• Tuberculosis and Respiratory Diseases
• /
• v.63 no.1
• /
• pp.83-87
• /
• 2007

Idiopathic pulmonary fibrosis (IPF) is strongly associated with lung cancer compared with the general population. However, other types of idiopathic interstitial pneumonia (IIP) are rarely associated with lung cancer. We describe a case of a primary lung cancer associated with IIP other than IPF, which was considered to be nonspecific interstitial pneumonia (NSIP), and NSIP disappeared spontaneously after treating the primary lung cancer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.292-300
• /
• 2010

In this paper, we propose a RF front-end architecture based on hybrid conversion which is available to receive both broadband and multiband DVB-H receiver, and a multi-function circuit for implementing the RF front-end is fabricated. A multi-function circuit is operated as a sub-harmonic mixer mode in the case of receiving a broadband VHF/UHF band, which show a conversion loss of -10.0 dB, noise figure of 7.0 dB and IIP3 of 2.0 dBm. On the other hand, it is performed as a attenuation mode with a insertion loss of -10.0 dB in receiving a multiband, L-band.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.137-147
• /
• 2019

We identified the mediating role of interpersonal issues in the relationship between adult attachment type and emotional expression ambivalence. The subjects of the study were 327 emotional workers who lived in five cities. As the scale, ECR-R, AEQ-K, and IIP were used. Sobel verification was performed after multiple regression analysis. The results show that the interpersonal problem partially mediates between the attachment and emotional expression ambivalence. This suggests that the characteristics of interpersonal relationships affect emotional emotions in forming close attachment relationships of emotional workers. Subsequent research will expand the scope of research by supplementing the shortcomings of existing research.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.5
• /
• pp.447-455
• /
• 2006

Background: MMPs and TIMPs are important factors for abnormal remodeling the pulmonary parenchyme in idiopathic interstitial pneumonia(IIP) This study evaluated the expression of MMPs and TIMPs in the tissue of IPF, NSIP and normal control subjects. Method: The MMP-2 and -9 activity in the lung tissue was studied by gelatin zymography, and the expression of MMP-1, -2, -9, TIMP-1 and -2 in the lung tissue was measured by immunohistochemistry. Thirty five patients, who were diagnosed with IIP (UIP ; 22, NSIP ; 13), were enrolled in the immunohistochemical study. Thirteen patients with IIP (UIP ; 9, NSIP ; 4) and five patients with lung cancer were enrolled in the zymographic assay. Results: (1) The immunohistochemistry for MMP-1,-2,-9, TIMP-1 and-2 ; MMP-1,-9 and TIMP-2 were stained stronger in the UIP subjects than NSIP and the normal control. TIMP-2 was strongly stained in the UIP tissue. particularly the fibroblasts in the fibroblastic foci. (2) Zymography for MMP-2 and MMP-9 revealed MMP-2 to have prominent expression in the UIP tissue than in the NSIP tissue. Conclusions: These results suggest that the overexpression of the TIMPs and gelatinases in UIP might be important factors in the irreversible fibrosis of the lung parenchyme.

• Journal of information and communication convergence engineering
• /
• v.1 no.3
• /
• pp.139-142
• /
• 2003

In this paper, we consider the factors that affect a conversion loss performance in designing a single balanced diode mixer integrated with IRF(Image Reject Filter), based on the embedded electrical wavelength placed between the IRF and mixer, diode matching and LO drive amplifier. To evaluate the conversion loss performance, we suggest two types of a single balanced mixer using 90 degree branch line coupler, microstrip line and schottky diode. One is only mixer and the other is integrated with IRF and LO drive amplifier. The measured results of a single balance diode mixer integrated IRF show the conversion loss of 8.5 dB and the flatness of 1 dB p-p from 21.2 GHz to 22.6 GHz with 10 dBm LO. The measured input PI dB and IIP3 are 7 dBm and 15 dBm respectively under the nominal LO power level of 10dBm. The LO/RF and LO/IF isolation are 22 dB and 50 dB, respectively.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.112-116
• /
• 2005

This paper presents a broadband two-stage low noise amplifier(LNA) operating from 3 to 10 GHz, designed with 0.18 ${\mu}m$ RF CMOS technology, The cascode feedback topology and broadband matching technique are used to achieve broadband performance and input/output matching characteristics. The proposed UWB LNA results in the low noise figure(NF) of 3.4 dB, input/output return loss($S_{11}/S_{22}$) of lower than -10 dB, and power gain of 14.5 dB with gain flatness of $\pm$1 -dB within the required bandwidth. The input-referred third-order intercept point($IIP_3$) and the input-referred 1-dB compression point($P_{ldB}$) are -7 dBm and -17 dBm, respectively.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.541-544
• /
• 2004

This paper presents a new circuit panitioning algorithm using wire redundancy removal. This algorithm consist of the two steps. In the first step. We propose a new IIP(Iterative Improvement Partitioning) technique that selects the method to choice cells according to improvement status using two kinds of bucket structures, the one kept by total gain, and the other by updated gain. In the second step, we select the target wire in the cut-set. We add a alternative wire in the circuit to remove the target wire. For this we use wire redundancy removal and addition method The experimental results on MCNC benchmark circuits show improvement up to $41-50\%$ in cut-size over previous algorithms

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.415-418
• /
• 2007

This paper presents the design and analysis of LNA-Mixer for 2.45GHz RFID reader. The LNA is implemented by PCSNIM method for low power consumption. The Mixer is implemented by using the Gilbert-type configuration, current bleeding technique, and the resonating technique for the tail capacitance. The connection between the two designed circuits is made by active balun. This LNA-Mixer has about 35dB for -40dBm input RF power, LO power is 0dBm and RF frequency is 2.45 GHz and IIP3 is -4dBm. The layout of LNA-Mixer for one-chip design in a $0.18-{\mu}m$ TSMC process has 2.6mm ${\times}$ 1.3mm size.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.825-832
• /
• 2011

In this paper, we described the design and measurement results of a Front-End Receiver for S-band active phased array radar. The Front-End Receiver has input P1dB of -4dBm and IIP3 of 7dBm. The measurement results show that gain is $24{\pm}0.7dB$, noise figure are less than 2.3dB over the frequency range of $fc{\pm}0.2GHz$. The Front-End Receiver can protect the receiver path from large input signals with a maximum peak power of multi-kW and recovery time is less than 0.8us. The measurement results satisfy all specifications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.88-98
• /
• 2012

In this paper, the relationship between the bandwidth (BW) and power efficiency of a source follower based (SFB) filter is quantitatively analyzed, and a design methodology for a SFB filter for optimized BW - power consumption is introduced. The proposed design methodology achieves a maximum BW at a target quality (Q) factor for the given power consumption constraint by controlling design factors individually. In order to achieve the target BW from the maximized BW, a tuning method is introduced. Through the proposed design methodology, a fourth order Butterworth filter was implemented in 0.18 ${\mu}m$ CMOS technology. The measured BW, power consumption, and IIP3 are 100 MHz, 33 ${\mu}W$, and 9 dBm, respectively. Compared with other filter structures, the measured results show high BW - power efficiency.