• ETRI Journal
• /
• v.18 no.2
• /
• pp.87-106
• /
• 1996

This paper proposes a new model as a framework for forecasting demand and technological substitution, which can accommodate different patterns of technological change. This model, which we named, "Adaptive Diffusion Model", is formalized from a conceptual framework that incorporates several underlying factors determining the market demand for technological products. The formulation of this model is given in terms of a period analysis to improve its explanatory power for dynamic processes in the real world, and is described as a continuous form which approximates a discrete derivation of the model. In order to illustrate the applicability and generality of this model, time-series data of the diffusion rates for some typical products in electronics and telecommunications market have been empirically tested. The results show that the model has higher explanatory power than any other existing model for all the products tested in our study. It has been found that this model can provide a framework which is sufficiently robust in forecasting demand and innovation diffusion for various technological products.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.213-219
• /
• 2016

Most existing studies on the wide-area differential global positioning system (WADGPS) employed a grid ionosphere model for error correction in the ionospheric delay. The present study discusses the application of satellite-based ionospheric delay model that provides an error model as a plane function with regard to individual satellites in order to improve accuracy in the WADGPS. The satellite-based ionospheric delay model was developed by Stanford University in the USA. In the present study, the algorithm in the model is applied to the WADGPS system and experimental results using measurements in the Korean Peninsula are presented. Around 1 m horizontal accuracy was exhibited in the existing planar fit grid model but when the satellite-based model was applied, correction performance within 1 m was verified.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.91-94
• /
• 2005

A numerical formula that presents relationship between a point of a satellite image and its ground position is called a sensor model. For precise geolocation of satellite images, we need an error-free sensor model. However, the sensor model based on GOES ephemeris data has some error, in particular after Image Motion Compensation (IMC) mechanism has been turned off. To solve this problem, we investigate three sensor models: Collinearity model, Direct Linear Transform (DLT) model and Orbit-based model. We apply matching between GOES images and global coastline database and use successful results as control points. With control points we improve the initial image geolocation accuracy using the three models. We compare results from three sensor models that are applied to GOES-9 images. As a result, a suitable sensor model for precise geolocation of GOES-9 images is proposed.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.49-60
• /
• 2005

Existing CAD systems have configured geometry data and it is necessary to extend the configured geometry into a knowledge-based system. An intelligent CAD system emerged to provide such a knowledge-based system. However the intelligent CAD system has a limited product model to represent various knowledge models. This paper presents a model, called extended intelligent CAD model, which can extend the product model of the intelligent CAD system into further detailed knowledge model. The extended intelligent CAD model includes a whole design process knowledge and an efficiency of the model has been verified via a knowledge based wiper design system. The model can improve the functionality and efficiency of the existing CAD systems.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1335-1349
• /
• 2019

Crowdsensing technologies can improve the efficiency of smart parking system in comparison with present sensor based smart parking system because of low install price and no restriction caused by sensor installation. A lot of sensing data is necessary to predict parking lot saturation in real-time. However in real world, it is hard to reach the required number of sensing data. In this paper, we model a saturation predication combining a time-based prediction model and a sensing data-based prediction model. The time-based model predicts saturation in aspects of parking lot location and time. The sensing data-based model predicts the degree of saturation of the parking lot with high accuracy based on the degree of saturation predicted from the first model, the saturation information in the sensing data, and the number of parking spaces in the sensing data. We perform prediction model learning with real sensing data gathered from a specific parking lot. We also evaluate the performance of the predictive model and show its efficiency and feasibility.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.1
• /
• pp.9-15
• /
• 2003

To improve the performance of PID controller of high order systems by model reduction, we proposed two model reduction methods. One, Original model with two point $({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$ in Nyquist curve used gradient base method and genetic algorithm. The other, Original model without two point$({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$in Nyquist curve used to add very small dead time. This method has annexed very small dead time on the base model for reduction, and we remove it after getting the reduced model, and , we improved Smith-predictor for a dead-time compensator using genetic algorithms. This method considered four points$({\angle}G(jw)=0,\;-\pi/2,\;-\pi,\;-3\pi/2)$ in the Nyquist curve to reduce steady state error between original and reduced model. It is shown that the proposed methods have more performance than the conventional method.

• Communications for Statistical Applications and Methods
• /
• v.28 no.5
• /
• pp.521-536
• /
• 2021

As life expectancies increase continuously over the world, the accuracy of forecasting mortality is more and more important to maintain social systems in the aging era. Currently, the most popular model used is the Lee-Carter model but various studies have been conducted to improve this model with one of them being 6-parametric factor model (6-PFM) which is introduced in this paper. To this new model, long short-term memory (LSTM) and regularized LSTM are applied in addition to vector autoregression (VAR), which is a traditional time-series method. Forecasting accuracies of several models, including the LC model, 4-PFM, 5-PFM, and 3 6-PFM's, are compared by using the U.S. and Korea life-tables. The results show that 6-PFM forecasts better than the other models (LC model, 4-PFM, and 5-PFM). Among the three 6-PFMs studied, regularized LSTM performs better than the other two methods for most of the tests.

• International Journal of Automotive Technology
• /
• v.7 no.4
• /
• pp.449-457
• /
• 2006

The driver model during drift cornering was examined, and a technique to improve vehicle movement performance during drift cornering was investigated. Based on the results obtained, the driver was found to steer using feedback of the body slip angle and the body slip angle velocity during drift cornering. Moreover, improvement of the cornering force characteristic, at which exceeded the maximum cornering force calm as much as possible is important.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.10
• /
• pp.427-437
• /
• 1986

Identification of the plants is not easy task especially in the fields of process control. From this point of view, Kitamori developed a method of control system design based on partial knowledge about controlled processes. However, it is difficult to control the oscillatory plant by kitamori's method. In this paper, we develope a method of partial model matching control system design, which have desirable pole-placements in order to improve the above defects. Design examples are given to illustrate the effectiveness of the method.

• Convergence Security Journal
• /
• v.1 no.1
• /
• pp.37-45
• /
• 2001

In this paper, separated and optimized pattern database model is proposed. In order to improve efficiency of Network-based IDS, pattern database is classified by proper basis. Classification basis is decided by the specific Intrusions validity on specific target. Using this model, IDS searches only valid patterns in pattern database on each captured packets. In result, IDS can reduce system resources for searching pattern database. So, IDS can analyze more packets on the network. In this paper, proper classification basis is proposed and pattern database classified by that basis is formed. And its performance is verified by experimental results.