• Journal of Positioning, Navigation, and Timing
• /
• 제4권3호
• /
• pp.141-150
• /
• 2015

In this study, a Global Navigation Satellite System (GNSS) / Inertial Navigation System (INS) / odometer / barometer integrated navigation system that uses a commercial navigation device including Micro Electro Mechanical Systems (MEMS) accelerometer and gyroscope in addition to GNSS, odometer information obtained from a vehicle, and a separate MEMS barometer sensor was implemented, and the performance was verified. In the case of GNSS and GNSS/INS integrated navigation system that are generally used in a navigation device, the performance would deteriorate in areas where GNSS signals are not available. Therefore, an integrated navigation system that calculates a better navigation solution in areas where GNSS signals are not available compared to general GNSS/INS by correcting the velocity error of GNSS/INS using an odometer and by correcting the cumulative altitude error of GNSS/INS using a barometer was suggested. To verify the performance of the navigation system, a commercial navigation device (Softman, Hyundai Mnsoft, http://www.hyundai-mnsoft.com) and a barometer sensor (ST Company) were installed at a vehicle, and an actual driving test was performed. To examine the performance of the algorithm, the navigation solutions of general GNSS/INS and the GNSS/INS/odometer/barometer integrated navigation system were compared in an area where GNSS signals are not available. As a result, a navigation solution that has a smaller position error than that of GNSS/INS could be obtained in the area where GNSS signals are not available.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.982-988
• /
• 2006

The errors of INS (Inertial Navigation System) are known to grow in time. To compensate the accumulated errors, measurements of external or onboard sensors are extensively utilized to form an integrated navigation system. Recently, INS/GPS integrated navigation systems have become popular since exact position and velocity information can be utilized by low cost GPS receivers. Unfortunately, this configuration cannot be trusted at all times especially when there are intentional or unexpected jammings and interruptions. To aid INS irrespectively of these cases, an INS/Image sensor integrated navigation system configuration is designed only based on the information of image sensor gimble angles. The performance of the INS/Image sensor integrated navigation system is evaluated by Monte Carlo simulation.

• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.423-429
• /
• 2008

This study was performed to investigate the effects of inertial navigation system (INS) / global positioning system (GPS) sensor fusion for agricultural vehicle navigation. An extended Kalman filter algorithm was adopted for INS/GPS sensor fusion in an integrated mode, and the vehicle dynamic model was used instead of the navigation state error model. The INS/GPS system was consisted of a low-cost gyroscope, an odometer and a GPS receiver, and its performance was tested through computer simulations. When measurement noises of GPS receiver were 10, 1.0, 0.5, and 0.2 m ($1{\sigma}$), RMS position and heading errors of INS/GPS system at 5 m/s straight path were remarkably reduced with 10%, 35%, 40%, and 60% of those obtained from the GPS receiver, respectively. The decrease of position and heading errors by using INS/GPS rather than stand-alone GPS can provide more stable steering of agricultural equipments. Therefore, the low-cost INS/GPS system using the extended Kalman filter algorithm may enable the self-autonomous navigation to meet required performance like stable steering or more less position errors even in slow-speed operation.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권1호
• /
• pp.93-102
• /
• 2024

Global Navigation Satellite System (GNSS)/Inertial Navigation System (INS) integrated navigation systems provide highly accurate and reliable navigation solutions and are widely used as civil and military navigation systems. In order to facilitate the GNSS/INS integrated navigation system development task, a simulator can be used to provide inputs for the GNSS/INS integrated navigation system. In this paper, a simulator design using general-purpose Personal Computer (PC) and Off-The-Shelf (OTS) interface boards for a GNSS/INS integrated navigation system is proposed and implementation results are presented. Requirements of the GNSS/INS integrated navigation system simulator are presented and a design method that satisfies the requirements is described. In order to show the usefulness of the proposed design method, a simulator using a general-purpose PC and OTS interface boards for the GPS/INS integrated navigation system are implemented and verified. The implementation results show that the simulator designed by the proposed method generates the GPS L1 C/A signal and IMU data without any problems.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.186-196
• /
• 1999

The CPS provides data with long-term stability independent of passed time and the INS provides high-rate data with short-term stability. By integrating these complementary systems, a highly accurate navigation system can be achieved. In this paper, a loosely-coupled GPS/INS integration system is designed. It is a simple structure and is easy to implement and preserves independent navigation capability of GPS and INS. The integration system consists of a NCU, an IMU, a GPS receiver, and a monitoring system. The navigation algorithm in the NCU is designed under the multi-tasking environment based on a real-time kernel system and the monitoring system is designed using the Visual C++. The integrated Kalman filter is designed as a feedback formed 15-state filter, in which the states are position errors, velocity errors, attitude errors and sensor bias errors. The van test result shows that the integrated system provides more accurate navigation solution then the inertial or the GPS-alone navigation system.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.688-693
• /
• 2007

