• 제목/요약/키워드: II error

검색결과 515건 처리시간 0.024초

신용평가모형에서 타당성검증 통계량들의 판단기준 (Criterion of Test Statistics for Validation in Credit Rating Model)

  • 박용석;홍종선;임한승
    • Communications for Statistical Applications and Methods
    • /
    • 제16권2호
    • /
    • pp.239-347
    • /
    • 2009
  • 신용평가모형의 판별력에 대한 검정방법으로 콜모고로프-스미르노프, 평균차이, AUROC, AR등과 같은 통계량이 널리 사용되고 있다. 이러한 통계량들의 판단기준은 정규분포 가정 하에서 평균차이를 기준으로 설정되었다. 본 연구에서는 모의 실험을 통해서 표본크기, 불량률 그리고 제II종 오류율을 고려하는 대안적인 판단기준을 제 안하고 현재 적용되고 있는 판단기준과 비교해본다. 또한 판별력 정도에 따른 각 통계량들의 의미를 10단계로 정의하고 모의 실험 결과와 현재 적용되고 있는 판단기준을 비교해 본다.

Output-error state-space identification of vibrating structures using evolution strategies: a benchmark study

  • Dertimanis, Vasilis K.
    • Smart Structures and Systems
    • /
    • 제14권1호
    • /
    • pp.17-37
    • /
    • 2014
  • In this study, four widely accepted and used variants of Evolution Strategies (ES) are adapted and applied to the output-error state-space identification problem. The selection of ES is justified by prior strong indication of superior performance to similar problems, over alternatives like Genetic Algorithms (GA) or Evolutionary Programming (EP). The ES variants that are being tested are (i) the (1+1)-ES, (ii) the $({\mu}/{\rho}+{\lambda})-{\sigma}$-SA-ES, (iii) the $({\mu}_I,{\lambda})-{\sigma}$-SA-ES, and (iv) the (${\mu}_w,{\lambda}$)-CMA-ES. The study is based on a six-degree-of-freedom (DOF) structural model of a shear building that is characterized by light damping (up to 5%). The envisaged analysis is taking place through Monte Carlo experiments under two different excitation types (stationary / non-stationary) and the applied ES are assessed in terms of (i) accurate modal parameters extraction, (ii) statistical consistency, (iii) performance under noise-corrupted data, and (iv) performance under non-stationary data. The results of this suggest that ES are indeed competitive alternatives in the non-linear state-space estimation problem and deserve further attention.

기능점수를 이용한 소프트웨어 규모추정 실증연구 (An Empirical Study of SW Size Estimation by using Function Point)

  • 김승권;이종무;박호인
    • 디지털산업정보학회논문지
    • /
    • 제7권2호
    • /
    • pp.115-125
    • /
    • 2011
  • An accurate estimation of software development size is an important factor in calculating reasonable cost of project development and determining its success. In this study, we propose estimation models, using function point based on the functional correlation between software, with empirical data. Three models($FP_{est}(I)$, $FP_{est}(II)$, $FP_{est}(III)$) are developed with correlation and regression analysis. The validity of the models is evaluated by the significance test by comparing values of Mean Magnitude of Relative Error (MMRE) and predictions of each model at level n%. Model $FP_{est}(III)$ proved to be superior to other models such as IFPC(Indicative Function Point Count), EFPC(Estimated Function Point Count), EPFS(Early Prediction of Function Size), $FP_{est}(I)$, and $FP_{est}(II)$. As a result, the accuracy of the model appears to be very high to determine the usefulness of the model to finally overcome weakness of other estimation models. The model can be efficiently used to estimate project development size including software size or manpower allocation.

DR3M-II를 이용한 도시배수유역의 유출해석 (Runoff Analysis of Urban Drainage Using DR3M-II)

