetry technologies have made it possible to build a mobile mapping system (MMS) that can obtain 3D coordinates of geographic objects from stereo images recorded from a moving vehicle. In this paper, we present a design and detailed implementation of an MMS called a 4S-Van. Furthermore, we present four issues that have made major contributions to the performance of an MMS: 1) CCD camera calibration, 2) GPS signal condition, 3) integrating a GPS, inertial navigation system (INS), distance measurement indicator (DMI), and CCD cameras, and 4) the orientation angle of CCD cameras. In the experimental results, the performance of an MMS was analyzed for each component, giving an idea of how to effectively design and integrate each component in developing an MMS to get a maximal accuracy of 3D coordinates.

• 설비공학논문집
• /
• 제21권2호
• /
• pp.126-130
• /
• 2009

The present study describes an investigation into the characteristics of combustion oscillation and its suppression instability of a silo type gas turbine combustor in commercial power plant. Combustion oscillation is occurred the combustor in near full load during operation. As a result of FFT analysis of the combustion dynamics, the frequency of the oscillation is analyzed as the 1'st longitudinal mode of acoustic resonance of the combustor. For suppress of the instability, combustion tuning with adjust of fuel valve schedule is carried out, which changes equivalent ratio of each burners. As the result, the oscillation is successfully reduced with meeting the level of NOx emission regulation.

• 대한인간공학회지
• /
• 제6권1호
• /
• pp.9-24
• /
• 1987

The design and philosophy are presented for an intelligent aid for a hyman operator who must diagnose a novel fault in a physical system. A novel fault is defined as one that the operator has not experienced in either real system operation or training. When the operator must diagnose a novel fault, deep reasoning about the behavior of the system components is required. To aid the human operator in this situation, four aiding approaches which provide useful information are proposed. The aiding information is generated by a qualitative, component-level model of the physical system. Both the aid and the human are able to reason causally about the system in a cooperative search for a diagnosis. The aiding features were designed to help the hyman's use of his/her mental model in predicting the normal system behavior, integrating the observations into the actual system behavior, or finding discrepancies between the two. The aid can also have direct access to the operator's hypotheses and run a hypothetical system model. The different aiding approaches will be evaluated by a series of experiments.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.145-150
• /
• 2006

The paper deals with integrated navigation and sense & avoid systems for small unmanned aerial vehicles (UAV). First an introduction to the current UAV activities of the institute is given. It is followed by an overview about the integrated navigation system developed for small UAVs. The system is based on a tightly-coupled GPS/INS architecture. But instead of using delta-ranges, time-differenced carrier phases are used to aid the INS. Finally, results from navigation filter validation in flight tests are presented. After that an overview about sense and avoid strategies for application in small unmanned aircraft is given. From this a guideline for developing such a system for the institute's UAVs is presented.

• 공업화학
• /
• 제7권5호
• /
• pp.843-848
• /
• 1996

현탁중합에 의하여 다공성 스티렌-디비닐벤젠 공중합 수지입자를 제조하였으며, 그 수지입자는 가교제인 디비닐벤젠과 세공형성제인 톨루엔 농도가 각각 30wt% 이상일 때만 다공성을 나타내었다. 다공성 수지입자의 비표면적은 디비닐벤젠과 톨루엔의 농도에 따라 증가하였으며, 진한 황산으로 황산화시켰을 때 비표면적은 감소하였다. 에틸아세테이트와 1-프로판올의 에스테르화 반응에서 황산화된 수지촉매의 활성은 가교도에 따라 증가하였다. 수용액 중 sodium dodecylbenzene sulfonate의 흡착에서 다공성 수지입자의 표면적에 따라 흡착량이 증가하였다.

• Journal of Genetic Medicine
• /
• 제14권2호
• /
• pp.62-66
• /
• 2017

Interchromosomal insertion of Y chromosome heterochromatin in an autosome was identified in a fetus and a family. A fetal karyotype was analyzed as 46,XX,dup(7)(?q22q21.1) in a referred amniocentesis at 16 weeks of gestation for advanced maternal age. In the familial karyotype analyses for identification of der(7), the mother, the first daughter and the maternal grandmother showed the same der(7) as the fetus's. CBG-banding was positive at 7q22 region of der(7) that indicated inserted material was originated from heterochromatin. The origin of heterochromatic insertion region in der(7) of the fetus and the mother was found in Yq12 region by fluorescent in situ hybridization with a DYZ1 probe. In the specific analysis of Y chromosomal heterochromatic region of ins(7;Y) of the mother, 15 sequence tagged sites from Yp11.3 region including SRY to Yq11.223 region was not detected. Final karyotypes of the mother, the first daughter and the maternal grandmother were reported as 46,XX,der(7)ins(7;Y)(q21.3;q12q12). All female carriers of ins(7;Y) in the family showed normal phenotype and the mother and the maternal grandmother were fertile. A healthy girl was born at term. We report a rare case of familial interchromosomal insertion of Y chromosome heterochromatin detected only in female family members with normal phenotype that was diagnosed prenatally.

• 대한원격탐사학회지
• /
• 제37권5_1호
• /
• pp.1163-1175
• /
• 2021

자율 주행에서 도로 표시는 객체 추적, 경로 계획을 위한 필수 요소이며 측위를 위한 중요한 정보를 제공할 수 있다. 이 논문은 역 관점 매핑 이미지와 정밀도로지도 투영 이미지를 매칭하여 비교함으로써 도로 노면 표지의 갱신 및 위치 측위를 하는 접근 방식을 제시한다. 역 관점 매핑(IPM; Inverse Perspective Mapping) 기법을 사용하여 차량의 전방을 촬영한 카메라 이미지에서 원근 효과를 제거하고 2D 도메인으로 버드뷰 이미지를 생성한다. 그 다음에 GNSS/INS를 참조하여 촬영된 이미지와 동일한 정밀도로지도 영역을 이미지로 생성하여 두 이미지의 노면표지가 최대한 일치하도록 피팅 한다. 또한 정지선, 횡단 보도, 점선 및 직선 등 문자와 화살표를 인식하여 정밀도로지도의 객체와 비교 함으로써 갱신 여부를 판단 한다. 그리고 새로 설치된 객체의 측위는 주변의 객체의 위치 좌표값을 정밀도로지도에서 참조하여 얻을 수 있다. 우리는 매우 낮은 계산 비용과 저가의 카메라 및 GNSS/INS 센서 만으로도 빠르게 갱신된 정밀도로지도를 얻을 수 있다.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.51-57
• /
• 2012

In this paper, design of an error model is presented in which the bias characteristic of the MEMS IMU is taken into consideration for performance enhancement of the MEMS IMU-based GPS/INS integrated navigation system. The drift bias of the MEMS IMU is modeled as a 1st-order Gauss-Markov (GM) process, and the autocorrelation function is obtained from the collected IMU data, and the correlation time is estimated from this. Prior to obtaining the autocorrelation function, the noise of IMU data is eliminated based on wavelet. As a result of simulation, it is represented that the parameters of error model can be estimated correctly only when a proper denoising is performed according to dynamic behavior of drift bias, and that the integrated navigation system based on error model, in which the drift bias is considered, provides more correct navigation performance compared to the integrated navigation system based on error model in which the drift bias is not considered.