• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.3
• /
• pp.129-139
• /
• 2024

In this study, the SBC system, a new mechanical joint method, was developed to improve the constructability of precast concrete (PC) beam-column connections. The reliability of the finite element analysis model was verified through the comparison of experimental results and FEM analysis results. Recently, the intermediate moment frame, a seismic force resistance system, has served as a ramen structure that resists seismic force through beams and columns and has few load-bearing walls, so it is increasingly being applied to PC warehouses and PC factories with high loads and long spans. However, looking at the existing PC beam-column anchorage details, the wire, strand, and lower main bar are overlapped with the anchorage rebar at the end, so they do not satisfy the joint and anchorage requirements for reinforcing bars (KDS 41 17 00 9.3). Therefore, a mechanical joint method (SBC) was developed to meet the relevant standards and improve constructability. Tensile and bending experiments were conducted to examine structural performance, and a finite element analysis model was created. The load-displacement curve and failure pattern confirmed that both the experimental and analysis results were similar, and it was verified that a reliable finite element analysis model was built. In addition, bending tests showed that the larger the thickness of the bolt joint surface of the SBC, the better its structural performance. It was also determined that the system could improve energy dissipation ability and ductility through buckling and yielding occurring in the SBC.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.479-489
• /
• 2014

This paper presents a model-based image steganography method based on Watson's visual model. Model-based steganography assumes a model for cover image statistics. This approach, however, has some weaknesses, including perceptual detectability. We propose to use Watson's visual model to improve perceptual undetectability of model-based steganography. The proposed method prevents visually perceptible changes during embedding. First, the maximum acceptable change in each discrete cosine transform coefficient is extracted based on Watson's visual model. Then, a model is fitted to a low-precision histogram of such coefficients and the message bits are encoded to this model. Finally, the encoded message bits are embedded in those coefficients whose maximum possible changes are visually imperceptible. Experimental results show that changes resulting from the proposed method are perceptually undetectable, whereas model-based steganography retains perceptually detectable changes. This perceptual undetectability is achieved while the perceptual quality - based on the structural similarity measure - and the security - based on two steganalysis methods - do not show any significant changes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.23-28
• /
• 2014

This study investigates fluid flow and thermal stress at automotive exhaust manifolds as model 1 and 2. The maximum displacements happen at joint part connected with 4 pipes and upper middle of both parts in cases of model 1 and 2 respectively. At inner surface of the part connected with engine, maximum equivalent stresses of 991.85 and 698.96 MPa are shown in cases of model 1 and 2 respectively. As maximum velocities at the outlet at model 1 are shown at 19.46 and 14.61 m/s in cases of model 1 and 2 respectively, model 1 has more pressure drop than model 2. As result, model 2 has less pressure drop than 1. Model 2 has less deformation and stress than model 1. Model 2 has also less pressure drop than model 1. Therefore model 2 has more strength durability than model 1. This study result is applied with the design of safe automotive manifold and it can be useful to improve the durability by predicting prevention against the deformation due to exhaust gas.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.96-99
• /
• 2008

When the design modification is occurred, at present, design process based on 2-D spend more time and effort than that based on 3-D to modify related structural details. To improve and develop these processes, therefore, the design possibility of civil structures based on virtual model of 3-D must be investigated. We designed reinforced concrete pier of 3-D model, containing parameters. The parameters was defined as structural details like area of the section, reinforcement specification for design modification and structural analysis. In this paper, we researched about the processes modeling of reinforced concrete bridge pier based on parameters, the extracting data from the virtual model of 3-D, and the reflection of data to virtual model throughout structural analysis.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.339-344
• /
• 2012

Established continuous vocabulary recognition system improved recognition rate by using decision tree based tying modeling method. However, since system model cannot support the retrieve of phoneme data, it is hard to secure the accuracy. In order to improve this problem, we remodeled a system that could retrieve probabilistic model from continuous vocabulary clustering model to phoneme unit. Therefore in this paper showed 95.88%of recognition rate in system performance.

• The Korean Journal of Health Service Management
• /
• v.11 no.2
• /
• pp.129-142
• /
• 2017

Objectives : The purpose of this study was to identify the main variables of difference in high school students' oral health promotion behaviors among adolescents and to improve their academic and oral health promotion behaviors. Methods : The research subjects consisted of 311 high school students in Jeonju. Results : The adequacy of the hypothetical model accounted for 46.9 % of the oral health promotion behavior. The Redundancy of all variables showed the value of the positive values, indicating that the Goodness of fit was greater than the optimum value of the model, and the model of the PLS was a desirable model. The effects of perceived benefits, self efficacy, and social support on oral health promotion behaviors were found to be higher in oral health promotion behaviors. Conclusions : This study is expected to have a significant impact on the perception of the oral health promotion for adolescents in the future and will contribute to the expansion and generalization of Pender's oral health promotion model.

• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.141-155
• /
• 2006

This study is aimed at the development of a runoff forecasting model to solve the uncertainties occurring in the process of rainfall-runoff modeling and improve the modeling accuracy of the stream runoff forecasting, The study area is the downstream of Naeseung-chun. Therefore, time-dependent data was obtained from the Wolpo water level gauging station. 11 and 2 out of total 13 flood events were selected for the training and testing set of model. The model performance was improved as the measuring time interval$(T_m)$ was smaller than the sampling time interval$(T_s)$. The Neuro-Fuzzy(NF) and TANK models can give more accurate runoff forecasts up to 4 hours ahead than the Feed Forward Multilayer Neural Network(FFNN) model in standard above the Determination coefficient$(R^2)$ 0.7.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.586-589
• /
• 2004

This paper attempts to propose the decision support model, which can be employed for 22 mail centers to improve their operational efficiency and competitive. This model deals with both DEA method and system dynamics model. DEA is a management tool aimed to determine relative efficiency of independent decision making unit. We measured the relative efficiency between mail centers using CCR model and tried to find the reason for inefficiency mail centers. Also, we introduced the system dynamics model to present the strategic policy for mail center to strengthen their efficiency.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.109-116
• /
• 2008

The rapid change of computer and Internet environments produces a lot of data of various quality, Because this fact affects enterprise and organization, it demands the level evaluation on data quality, Thus, we propose mathematical model for quality evaluation on the base of data quality in this paper. And we propose the analysis model(web evaluation model, DQnA)) that analyzes and maintains data quality.

• Korean Management Science Review
• /
• v.23 no.2
• /
• pp.93-107
• /
• 2006

This paper attempts to improve the typical DEA model that is often used as a performance evaluation method for service firms. The after-sales service system in a Korean electronic company is chosen as a sample case. The performance evaluation method currently practiced in the firm was reviewed and some critical issues of the current method were discussed. DEA model would be considered a solution for solving those Issues. However, typical DEA models has various drawbacks in determining the weights over evaluation criteria. Proposed is the priority-constrained DEA model that accommodates the strategic Importance of each evaluation criterion. The results of the proposed model are compared with those of typical DEA models. It is shown that the priority-constrained DEA model is superior to the others in terms of evaluation quality.