The INS/GPS integration system is designed by employing an adaptive filter that can estimate the measurement noise variance using the residual of the filter. To verify the efficiency of the proposed loosely-coupled INS/GPS integration system, simulation is performed by assuming that GPS information has large position errors. Simulation results show that the proposed integration system with the adaptive filter is more effective in estimating the position and attitude errors than those with the Extended Kalman Filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.984-989
• /
• 2003

The integrated global position system (GPS) and inertial navigation system (INS) has been considered as a cost-effective way of providing an accurate and reliable navigation system for civil and military system. Even the integration of a navigation sensor as a supporting device requires the development of non-traditional approaches and algorithms. The objective of this paper is to assess the feasibility of integrated with GPS and INS information, to provide the navigation capability for long term accuracy of the integrated system. Advanced algorithms are used to integrate the GPS and INS sensor data. That is fuzzy inference system based Weighted Extended Kalman Filter(FWEKF) algorithm INS signal corrections to provided an accurate navigation system of the integrated GPS and INS. Repeatedly, these include INS error, calculated platform corrections using GPS outputs, velocity corrections, position correction and error model estimation for prediction. Therefore, the paper introduces the newly developed technology which is aimed at achieving high accuracy results with integrated system. Finally, in this paper are given the results of simulation tests of the integrated system and the results show very good performance

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.974-977
• /
• 2003

The GPS/INS integration system navigation can provide improved navigation performance and has been widely used as a main navigation system for military and commercial vehicles. When two navigation systems are tightly coupled and the structure is complicated, a fault in either the GPS or the INS can lead to a disastrous failure of the whole integration system. This paper proposes a real-time fault detection method for an AGPS/INS integration system. The proposed fault detection method comprises a BIT and a fault detection algorithm based on chi-square test. It is implemented by real-time software modules to apply the AGPS/INS integration system and van test is carried out to evaluate its performance.

• 한국측량학회지
• /
• 제28권5호
• /
• pp.531-537
• /
• 2010

실시간 공중자료획득 시스템은 긴급상황에서 실시간으로 공간정보를 생성하기 위해 빠른 매핑을 수행하는 시스템이다. 이 시스템은 GPS/INS 통합 알고리즘에서 제공한 위치 및 자세를 사용하여 무기준점 방식의 AT(aerial truangulation)을 수행한다. 따라서 순차적으로 AT을 통한 조정된 위치 및 자세를 얻을 수 있다면, 이를 칼만필터의 측정치로 하여 위치 및 자세를 보정할 수 있다. 이에 본 연구는 무인항공기 기반의 항공시스템을 기준으로 GPS/IMS Image 시뮬레이션 데이터를 생성하였다. 생성된 시뮬레이션 데이터를 이용하여 GPS/INS 통합 알고리즘을 통한 AT 수행결과와 AT을 통해 조정된 위치 및 자세를 이용하여 GPS/INS 위치 및 자세를 보정하는 GPS/INS/AT 통합 알고리즘에 의해 계산된 AT의 결과를 산출하여 비교하였다. 비교분석 결과, GPS/INS/AT 통합 알고리즘으로 AT를 수행한 결과가 GPS/INS를 이용한 AT를 수행한 결과보다 정확성이 높은 것을 확인하였다. 그러나 항체가 회전을 할 경우에는 위치 오차가 GPS/INS로 부터의 위치오차보다 높게 나오는 경향을 보였으며, 추후 분석이 필요할 것이라고 사료된다.

• 한국항공운항학회지
• /
• 제10권1호
• /
• pp.35-44
• /
• 2002

Inertial Navigation System(INS) has been used in the field of air navigation for a long time but is not popular in general aviation due to high price. Recently low-price GPS is available but vulnerable to radio interference. As an alternative on these problems, GPS/INS integrated navigation system has been considered. GPS/INS is capable of implementing navigation with low-price inertial sensors but its accuracy is dependent upon how much drift of INS may be calibrated by using GPS. In order to apply GPS/INS to air navigation, it must be investigated how long drift of INS in case of no GPS aiding will be bounded within requirements for safe flight. From the above motivation, the flight test for GPS/INS navigation system was conducted in order to make sense its performance in air navigation and its result was shown.