  • 민상기;이길춘
    • 한국수자원학회논문집
    • /
    • 제38권9호
    • /
    • pp.699-711
    • /
    • 2005
  • 미국 지질조사국(U.S Geological Survey)의 강우-유출모형 DR3M-II(Distributed Routing Rainfall-Runoff Model)를 이용해 도시배수유역의 유출해석을 수행하였다. DR3M-II는 강우사상을 입력자료로 하여 수지상의 관거 또는 자연수로망으로 구성된 도시유역에서의 유출추적을 위해 개발된 모형이다. 대상유역인 산본신도시에서의 실측유출자료를 이용한 모형의 검정 및 검증을 수행하였으며, Rosenbrock기법을 이용해 최적매개변수를 유도하였다. 검증결과 첨두유출량의 평균오차는 $7.4\%$로 상당히 양호한 결과를 보여주었다. 매개변수에 대한 민감도 분석결과 비교적 작은 강우강도의 비가 내릴 경우는 유효 불투수지역의 면적이 첨두유출량이나 유출체적에 가장 민감한 영향을 미치는 인자였으나, 큰 강우강도에서는 조도계수와 유역경사를 정의하는 운동파방정식의 계수 ${\alpha}$가 가장 민감한 영향을 미치는 인자인 것으로 나타났다. 대체적으로 첨두유출량보다는 유출체적이 침투능이나 토양함수조건을 정의하는 매개변수에 보다 민감한 반응을 보였으며, 매개변수 ${\alpha}$는 첨두유출량에 보다 민감한 영향을 미치는 것으로 나타났다.

다목적 유전자알고리즘을 이용한 Tank 모형 매개변수 최적화(I): 방법론과 모형구축 (Optimization of Tank Model Parameters Using Multi-Objective Genetic Algorithm (I): Methodology and Model Formulation)

  • 김태순;정일원;구보영;배덕효
    • 한국수자원학회논문집
    • /
    • 제40권9호
    • /
    • pp.677-685
    • /
    • 2007
  • 본 연구의 목적은 개념적인 강우-유출모형인 Tank 모형의 매개변수를 산정하기 위한 다목적 유전자알고리즘의 적용성을 평가하는 것이다. 다목적 유전자알고리즘 기법으로는 최근에 가장 많이 사용되는 기법중의 하나인 NSGA-II를 채택하여 Tank 모형과 결합하였으며, 4가지 목적함수(유출용적오차, 평균제곱근 오차, 고수유량 평균제곱근 오차 및 저수유량 평균제곱근 오차)값을 최소화하는 형태의 목적함수를 적용하였다. NSGA-II는 목적함수의 개수가 많아지면 한 번의 실행에 의해 굉장히 많은 수의 파레토최적해를 구하는 단점을 가지고 있기 때문에 구해진 파레토최적해 중에서 어떤 해가 최우선해 인지를 결정해야 할 필요가 있으며, 이러한 고차원적인 의사결정을 위하여 선호적순서화(preference ordering) 기법을 적용하였다. NSGA-II를 이용하여 Tank모형의 매개변수를 추정할 때 초기조건이 최적화과정에 미칠 수 있는 영향을 최소화하기 위해 세대수(generation number)와 개체군의 크기(population size)에 대한 민감도분석을 수행하였다. 분석결과 Tank모형의 매개변수 최적화를 위한 세대수와 개체군 크기의 초기 값을 각각 900번과 1000개로 선정하는 것이 적합한 것으로 나타났다.

Partially Dehydrated Fully Zn2+-exchanged Zeolite Y (FAU, Si/Al = 1.70) and Its Structure

  • Seo, Sung Man;Kim, Young Hun;Lee, Seok Hee;Lim, Woo Taik
    • 한국토양비료학회지
    • /
    • 제46권2호
    • /
    • pp.87-91
    • /
    • 2013
  • The crystal structure of partially dehydrated fully $Zn^{2+}$-exchanged zeolite Y was determined by X-ray diffraction techniques in the cubic space group $Fd\bar{3}m$ at 294(1) K and refined to the final error indices $R_1/wR_2$ = 0.035/0.119 for $|Zn_{35.5}(H_2O)_{13}|[Si_{121}Al_{71}O_{384}]$-FAU. About 35.5 $Zn^{2+}$ ions per unit cell are found at six distinct positions; sites I, I', a second I', II', II, and a second II. In sodalite cavities, the 11 water molecules coordinate to Zn(I'b) and/or Zn(II') ions; each of two $H_2O$ bonds to a Zn(IIb) in supercages. Two different $Zn^{2+}$ positions near 6-oxygen ring are due to their Si-Al ordering in tetrahedral site by Si/Al ratio leading to the different kinds of 6-rings.

