• Journal of Biomedical Engineering Research
• /
• v.45 no.1
• /
• pp.10-19
• /
• 2024

The purpose of this study is to conduct a summative evaluation of the usability of a general-purpose ventilator to determine whether it can be used for its intended purpose in the intended environment by the intended user and to find possible errors in use. The importance of ventilators has increased due to the accelerated aging of the population and the impact of the pandemic. In addition, patients who require ventilators are often in critical condition, so even a small error in use can be fatal. Therefore, it is important to ensure that the ventilator has sufficient stability and can be used satisfactorily without inconvenience to the user. In this study, we conducted a usability test with 17 respiratory nurses with more than 3 years of experience using the ventilator. We analyzed the task success rate, satisfaction, and opinions of the intended users while going through a total of 17 scenarios. Satisfaction was captured through an ASQ questionnaire and subjective opinions were captured through a detailed opinion questionnaire. The results showed a high level of satisfaction with an average score of 6.3 for the use scenarios. Evaluators expressed satisfaction with the overall visibility and versatility of the features, but noted that improvements were needed for calibration tasks with low task success rates. As the calibration method is different from other equipment, it was suggested that specific explanations of the calibration method and the picture that appears when calibrating are needed, and that if relevant training is provided, the equipment can be used without problems. If the usability evaluation is not limited to securing efficiency and satisfaction from the intended users, but also continuously receives feedback from users to prepare for use in emergency environments such as pandemic situations, it will be very helpful to seize opportunities such as emergency authorization in future situations, and ultimately contribute to patient safety by reducing use errors.

• Korean Journal of Materials Research
• /
• v.34 no.4
• /
• pp.185-193
• /
• 2024

In this study, NASICON-type Li_1+XGa_XTi_2-X(PO₄)₃ (x = 0.1, 0.3 and 0.4) solid-state electrolytes for all-solid-state batteries were synthesized through the sol-gel method. In addition, the influence on the ion conductivity of solid-state electrolytes when partially substituted for Ti⁴⁺ (0.61Å) site to Ga³⁺ (0.62Å) of trivalent cations was investigated. The obtained precursor was heat treated at 450 ℃, and a single crystalline phase of Li_1+XGa_XTi_2-X(PO₄)₃ systems was obtained at a calcination temperature above 650 ℃. Additionally, the calcinated powders were pelletized and sintered at temperatures from 800 ℃ to 1,000 ℃ at 100 ℃ intervals. The synthesized powder and sintered bodies of Li_1+XGa_XTi_2-X(PO₄)₃ were characterized using TG-DTA, XRD, XPS and FE-SEM. The ionic conduction properties as solid-state electrolytes were investigated by AC impedance. As a result, Li_1+XGa_XTi_2-X(PO₄)₃ was successfully produced in all cases. However, a GaPO₄ impurity was formed due to the high sintering temperatures and high Ga content. The crystallinity of Li_1+XGa_XTi_2-X(PO₄)₃ increased with the sintering temperature as evidenced by FE-SEM observations, which demonstrated that the edges of the larger cube-shaped grains become sharper with increases in the sintering temperature. In samples with high sintering temperatures at 1,000 ℃ and high Ga content above 0.3, coarsening of grains occurred. This resulted in the formation of many grain boundaries, leading to low sinterability. These two factors, the impurity and grain boundary, have an enormous impact on the properties of Li_1+XGa_XTi_2-X(PO₄)₃. The Li_1.3Ga_0.3Ti_1.7(PO₄)₃ pellet sintered at 900 ℃ was denser than those sintered at other conditions, showing the highest total ion conductivity of 7.66 × 10^-5 S/cm at room temperature. The total activation energy of Li-ion transport for the Li_1.3Ga_0.3Ti_1.7(PO₄)₃ solid-state electrolyte was estimated to be as low as 0.36 eV. Although the Li_1+XGa_XTi_2-X(PO₄)₃ sintered at 1,000 ℃ had a relatively high apparent density, it had less total ionic conductivity due to an increase in the grain-boundary resistance with coarse grains.

• Journal of Korea Water Resources Association
• /
• v.57 no.4
• /
• pp.237-248
• /
• 2024

Watershed runoff that is an important component of the hydrological processes has been significantly altered by climate variability and human activities in many watersheds around the world. It is important to investigate the impacts of climate variability and human activities on watershed runoff change for water resource management. In this study, using watershed runoff data for 109 middle-sized watersheds in Korea, the impacts of climate variability and human activities on watershed runoff change were quantitatively evaluated. Using the Pittitt test, the analysis period was divided into two sub-periods, and the impacts of climate variability and human activities on the watershed runoff change were quantified using the Budyko hypothesis-based climate elasticity method. The overall results indicated that the relative contribution of climate variability and human activities to the watershed runoff change varied by middle-sized watersheds, and the dominant factors on the watershed runoff change were identified for each watershed among climate variability and human activities. The results of this study enable us to predict the watershed runoff change considering climate variability and watershed development plans, which provides useful information for establishing a water resource management plan to reduce the risk of hydrological disasters such as drought or flood.

