• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2116-2120
• /
• 2007

본 논문은 어안 렌즈 카메라의 영상 왜곡 보정 처리 시스템 구현에 관한 것이다. 영상 보정 처리 알고리즘은 역맵핑기법을 적용하고 실시간 처리를 위해 DSP 프로세서를 사용하여 시스템을 구현하였다. 알고리즘 적용시 카메라의 왜곡 계수는 실시간 처리를 위해 룩업 테이블화하여 처리한다. 실험 결과, 원영상과 각도변화에 대한 PSNR 변화는 8.3%정도로 안정적 자연스러우며, 화질보다는 실시간 처리에 중점을 두어 한 프레임 $720{\times}480$ 왜곡영상 처리 시간이 약 31.3ms 소요되었다.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.78-88
• /
• 1995

For producing iron or steel products with good quality, the concentration of the material components should be analyzed quickly with high relability using XRF(Fluorescent X-Ray Spectrometer). Since the analysis results are much dependent upon the surface con- dition, the samples have to be prepared to have good test condition. This study presents an image processing system for inspecting the surface condition of the iron test sample. In order to use thd computer vision system, we need to develop a lighting device and image processing algorithm. For the adequate lighting device of inspection system, the indirect lighting device is contrived to cut the external light and provide uniform, stable and cold light. The image processing algorithm is aimed to reduce inspection time and to get similar analyzing results to those of the experienced operators. At first, the image processing algorithm checks whether the surface of the iron sample is ground well or not. Then, the defects; hole or dig are conted and surface condition is evaluated. In addition, the algorithm gives the reliability of the analyzing results in order to help operator's decision.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.344-354
• /
• 2009

Side scan sonar using acoustic wave plays a very important role in the underwater, sea floor, and shallow marine geologic survey. In this study, we have acquired side scan sonar data for the underwater man-made structures, artificial reefs and fishing grounds, installed and distributed in the survey area. We applied digital image processing techniques to side scan sonar data in order to improve and enhance an image quality. We carried out digital image processing with various kinds of filtering in spatial domain and frequency domain. We tested filtering parameters such as kernel size, differential operator, and statistical value. We could easily estimate the conditions, distribution and environment of artificial structures through the interpretation of side scan sonar.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.72-79
• /
• 1998

In this paper, image processing algorithm is studied to enhance the preciseness of the geometry while converting captured images to CAD data. A program is developed as a result. The code, in the image processing, utilizes outline trace, point data smoothing algorithm. It is capable of automatically generating design data by converting input image data to the CAD data. The output can be made in DXF, IGES formats. The current research can be utilized as a base data for the development of factory automation or flexible manufacturing system which adopt image processing based automatic inspection and measuring system.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.89-95
• /
• 2003

This research analyzes the cutting mechanism of A1100-H18 of commercially pure aluminum by image processing in SEM(Scanning Electron Microscope) for the measurement of strain rate distribution near a cutting edge in orthogonal micro-cutting. The distribution is measured using various methods in order. The methods are in-situ observations of cutting process in SEM, inputting image data, a computer image processing, calculating displacements by SSDA(Sequential Similarity Detection Algorithm) and calculating strain rates by FEM. The min results obtained are as follows: (1)It enables to measure a microscopic displacement near a cutting edge. (2) An application of this system to cutting process of various materials will help to make cutting mechanism clear.

• Journal of Information Processing Systems
• /
• 제13권2호
• /
• pp.370-384
• /
• 2017

The image segmentation is the most important operation in an image processing system. It is located at the joint between the processing and analysis of the images. Unsupervised segmentation aims to automatically separate the image into natural clusters. However, because of its complexity several methods have been proposed, specifically methods of optimization. In our work we are interested to the technique SFLA (Shuffled Frog-Leaping Algorithm). It's a memetic meta-heuristic algorithm that is based on frog populations in nature searching for food. This paper proposes a new approach of unsupervised image segmentation based on SFLA method. It is implemented and applied to different types of images. To validate the performances of our approach, we performed experiments which were compared to the method of K-means.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.716-723
• /
• 2014

Vibration measurement using image processing is a fully non-contact measurement method and has many application fields. The resolution of vibration data measured by image processing depends on the camera performance and is lower than that measured by accelerometers. This work discusses the method to increase resolution of vibration signal measured by image processing based on the image mosaic technique with a high-power lens. The working principle of resolution enhancement was explained theoretically and verified by several experiments. It was shown that the proposed method can measure vibrations of relatively large scale structures with increased resolutions.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2005년도 추계학술대회 및 정기총회
• /
• pp.175-181
• /
• 2005

This paper describes the development of on-line computer vision laboratories to teach the detailed image processing and pattern recognition techniques. The computer vision laboratories include distant image acquisition method, basic image processing and pattern recognition methods, lens and light, and communication. This study introduces a case study that teaches computer vision in distance learning environment. It shows a schematic of a distant loaming workstation and contents of laboratories with image processing examples. The study focus more on the contents of the vision Labs rather than internet application method. The study proposes the ways to improve the on-line computer vision laboratories and includes the further research perspectives

• 한국멀티미디어학회논문지
• /
• 제16권10호
• /
• pp.1189-1195
• /
• 2013

본 논문에서는 웹 환경에서 WebCL을 이용한 초고해상도 이미지 처리 기법의 성능을 분석하고자 한다. WebCL로 인한 성능의 변화를 측정하고 평가하기 위해 자바스크립트로 작성된 대표적인 이미지 처리 라이브러리인 Pixastic 라이브러리를 WebCL 기반의 코드로 수정하였다. WebCL 기반 라이브러리는 8K Ultra HD의 이미지에서 기존 라이브러리 대비 최대 4.2배의 성능 향상을 얻을 수 있었으며 평균적으로 2.8배의 성능 향상을 얻을 수 있었다.

• 전자공학회논문지 IE
• /
• 제45권2호
• /
• pp.20-27
• /
• 2008

본 논문에서는 TFT-LCD 편광필름의 결함을 검출하기 위한 새로운 영상처리기법을 제안한다. 레이저 반사광을 이용하여 획득한 편광필름 영상에서 우선 배경잡음을 제거하기 위하여 형태론적 영상처리기법(열림, 닫힘)을 사용한다. 배경잡음이 제거된 영상으로부터 결함을 검출하기 위하여 2차원 LMS 적응 예측기를 사용하여 밝은 결함을 검출하고 통계적 특성을 이용하여 어두운 결함을 검출한다. 산업현장에서 제공된 TFT-LCD 편광필름을 사용하여 제안된 기법의 성능을 평가한다.