• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.794-796
• /
• 1997

The superconducting magnetic energy storage (SMES) system is considered to be useful to charge or release an energy in power system because of the high efficiency and quick response. But we need much capital to construct and to operate a SMES. A site and capacity of SMES are important elements for effective operating and planning. In this paper, we proposed a performance function to determine an optimal site and capacity of SMES according to variety condition of power system such as fault point. In addition, to demonstrate the validity of a proposed method, the simulations were carried out on two-machine 5-bus system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.49-62
• /
• 2016

In this study, a solid oxide fuel cell (SOFC) system model including balance of plant (BOP) for building electric power generation is developed to study the effect of operating conditions on the system efficiency and power output. SOFC system modeled in this study consists of three heat-exchangers, an external reformer, burner, and two blowers. A detailed computational cell model including internal reforming reaction is developed for a planer SOFC stack which is operated at intermediate temperature (IT). The BOP models including an external reformer, heat-exchangers, a burner, blowers, pipes are developed to predict the gas temperature, pressure drops and flow rate at every component in the system. The SOFC stack model and BOP models are integrate to estimate the effect of operating parameters on the performance of the system. In this study, the design of experiment (DOE) is used to compare the effects of fuel flow rate, air flow rate, air temperature, current density, and recycle ratio of anode off gas on the system efficiency and power output.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1140-1145
• /
• 2014

Tunnel lighting is composed of entrance zone, interior zone and exit zone by KS C 3703. We have to consider adaptation at entrance zone and exit zone lighting to prevent deteriorate visibility like black hole and white hole phenomenon. So External luminance, vehicle velocity and traffic volume should be considered in threshold zone lighting and vehicle speed and traffic volume should be considered in interior zone lighting. But existing tunnel lighting system is not good at visibility and economic because that is only controled by external luminance. So in this paper, We improve visibility and economic of tunnel lighting system using fuzzy reasoning according to external luminance, vehicle velocity, traffic volume.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.10-12
• /
• 2000

As power systems tend to be operated more closely to their ultimate ratings. the role of SCOPF is changed and the importance for real-time security inhancement will be more increased in the new and competitive electricity market. This paper deals with the application of the SCOPF which make possible the On-Line application. The security margin of power system truly is changed according to the conditions or configuration of power system, therefore, the sensitivity factor related to the security is recalculated and the application should be updated in accordance with the state of power system. The proposed mechnism has been tested on modified Woolenberg 18-bus system and the results show more secure conditions against critical contingencies.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.92-95
• /
• 2002

A study on the system automation for the nitrogen splash slag coating in Basic Oxygen Blowing Furnace (BOF) is described. The engineers are trying to do their best efforts to increase the life of converter lining by developing improved refractory material and optimal operation techniques in the steel plants, A new slag coating method is needed to reduce the erosion rates of the refractory. In the current slag costing method, the BOF was swung back and forth. The new method uses the oxygen lance to blow the residual slag to the walls and cone of the converter. The nitrogen gas is used for blowing. This method is developed based on the automation process at factory in POSCO dated on the May 1998. The test results of nitrogen splash slag coating system for the BOF at POSCO are show to show the effectiveness of the system.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.389-391
• /
• 2001

The existing data systems and structures scope primarily the data evaluation which is performed by only corresponding or Interesting bodies. And the bodies i.e. electricity and energy utilities' quarters don't exchange the data each other because methods, purposes, etc. of the collection are different. This paper presents a new integrated system of data collection, administration and evaluation on the power system. And the system is applied to PSS/E data structures.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2217-2219
• /
• 2005

In this paper, an inter-comparison test of lightning impulse reference measurement system between Korea and Japan is reported. At present, such a direct comparison test as the activity to sustain the traceability of the measurement system is generally proposed. Due to the inter-comparison test, ascertaining the grade of the measurement uncertainty and maintaining the level of reference system are accomplished.

• Transportation Technology and Policy
• /
• v.12 no.2
• /
• pp.21-28
• /
• 2015

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.5
• /
• pp.1-11
• /
• 2021

The purpose of our research is to efficiently deform a 3D models which is composed of a triangular mesh and a skeleton. We designed a novel inverse kinematics (IK) solver that calculates the updated positions of mesh vertices with fewer computing operations. Through our user interface, one or more markers are selected on the surface of the model and their target positions are set, then the system updates the positions of surface vertices to construct a deformed model. The IK solving process for updating vertex positions includes many computations for obtaining transformations of the markers, their affecting joints, and their parent joints. Many of these computations are often redundant. We precompute those redundant terms in advance so that the 3-nested loop computation structure was improved to a 2-nested loop structure, and thus the computation time for a deformation is greatly reduced. This novel IK solver can be adopted for efficient performance in various research fields, such as handling 3D models implemented by LBS method, or object tracking without any markers.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.233-235
• /
• 2004

Operation of wind turbines has impacts on the voltage quantity at the connected electricity network. Increasing penetration of wind energy makes necessary to study the power quality regarding voltage variations(sag, swell, interruption) and presence of harmonics in the id. This paper investigates the voltage quality of low voltage customers connected to wind generation system. To study the influences of wind power generation to low voltage power system, voltage data are collected in three house using PQM(Power Quality Monitoring) equipment during one month and analyzed regarding voltage variation and harmonics