• Journal of Chest Surgery
• /
• v.57 no.2
• /
• pp.160-168
• /
• 2024

Background: Data on perioperative outcomes of emergent versus elective resection in esophageal cancer patients requiring esophagectomy are lacking. We investigated whether emergent resection was associated with increased risks of morbidity and mortality. Methods: Data on patients with esophageal malignancy who underwent esophagectomy from 2005 to 2020 were retrospectively analyzed from the American College of Surgeons National Surgical Quality Improvement Program database. Thirty-day complication and mortality rates were compared between emergent esophagectomy (EE) and non-emergent esophagectomy. Logistic regression assessed factors associated with complications and mortality. Results: Of 10,067 patients with malignancy who underwent esophagectomy, 181 (1.8%) had EE, 64% had preoperative systemic inflammatory response syndrome, sepsis, or septic shock, and 44% had bleeding requiring transfusion. The EE group had higher American Society of Anesthesiologists (ASA) class and functional dependency. More transhiatal esophagectomies and diversions were performed in the EE group. After EE, the rates of 30-day mortality (6.1% vs. 2.8%), overall complications (65.2% vs. 44.2%), bleeding, pneumonia, prolonged intubation, and positive margin (17.7% vs. 7.4%) were higher, while that of anastomotic leak was similar. On adjusted logistic regression, older age, lower albumin, higher ASA class, and fragility were associated with increased complications and mortality. McKeown esophagectomy and esophageal diversion were associated with a higher risk of postoperative complications. EE was associated with 30-day postoperative complications (odds ratio, 2.39; 95% confidence interval, 1.66-3.43; p<0.0001). Conclusion: EE was associated with a more than 2-fold increase in complications compared to elective procedures, but no independent increase in short-term mortality. These findings may help guide data-driven critical decision-making for surgery in select cases of complicated esophageal malignancy.

• Journal of the Korean Society for Library and Information Science
• /
• v.58 no.1
• /
• pp.303-328
• /
• 2024

In this study, we designed and verified a research model in order to determine whether ESG management for public libraries affects the perception of libraries, user satisfaction, and the intention to revisit. A survey was conducted among the users of six public libraries in the Gyeonggi region and 25 libraries in Seoul, and 247 valid responses from the survey were analyzed. The analysis revealed that the environment and society factors of ESG management had a positive effect on the perception of libraries and user satisfaction. It also showed that the libraries' perception had a positive impact on user satisfaction and the intention to revisit, and user satisfaction showed a positive correlation for the intention to revisit. From the analysis, we can infer that the effects of ESG management were reflected in everyday life via public libraries as ESG management of the public libraries influenced the perception of libraries, user satisfaction, and the intention to revisit. We confirmed that users showed the intention to revisit if the library provides positive and sincere satisfaction through ESG management, due to public libraries having ethical and moral significance to users. We have also put forward practical marketing strategies and identified areas for enhancement that can prove beneficial to public libraries.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.3
• /
• pp.27-36
• /
• 2024

The effective control of cost overrun is a crucial issue for construction companies to secure profitability. Especially in situations where cost pressures are significant due to factors such as rising raw material prices and increased financial costs due to high-interest rate policies, cost overruns resulting from project failures have a highly detrimental impact on the profitability of construction firms. The objective of this study is to analyze the current status of cost overrun control measures adopted by construction companies using the IPA technique and provide key characteristics and implications. The IPA analysis results showed that practitioners in general contractors exhibit a high level of interest and effort regarding cost overrun while the performance level is relatively low. Nevertheless, the measures considered important to control cost overruns generally show a high tendency for execution as well. Cost overrun control measures that show high importance but low execution are primarily related to collaboration and communication sectors. To effectively control cost overruns, enhancing collaboration and communication with construction supervisors/CM, headquarters, and regulatory authorities emerged as the most urgent need. Through this study, the current status and areas for improvement regarding cost overrun control measures in general contractors can be identified. This can be valuable for deriving directions and enhancements for future cost overrun control strategy development.

