Abstract
This paper reports the effects of gain flatness for linearity improvement of feedforward power amplifier fur IMT-2000 band. To investigate the operational characteristics for gain flatness of each amplifier, WCDMA 4FA input signal was used and measured 10 W output power. Especially, linearity improvement for variation of gain flatness of each amplifier was investigated that have an effect on linearity improvement such as delay line, phase, and amplitude imbalances. Variation of gain flatness of main amplifier is 40 MHz and of error amplifier is 40 MHz and 80 MHz bandwidth, respectively. Measured results, gain flatness of main amplifier is less than 1.5 dB and of error amplifier is less than 0.5 dB for more than 20 dB improvement at 5 MHz offset. In addition to that results, the characteristics of feedforward amplifier are drastically varied by gain flatness of error amplifier and it is shown that gain flatness of error amplifier is more important factor for linearity improvement.
본 논문은 IMT-2000 대역에서 동작하는 피드포워드 증폭기의 선형성 개선을 위한 이득 평탄도의 영향에 관한 것이다. 각 증폭기의 이득 평탄도에 대한 동작 특성을 조사하기 위하여 WCDMA 4FA 신호를 인가하여 최종 출력 10 W에서 측정하였다. 특히, 지연 선로, 위상, 크기의 부정합과 같이 선형성 개선에 영향을 미치는 요인 중 각 증폭기의 이득 평탄도의 변화에 따르는 선형성의 개선에 대하여 조사하였다. 전력 증폭기는 40 MHz, 오차 증폭기는 40 MHz, 80 MHz 대역에서 이득 평탄도를 변화시키면서 측정하였다. 측정 결과, 오프셋 5 MHz 지점에서 20 dB 이상의 개선 효과를 나타내기 위해서는 전력 증폭기는 1.5 dB, 오차 증폭기는 0.5 dB 이내의 이득 평탄도를 가져야 함을 확인하였다. 또한, 오차 증폭기의 이득 평탄도에 따라 피드포워드 증폭기의 선형성이 급격히 변화하였으며, 오차 증폭기의 이득 평탄도가 선형성 개선에 더 중요한 요소임을 확인하였다.