• Title/Summary/Keyword: III-V materials

Search Result 255, Processing Time 0.029 seconds

Growth of 2dimensional Hole Gas (2DHG) with GaSb Channel Using III-V Materials on InP Substrate

  • Sin, Sang-Hun;Song, Jin-Dong;Han, Seok-Hui;Kim, Tae-Geun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.152-152
    • /
    • 2011
  • Silicon 기반의 환경에서 연구 및 제조되는 전자소자는 반도체의 기술이 발전함에 따라 chip 선폭의 크기가 30 nm에서 20 nm, 그리고 그 이하의 크기로 점점 더 작아지는 요구에 직면하고 있다. 탄소나노 구조와 나노와이어 기술이 Silicon을 대신할 다음세대 기술로 주목받고 있다. 많은 연구결과들 중에서 III-V CMOS가 가장 빠른 접근 방법이라 예상한다. III-V족 물질을 이용하면 electron 보다 수십 배 이상의 이동도를 얻을 수 있으나 p-type의 구조를 구현하는 것이 해결해야 할 문제이다. p-type 3-5 족 화합물을 이용하여 에너지 밴드 갭의 변화를 가능하게 한다면 hole의 이동도를 크게 향상시킬 수 있어 silicon 기반의 p-type 소자보다 2~3배 더 빠른 소자의 구현이 가능하다. 3-5족 화합물 반도체의 성장 기술이 많이 진보되어 이를 이용하여 고속 소자를 구현한다면 시기적으로 더욱 빨리 다가올 것이라 예측한다. 에너지 밴드갭의 변화와 격자 부정합을 고려하여 SI InP 기판에 GaSb 물질을 채널로 사용한 p-type 2-dimensional hole gas (2DHG) 소자를 구현하였다. 관찰된 소자 구조의 박막 상태의 특징을 보이며 10 um ${\times}$ 10 um AFM 측정결과 1 nm 이하의 표면 거칠기를 가지며 상온에서의 hole 이동도는 약 650 cm2/Vs이고 sheet carrier density는 $5{\times}1012$ /cm2의 결과를 확인하였다. 실험결과 InP 기판위에 채널로 사용된 GaSb 박막을 올리는데 있어 가장 중요한 것은 Phosphorus, Arsenic, 그리고 Antimony 물질의 양과 이들의 변화시간의 조절이다. 본 발표에서 Semi-insulating InP 기판위에 electron이 아닌 hole을 반송자로 이용한 차세대 고속 전자소자를 구현하고자 하여 MBE (Molecular Beam Epitaxy)로 p-type 소자를 구현하여 실험하였다. 아울러 더욱 빠른 소자의 구현을 위하여 세계의 유수 그룹들의 연구 결과들과 앞으로 예상되는 고속 소자에 대해서 비교와 함께 많은 기술에 대해 논의하고자 한다.

  • PDF

Assessment of the Usefulness of an IMRT Plan Using a Shell-Type Pseudo Target with Patients in Stage III or IV of NSCLC (비소세포폐암 III, IV기 환자에 있어서 Shell-Type Pseudo Target을 이용한 세기 조절 방사선치료계획기법의 유용성 평가)

