• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.462-465
• /
• 2005

The ITT Industry's Commercial Advanced Geo-Imager (CAGI) which is a recurrent version of imagers used in the GOES series was selected as the COMS Meteorological Imager (MI). The ITT Imager can conduct some special observation such as the space look, blackbody observation, and star sensing regularly or irregularly for its radiometric quality control. Because the GOES-9 which uses an ITT Imager has become operational over the Western Pacific and Eastern Asia positioned at 155 degrees East, the reception of the GOES-9 data is available in Korea. As a step of preparing the COMS MI operation, we conduct the analysis of the GOES-9 imager raw data and operation procedures and compare them with contents of the ITT Imager's manual.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.541-544
• /
• 2002

The reflective liquid crystal(LC) imager in one panel Liquid Crystal on Silicon(LCoS) System must have the properties such as fast response time, high contrast ratio(C/R) and voltage holding ratio(VHR) which are more related to the lifetime of imager than the others. As the high-output light including a short wavelength from UHP lamp is exposed to LCoS imager, the indium metal impurities, which decrease the C/R and VHR, are diffused from ITO thin film on glass. To ensure the high reliable LCoS imager for HD projection TV, we have studied the effects of the plasma treatment on ITO film to reduce impurities in imager.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.11
• /
• pp.1-7
• /
• 2016

In this paper, we proposed real-time relative radiometric calibration processing method for SWIR(Short Wavelength Infra-Red) sensor using 'Hyper-Spectral Imager'. Until now domestic research for Hyper-Spectral Imager has been performing with foreign sensor device. So we have been studying hyper spectral sensor device to meet domestic requirement, especially military purpose. To improve detection & identify capability in 'Hyper-Spectral Imager', it is necessary to expend sensing wavelength from visual and NIR(Near Infra-Red) to SWIR. We aimed to design real-time processor for SWIR sensor which can control the sensor ROIC(Read-Out IC) and process calibrate the image. To build Hyper-Spectral sensor device, we will review the SWIR sensor and its signal processing board. And we will analyze relative radiometric calibration processing method and result. We will explain several SWIR sensors, our target sensor and its control method, steps for acquisition of reference images and processing result.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.182-189
• /
• 2003

Communication Ocean Meteorological Satellite(COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service is planned to be launched onto Geostationary Earth orbit (GEO) in 2008 according to the korea national space program, For the development of the meteorological payload of COMS, imager, the characteristics of Modulation Transfer Function (MTF) for GEO meteorological imager is investigated and the theoretical MTF limit is analyzed for each spectral channel of the imager in the both cases of a currently operating GEO instrument technology and an advanced GEO instrument technology under development. This study shows that MTF value can be considerably low in the infrared channels with longer wavelength than 10㎛ due to diffraction effect so that the MTF performance of long wavelength infrared channels should be paid attention to for the development of the imager.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.66-74
• /
• 2002

The characteristics of the satellite image quality parameters driven by satellite imaging instrument are investigated. Since the satellite image is directly produced by the satellite imaging instrument, the satellite image quality depends on the imager performance highly. This is why the imager performance parameters are considered as an important part of the satellite image quality parameters. The imager performance parameters consist of spectral band parameters, ground sample distance(GSD) parameters, swath width parameters, imager Modulation Transfer Function (MTF), imager Signal to Noise Ratio(SNR), radiometric response characteristics parameters, pixel registration, and imager calibration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.698-702
• /
• 2016

Thermal imager is now regarded as one of the key observation devices for ISR activities and getting important more and more. As other detectors, however, the thermal detectors also have maximum input and therefore they will be saturated if the input IR energy exceeds the allowed range. The saturation in the thermal detector makes it impossible to distinguish the target from background, as a result, the thermal imager does not perform its own mission anymore. In order to get an insight related with the image saturation, this paper develops a saturation model for a thermal imaging system, not a thermal detector. The proposed modeling starts from analyzing the specification of a thermal imager. Coupled with the characteristic parameters of the object, the saturation model can be used to predict the distance on which the detector is saturated. The proposed saturation model prove its validity by applying it for the case of observing a flash-bang.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.891-894
• /
• 2002

We studied characteristics of polyimide (PI) about Liquid Crystal on Silicon (LCOS) microdisplay. In order to compare two kinds of PI and choose one PI, we measured some items. First, we measured thermal imidization of SE-7492, SE-5291 (Nissan) PI using FT-IR. The results of thermal imidization are same 85%for SE-7492 and 86% for SE-5291. The second, we measured voltage-holding ratio (VHR) of LCOS imager using two kinds PI and one liquid crystal (LC) that is a mixture developed by Merck. The third, we measured contrast ratio (C/R) of LCOS imager using function generator from ov to 4V. The results of VHR and C/R are higher LCOS imager using SE-7492 than LCOS imager using SE-5291. And last we measured response time and the result is same two types LCOS Imagers. So, we choose PI of LCOS imager and concluded that LC is much better matched of PI using SE-7492.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.198-199
• /
• 2000

다목적 실용위성 (KOMPSAT) 1호기에 탑재되는 해양관측카메라 Ocean Scanning Multi-spectral Imager (OSMI)는 해양 결상계의 노화에 따른 성능 변화 감지 및 보정을 위해 태양광 보정을 궤도운영 중 수행한다. 태양광 보정의 구조 및 광학적 특성을 분석하고 OSMI 주요 관측파장대역별로 태양광 보정계의 출력신호량을 예측하였다. 이 분석은 OSMI 센서보정 계획 및 영상 품질 이해에 유용할 것이다. (중략)

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.216-221
• /
• 2002

A spherical Earth surface is used fur realistic analysis of the geometrical performance characteristics about the variation of satellite altitude and 2-dimensional line-of-sight(LOS) tilt angle in a satellite imager using Time Delay and Integration(TDI) technique with fixed integration time. In the spherical Earth surface model TDI synchronization using LOS tilt is investigated as a solution to compensate geometric performance degradation due to altitude decrease. This result can be used fur a TDI CCD imager with variable integration time in a certain as well.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.112-115
• /
• 2005

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service is planned to be launched onto Geostationary Earth Orbit in 2008. The meteorological payload of COMS is an imager which will monitor meteorological phenomenon around the Korean peninsular intensively and of Asian-side full Earth disk periodically. The meteorological imager (MI) of COMS has 5 spectral channels, I visible channel with the resolution of I km at nadir and 4 infrared channels with the resolution of 4 km at nadir. The characteristics of the COMS MI are introduced in the view points of user requirements, hardware characteristics, and operation features.