• Journal of Industrial Convergence
• /
• v.22 no.5
• /
• pp.23-37
• /
• 2024

The purpose of this study is to investigate various factors affecting the relationship between digital leadership and digital transformation in companies. In particular, focusing on the mediating effect of dynamic digital capabilities that quickly sensing and seizing advanced and convergent digital technologies and apply them to the organization, this study also intends to examine the moderating effect of the organization's acceptance intention. The hypotheses were verified with a sample of 258 copies of data collected by conducting a survey on companies participating in mini-clusters in industrial complexes nationwide. As a result of the study, dynamic digital capabilities showed a significant mediating effect in the relationship between digital leadership and digital transformation, and the effect of dynamic digital capabilities on the level of digital transformation differed according to the organization's digital acceptance intention. This study presented a new concept and measurement items of digital dynamic capabilities, and how to consider digital leadership, dynamic digital capabilities and acceptance level of organization when promoting digital transformation in companies.

• Knowledge Management Research
• /
• v.25 no.2
• /
• pp.155-176
• /
• 2024

This study explores variations in preferences for human and AI agents within the medical and financial services. Study 1 investigates whether there are preferential disparities between human and AI agents across these service domains. It finds that human agents are favored over AI agents in medical services, while AI agents receive greater preference in the financial services. Study 2 delves into the underlying reasons for the preference differentials between human and AI agents by assessing the significance of certain capabilities as perceived by users in each domain. The findings reveal a mediating role of perceived empathy importance in the effect of service domains on human-AI preference. Furthermore, perceived empathy is deemed a more critical capability by users for preferring human over AI agents across both service domains compared to other capabilities such as experience and agency. This research is noteworthy for elucidating the variances in preferences for human and AI agents across medical and financial services and the rationale behind these differences. It enhances our theoretical comprehension of the pivotal factors influencing preferences for human and AI agents, underscoring the significance of human experiential capabilities like empathy.

• Korean Circulation Journal
• /
• v.53 no.12
• /
• pp.829-839
• /
• 2023

Background and Objectives: There is limited data on the impact of type 2 myocardial infarction (T2MI) during the coronavirus disease 2019 (COVID-19) pandemic. Methods: The National Inpatient Sample (NIS) database from January 2019 to December 2020 was queried to identify T2MI hospitalizations based on the appropriate International Classification of Disease, Tenth Revision-Clinical Modification codes. Monthly trends of COVID-19 and T2MI hospitalizations were evaluated using Joinpoint regression analysis. In addition, the multivariate logistic and linear regression analysis was used to compare inhospital mortality, coronary angiography use, and resource utilization between 2019 and 2020. Results: A total of 743,535 patients hospitalized with a diagnosis of T2MI were identified in the years 2019 (n=331,180) and 2020 (n=412,355). There was an increasing trend in T2MI hospitalizations throughout the study period corresponding to the increase in COVID-19 hospitalizations in 2020. The adjusted odds of in-hospital mortality associated with T2MI hospitalizations were significantly higher in 2020 compared with 2019 (11.1% vs. 8.1%: adjusted odds ratio, 1.19 [1.13-1.26]; p<0.01). In addition, T2MI hospitalizations were associated with lower odds of coronary angiography and higher total hospitalization charges, with no difference in the length of stay in 2020 compared with 2019. Conclusions: We found a significant increase in T2MI hospitalizations with higher in-hospital mortality, total hospitalization costs, and lower coronary angiography use during the early COVID-19 pandemic corresponding to the trends in the rise of COVID-19 hospitalizations. Further research into the factors associated with increased mortality can increase our preparedness for future pandemics.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.154-164
• /
• 2023

The Construction Technology Information System collects, processes, and provides the public with free of charge 16 types of construction technology-related texts or index information, such as construction standards, construction practices, and construction reports, required at construction sites to enhance domestic construction technology. This study judged that user satisfaction could be increased if the budget was allocated first to the most effective construction technology information DB establishment. For each type of construction technology information, the level of satisfaction felt by the population for the quantity provided and the value of use according to the acquisition and utilization of information were investigated. Reliability between independent variables and dependent variables through a multiple regression analysis process to identify how the demographic characteristics of the population affect user satisfaction and the factors that affect the use value of information for each type of construction technology information. and the correlation was analyzed. The correlation between the demographic characteristics of respondents and users' satisfaction with the provided quantity was generally low, but construction experience, age, etc. were found to have an effect on satisfaction with the provided quantity. In particular, among the demographic measurement items of respondents, the more construction experience they had, the higher their satisfaction level with the quantity provided of low-level technical standards, and it was analyzed that older age had an impact on satisfaction with the quantity provided for small and medium-sized business support information.