  • Lee, Sang-Bong;Park, Ki-Ju;Park, Du-Chan;Kim, Man-Wo;Kim, Jun-Gon;Noh, Sung-Hwan
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.24 no.2
    • /
    • pp.95-106
    • /
    • 2012
  • Purpose: The objective of this study was to investigate the usefulness of an IMRT treatment plan according to whether there was a shell-type pseudo target during radiation therapy for patients in Stage III or IV of non-small cell lung cancer (NSCLC). Materials and Methods: After setting an IMRT (Intensity-Modulated Radiation Therapy, IMRT) plan for when there was a shell-type pseudo target (SPT) and when there was none (WSPT) with 22 patients in Stage III or IV of NSCLC, the investigator analyzed dose-volume histograms (DVHs) and made assessment with dosimetric comparisons such as homogeneity index (HI) inside the tumor target, conformity index (CI) of the tumor target, spinal cord maximum dose, Esophagus $V_{50%}$, mean lung dose (MLD), and $V_{40%}$, $V_{30%}$, $V_{20%}$, $V_{10%}$, $V_{5%}$. Results: The mean CI of WSPT and SPT was $1.22{\pm}0.04$ and $1.16{\pm}0.032$ ($.000^*$), respectively, and the mean HI of WSPT and SPT was $1.06{\pm}0.015$ and $1.07{\pm}0.014$ ($.000^*$), respectively. In SPT, the mean of each CI difference decreased by $-5.16{\pm}2.54%$, while HI increased by average $0.81{\pm}0.47%$. Esophagus $V_{50%}$ recorded $14.54{\pm}12.01%$ (WSPT) and $12.14{\pm}11.09%$ ($.000^*$, SPT) with the mean of SPT differences dropping by $-26.37{\pm}25.05%$. Mean spinal cord maximum dose was $3,898.44{\pm}1,075.0$ cGy (WSPT) and $3,810.8{\pm}1,134.9$ cGy ($.004^*$, SPT) with SPT dropping by average $-3.36{\pm}5.81%$. As for lung $V_{X%}$, the mean of $V_{5%}$ and $V_{10%}$ differences was $-1.62{\pm}2.29%$ ($.006^*$) and $-1.98{\pm}5.02%$ ($.005^*$), respectively with SPT making a decrease. The mean of V20%, V30%, and V40% differences was $-3.51{\pm}3.07%$ ($.000^*$), $-4.84{\pm}6.01%$ ($.000^*$), and $-6.16{\pm}8.46%$ ($.001^*$), respectively, with SPT making a decrease with statistical significance. In MLD assessment, SPT also dropped by average $-2.83{\pm}2.41%$ ($.000^*$). Those results show that SPT allows for mean 169 cGy (Max: 547 cGy, Min: 6.4 cGy) prescription dose. Conclusion: An IMRT treatment plan with SPT during radiation therapy for patients in Stage III or IV of NSCLC will help to reduce the risk of lung toxicity and radiation-induced pneumonia by cutting down radiation doses entering the normal lung, reduce the local control failure rate during radiation therapy due to increasing prescription doses to a certain degree, and increase treatment effects.

  • PDF

A Functionalised Macrobicycle Complex Available for Surface Immobilisation and Protein Grafting

  • Bernhardt, Paul V.;Harrowfield, Jack M.;Kim, Yang;Lee, Young-Hoon;Park, Yu-Cheol;Sujandi, Sujandi
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.4
    • /
    • pp.589-595
    • /
    • 2007
  • The conversion of both the racemic and resolved forms of the Co(III) complex of an hydroxymethyl-substituted tripodal hexamine to macrobicycles via reaction with formaldehyde and nitromethane (and subsequent reduction of the product) has been conducted. The prospect is that it will provide cage complexes in which the hydroxyl substituent is sufficiently remote from the metal ion centre for its nucelophilicity to be largely unaffected. X-ray structure determinations have been used to characterise these new cage species as well as some complexes of the precursor hexamine and its mono-aminal. The electrochemistry and optical activity of the complexes have also been studied in detail.

Electrical and magnetic properties of GaMnN with varying the concentrations of Mn and Mg

  • F.C. Yu;Kim, K.H.;Lee, K.J.;H.S. Kang;Kim, J.A.;Kim, D.J.;K.H. Baek;Kim, H.J.;Y.E. Ihm
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.03a
    • /
    • pp.109-109
    • /
    • 2003
  • III- V ferromagnetic semiconductor has attracted great attention as a potential application for spintronics due to a successful demonstration of spin injection from ferromagnetic GaNnAs into semiconductor. GaMnN may be one of the possible candidates for room temperature operation. Samples were grown on sapphire (0001) substrate at $650^{\circ}C$ via molecular beam epitaxy with a single Precursor of (Et$_2$Ga(N$_3$)NH$_2$$CH_3$) and solid source of Mn at different Mn source temperature. The background pressure is low 10$^{-10}$ Torr and the samples growth pressure was 1.4 $\times$ 10$^{-6}$ Torr.

  • PDF

A Study on the Development of Thin Film Type Humidity Sensor Materials by Sol-Gel Method (III) (졸겔법에 의한 박막형 습도센서 소재개발에 관한 연구 (III))

  • You, D.H.;Kang, D.H.;Lee, E.H.;Yuk, J.H.;Jeong, S.Y.;Lee, D.C.
    • Proceedings of the KIEE Conference
    • /
    • 1995.07c
    • /
    • pp.1162-1164
    • /
    • 1995
  • In this paper, $TiO_2$-xmol%$V_2O_5$, x=0.0, 1.0, 2.0, 3.0 specimens are fabricated by Sol-Gel method. For the improvement of humidity sensitive characteristics for specimens, their microstructures are analysed and the optimum processing condition is established. Grain size increases with substitution rate of $V^{5+}$, on $Ti^{4+}$ site. Their humidity sensitive characteristics is good at 1mol% of $V_2O_5$ rate and heat-treated at $700^{\circ}C$. The capacitance of specimens decreases with frequency.

