• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.337-340
• /
• 2001

In this paper, we propose two types of dual-mode voltage controlled oscillators (VCO) for PCS/IMT-2000 applications. One is a VCO with controllable resonant circuit. The other type is a VCO with single output and two independent parts

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.230-233
• /
• 2000

A parallel concatenated convolutional coding scheme consists of two constituent systematic convolutional encoders linked by an interleaver. The information bits at the input of the first encoder are scrambled by the interleaver before entering the second encoder.〔1〕-〔3〕Now many different interleavers are presented for Turbo code. The topic of this paper is to design of the interleaver which is for IS-2000 Turbo code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.902-911
• /
• 2003

Using InGaP/GaAs HBT power cells with a 2.0${\times}$20$\mu\textrm{m}$$^2$ emitter area of a unit HBT, a two stage MMIC power amplifier has been developed for IMT-2000 handsets. An active-bias circuit has been used for temperature compensation and reduction in the idling current. Fitting on measured S-parameters of the HBT cells, circuit elements of HBT's nonlinear equivalent model have been extracted. The matching circuits have been designed basically with the extracted model. A two stage HBT MMIC power amplifier fabricated using ETRI's HBT process. The power amplifier produces an 1-㏈ compressed output power(P$\_$l-㏈/) of 28.4 ㏈m with 31% power added efficiency(PAE) and 23-㏈ power gain at 1.95 GHz in on-wafer measurement. Also, the power amplifier produces a 26 ㏈m output power, 28% PAE and a 22.3-㏈ power gain with a -40 ㏈c ACPR at a 3.84 ㎒ off-center frequency in COB measurement.quency in COB measurement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.547-552
• /
• 2002

In this paper, the path loss in domestic terrain environments for IMT-2000 are measured and considered. Domestic terrain environments are classified and received power is measured at 1.9201GHz. In addition, the Path loss is calculated with consideration of the radiation pattern of antennas based on the results of measurement. For the consideration of path loss in domestic terrain environments, each path loss are fitted with the same slope of a reference model as "COST-231 HATA Urban Model", and then both are compared. As a result, all of the path loss in domestic terrain environments are lower than the path loss of a reference model as "COST-231 HATA Urban Model". We found that a difference of path loss in domestic terrain environments and a reference model is 5dB in urban, 8dB in sparse urban, 12dll in dense suburban, 13dB in suburban, 19dB in sparse suburban, and 29dB in road.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.232-237
• /
• 2020

In this paper, a compact microstrip-fed dual-band planar antenna for global positioning system (GPS) and mobile handset applications is presented. Dual operating frequency bands are achieved by an open end L-shaped slot and a bent rectangular slot. The proposed antenna is designed and fabricated on the FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm and size of 57 × 57 ㎟. The measured impedance bandwidth (|S₁₁|≤ -10dB) of the fabricated antenna is 60 MHz(1550 ~ 1610 MHz) in the GPS band and 670 MHz (1690 ~ 2360 MHz) in the DCS / IMT-2000 band, covering the required bandwidths for GPS(1570 ~ 1580 MHz) and DCS / IMT-2000 (1710 ~ 2200 MHz) bands. In particular, it has been observed that antenna has a good omnidirectional radiation patterns as well as high gain of 2.36 dBi and its efficiency is more than 90 % over the entire frequency band of interest.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.762-768
• /
• 2003

This paper reports the effects of gain flatness for linearity improvement of feedforward power amplifier fur IMT-2000 band. To investigate the operational characteristics for gain flatness of each amplifier, WCDMA 4FA input signal was used and measured 10 W output power. Especially, linearity improvement for variation of gain flatness of each amplifier was investigated that have an effect on linearity improvement such as delay line, phase, and amplitude imbalances. Variation of gain flatness of main amplifier is 40 MHz and of error amplifier is 40 MHz and 80 MHz bandwidth, respectively. Measured results, gain flatness of main amplifier is less than 1.5 dB and of error amplifier is less than 0.5 dB for more than 20 dB improvement at 5 MHz offset. In addition to that results, the characteristics of feedforward amplifier are drastically varied by gain flatness of error amplifier and it is shown that gain flatness of error amplifier is more important factor for linearity improvement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.41-51
• /
• 2004

In this paper, the beam steering dipole phased array antenna systems for IMT-2000 base station have been designed. The designed beam steering dipole phased array antenna systems are constituted by the antenna part and the beam steering control system part. The antenna part is designed by the proposed flat dipole for the broadband characteristics, and the 8${\times}$8 dipole array antenna is constructed by the proposed flat dipole for the directional radiation pattern. Besides the vertical power divider is designed for the vertical power distribution. The beam steering control system part is designed the horizontal power divider for the horizontal power distribution, the 4-bit phase shifters and the driving circuit of phase shifters for the horizontal beam tilting. In order to evaluate a performance of the designed antenna systems, they were fabricated and the radiation characteristics were measured. From the measured results, we found that the horizontal beams were tilted by the each control signals, and the measured radiation characteristics showed good agreement with the design goals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.11-19
• /
• 2002

This paper gives an optimal step size of E$\sub$b/ /I$\sub$oT/ for outer-loop power control(OLPC) in IMT-2000 system. The performance of outer-loop Power control is affected greatly by the fixed step size according to the channel environments. Conventional methods are inaccurate because they are decided by expert's experiences and the performance is not proved theoretically. In this paper, we show that IMT-2000 system maintains optimal capacity and QoS by the step size of E$\sub$b/ /I$\sub$oT/ obtained from the discrete-time Markov chain model.

• TTA Journal
• /
• s.107
• /
• pp.126-129
• /
• 2006

• Information and Communications Magazine
• /
• v.25 no.4
• /
• pp.62-66
• /
• 2008

지난 2007년 진행되었던 와이브로 기술의 IMT-2000 표준화 과정을 되짚어 봄으로써 와이브로 기술에 제기된 의문점들이 무엇 인지와 이를 어떻게 극복했는지를 살펴보고, 이를 통해 앞으로 예상되는 IMT-Advanced 등의 국제 표준화 과정에서 준비해야 할 일들에서 고찰해보고자 한다.