  • PDF

Experimental Studies of the Pericardial Substitutes in Rabbits (가토에서 심낭대치물에 관한 실험적 연구)

  • Baeck, Seung-Hwan;Yang, Suk-Rhin;Kim, Sun-Han;Nam, Choong-Hee;Lee, Khil-Rho
    • Journal of Chest Surgery
    • /
    • v.22 no.5
    • /
    • pp.724-730
    • /
    • 1989
  • The development of severe pericardial adhesion after cardiovascular surgical procedures often increases the risk of injuring the heart, great vessels, or extracardiac grafts during resternotomy. Several pericardial substitutes have been tested in an attempt to facilitate reoperation with inconclusive results. This study was designed to evaluate the applicability of two different materials as pericardial substitutes to minimize the pericardial adhesion and epicardial reaction. A procedure for induction of pericardial adhesion was carried out in 30 rabbits. Rabbits were divided into three groups of ten rabbits each: Group 1[control, simple pericardial closure]: Group 2[bovine pericardium as pericardial substitute]: Group 3[e-polytetrafluoroethylene surgical membrane, e-PTFE as a pericardial substitute]. Bovine pericardium or e-PTFE surgical membrane was interposed between the sternum and the heart. Rabbits were sacrificed at 4 weeks after operation. The development of adhesions and epicardial reactions were graded as: none [I]; minimal[II]; moderate[Ill]; and severe[1V]. Histologic studies of the substitute, the pericardium, and the epicardium were performed. The results were as follows; l. In group 1[control group], the degree of pericardial adhesions were grade I in none, grade II in 1, grade III in 3, and grade 1V in 6 animals. Epicardial reactions were grade I in none, grade II in 3, grade K in 4, grade 1V in 3 animals respectively. 2. In group 2[bovine pericardium], the degree of pericardial adhesions were grade I in 1, grade II in 5, grade III in 3, and grade 1V in 1 animal. Epicardial reactions were grade I in 1, grade II in 2, grade III in 4, and grade 1V in 3 animals respectively. 3. In group 3[e-PTFE], the degree of pericardial adhesions were grade I in 7 animals, grade II in 2, grade III in 1, and grade g in none. Epicardial reactions were grade I in 4, grade II in 3, grade III in 2, and grade IV in 1 animal respectively. Pericardial adhesions more than grade II were 90.9% in group 1, 40 % in group 2, and 10% in group 3. Pericardial adhesions were significantly reduced in group 3 compared to group 1 or 2. Epicardial reactions more than grade II were 70 % in group 1, 70 % in group 2 and 30 % in group 3. We concluded that this 0.1mm thick polytetrafluoroethylene surgical membrane is a suitable pericardial substitute to minimize the development of pericardial adhesion or epicardial reaction following cardiovascular surgery.

  • PDF

Surface Hardness Measurement of Anodic Oxide Films on AA2024 based an Ink-Impregnation Method

  • Moon, Sungmo;Rha, Jong-joo
    • Journal of the Korean institute of surface engineering
    • /
    • v.53 no.2
    • /
    • pp.80-86
    • /
    • 2020
  • This paper is concerned with type of imperfections present within the anodic oxide films on AA2024 and surface hardness of the anodic film measured after ink-impregnation. The anodic oxide films were formed for 25 min at 40 mA/㎠ and 15±0.5℃ and 300 rpm of magnet stirring rate in 20% sulfuric acid solution. The ink-impregnation allows clear observations of not only the imperfections within the anodic oxide films but also an indentation mark on the oxide film surface made by a pyramidal-diamond penetrator for the hardness measurement. There were observed four different regions in the anodic oxide films on AA2024 and the surface hardness of the anodic oxide films appeared to be crucially dependent on the type of defects, showing 60~100 Hv on the oxide surface region I with large size black defect, 100~140 Hv on the oxide surface region II with large size grey defect, 140~170 Hv on the oxide surface region III with mall size black and/or grey defects and 170~190 Hv on the oxide surface region IV without defects. The pyramidal indentation marks were observed to be distorted in the regions with a large size black and grey defects, while no distortion of the indentation mark was observed in the regions with small size defects and without visible defects.

Thickness optimization of the bulk GaN single crystal grown by HVPE processing variable control (HVPE 법에서의 공정변수 조절에 의한 bulk GaN 단결정의 두께 최적화)

  • Park, Jae Hwa;Lee, Hee Ae;Lee, Joo Hyung;Park, Cheol Woo;Lee, Jung Hun;Kang, Hyo Sang;Kang, Suk Hyun;Bang, Sin Young;Lee, Seong Kuk;Shim, Kwang Bo
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.27 no.2
    • /
    • pp.89-93
    • /
    • 2017
  • GaN single crystals were grown by controlling of various processing parameters such as growing temperature, V/III ratio and growing rate. We optimized thickness of bulk GaN single crystal by analyzing defect of surface and inside of the GaN single crystal for application to high brightness and power device. 2-inch bulk GaN single crystals were grown by HVPE (hydride vapor phase epitaxy) on sapphire and their thickness was 0.3~7.0 mm. Crystal structure of the grown bulk GaN was analyzed by XRD (X-ray diffraction). The surface characteristics of the grown bulk GaN were observed by OM (optical microscope) and SEM (scanning electron microscopy) with measuring EPD (etch pits density) of the GaN crystals.

Factors predicting radiation pneumonitis in locally advanced non-small cell lung cancer

  • Kim, Myung-Soo;Lee, Ji-Hae;Ha, Bo-Ram;Lee, Re-Na;Lee, Kyung-Ja;Suh, Hyun-Suk
    • Radiation Oncology Journal
    • /
    • v.29 no.3
    • /
    • pp.181-190
    • /
    • 2011
  • Purpose: Thoracic radiotherapy is a major treatment modality of stage III non-small cell lung cancer. The normal lung tissue is sensitive to radiation and radiation pneumonitis is the most important dose-limiting complication of thoracic radiation therapy. This study was performed to identify the clinical and dosimetric parameters related to the risk of radiation pneumonitis after definitive radiotherapy in stage III non-small cell cancer patients. Materials and Methods: The medical records were reviewed for 49 patients who completed definitive radiation therapy for locally advanced non-small cell lung cancer from August 2000 to February 2010. Radiation therapy was delivered with the daily dose of 1.8 Gy to 2.0 Gy and the total radiation dose ranged from 50.0 Gy to 70.2 Gy (median, 61.2 Gy). Elective nodal irradiation was delivered at a dose of 45.0 Gy to 50.0 Gy. Seven patients (14.3%) were treated with radiation therapy alone and forty two patients (85.7%) were treated with chemotherapy either sequentially or concurrently. Results: Twenty-five cases (51.0%) out of 49 cases experienced radiation pneumonitis. According to the radiation pneumonitis grade, 10 (20.4%) were grade 1, 9 (18.4%) were grade 2, 4 (8.2%) were grade 3, and 2 (4.1%) were grade 4. In the univariate analyses, no clinical factors including age, sex, performance status, smoking history, underlying lung disease, tumor location, total radiation dose and chemotherapy were associated with grade ${\geq}2$ radiation pneumonitis. In the subgroup analysis of the chemotherapy group, concurrent rather than sequential chemotherapy was significantly related to grade ${\geq}2$ radiation pneumonitis comparing sequential chemotherapy. In the univariate analysis with dosimetric factors, mean lung dose (MLD), $V_{20}$, $V_{30}$, $V_{40}$, MLDipsi, $V_{20}$ipsi, $V_{30}$ipsi, and $V_{40}$ipsi were associated with grade ${\geq}2$ radiation pneumonitis. In addition, multivariate analysis showed that MLD and V30 were independent predicting factors for grade ${\geq}2$ radiation pneumonitis. Conclusion: Concurrent chemotherapy, MLD and $V_{30}$ were statistically significant predictors of grade ${\geq}2$ radiation pneumonitis in patients with stage III non-small cell lung cancer undergoing definitive radiotherapy. The cutoff values for MLD and $V_{30}$ were 16 Gy and 18%, respectively.

III-V Tandem, CuInGa(S,Se)2, and Cu2ZnSn(S,Se)4 Compound Semiconductor Thin Film Solar Cells (3-5족 적층형과 CuInGa(S,Se)2 및 Cu2ZnSn(S,Se)4 화합물반도체 박막태양전지)

  • Jeong, Yonkil;Park, Dong-Won;Lee, Jae Kwang;Lee, Jaeyoung
    • Applied Chemistry for Engineering
    • /
    • v.26 no.5
    • /
    • pp.526-532
    • /
    • 2015
  • Solar cells with other alternative energies are being importantly recognized related with post-2020 climate change regime formation. In a point of view of materials, solar cells are classified to organic and inorganic solar cells which can provide a plant-scale electricity. In particular, recent studies about compound semiconductor solar cells, such as III-V tandem solar cells, chalcopyrite-series CIGSSe solar cells, and kesterite-series CZTSSe solar cells were rapidly accelerated. In this report, we introduce a research trend and technical issues for the compound semiconductor solar cells.