기어 소음 품질 안정화를 위한 전달오차 측정 시스템 개발 및 전달오차 스펙 개발에 대한 연구 (A Research for the Development of the Transmission Error Measuring System and Transmission Error Specification for the Gear Noise Quality)

  • 이상화;이현구;강석찬;김시웅;유동규;원광민;채금묵;이태휘
    • 한국소음진동공학회논문집
    • /
    • 제24권6호
    • /
    • pp.470-475
    • /
    • 2014
  • In the past, transmission error(T.E.) has been identified as one of the main sources of gear whine noise, which cause serious passengers irritation at high frequency. In this study, to identify the correlation of the T.E. and gear whine noise, a T.E. measuring system was developed. By comparing the T.E. and gear whine noise level, T.E. target value which can represent the gear noise was proposed. The conclusions are followed: (I) It is possible to measure T.E. of the gear pairs (II) Similar trends are observed between T.E. and gear whine noise. (III) By observing the T.E. pattern, presence of sideband noise can be predicted. (IV) Proposed T.E. target value can be adopted to the gear manufacturing for gear noise quality management.

Takagi-Sugeno 추론기법과 신경망을 연계한 뉴로-퍼지 홍수예측 모형의 구축 및 적용 (II) : 실제 유역에 대한 적용 및 검증 (Establishment and Application of Neuro-Fuzzy Flood Forecasting Model by Linking Takagi-Sugeno Inference with Neural Network (II) : Application and Verification)

  • 최승용;한건연
    • 한국수자원학회논문집
    • /
    • 제44권7호
    • /
    • pp.537-551
    • /
    • 2011
  • 본 연구에서는 앞선 연구를 통해 선정된 최적 입력 자료 조합을 이용하여 한강수계의 왕숙천과 금강유역의 갑천에 대한 Takagi-Sugeno 퍼지기법과 신경망을 연계한 뉴로-퍼지 홍수예측 모형을 구축하였다. 구축된 뉴로-퍼지 홍수예측 모형을 한강수계의 왕숙천과 금강유역의 갑천에 적용하여 30분, 60분, 90분, 120분, 150분, 180분의 선행시간에 대해 각각 홍수예측을 수행하였다. 선행시간별 예측수위를 관측수위와 비교한 결과 안정되고 정확도 높은 홍수예측을 하는 것을 확인할 수 있었다. 추가적으로 정량적 평가를 위해 평균제곱근 오차(Root Mean Square Error)와 같은 통계지표를 산정하여 모형의 적용성을 검증하였다. 검증 결과 모든 통계지표에서 큰 오차 없이 성공적으로 홍수예측이 모의됨을 확인할 수 있었다. 본 연구결과는 향후 중소하천에서 충분한 선행시간을 확보한 정확도 높은 홍수정보시스템의 구축에 활용할 수 있을 것으로 판단된다.

IPsec VPN 위성통신에서 인증알고리즘이 미치는 영향 분석 (Effect Analysis of a Authentication Algorithm in IPsec VPN Satellite Communication)

  • 정원호;황란미;여봉구;김기홍;박상현;양상운;임정석;김경석
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권5호
    • /
    • pp.147-154
    • /
    • 2015
  • 위성통신망은 방송과 마찬가지로 지구국만 갖추고 있다면 누구나 수신이 가능한 특성을 가져 반드시 보안이 요구되는 내용이 있다면 암호화를 행해 주어야 한다. 본 논문에서는 위성통신망 IPsec VPN에서 전송모드 AH 보안헤더를 추가하여 인증데이터 부분에 인증알고리즘 MD-5와 SHA-256을 적용하여 BER과 Error rate 및 Throughput을 분석하였다. 먼저 일반 IP 패킷을 생성하여 IPsec 전송모드 AH 보안헤더를 추가하여 내부 인증 데이터를 SHA-256 및 MD-5알고리즘을 적용하여 구성하였다. 채널코더는 Rate Compatible Punctured Turbo Codes를 적용하였고, 패킷 재전송 기법은 Hybrid-ARQ Type-II와 Type-III을 사용하였다. 변조방식은 BPSK를 적용하였고, 무선채널은 마르코프 채널 (Rician 80%, Rayleigh 20%와 Rician 90%, Rayleigh 10%)로 위성채널 상태에 따라 인증알고리즘이 에러율과 Throughput에 어떤 영향을 미치는지 분석하였다.

有限要素法을 이용한 海水流動解析 (II) (Analysis of Tidal Flow using the Frequency Domain Finite Element Method (II))

  • 권순국;고덕구;조국광;김준현
    • 한국농공학회지
    • /
    • 제34권2호
    • /
    • pp.73-84
    • /
    • 1992
  • The TIDE, finite element model for the simulation of tidal flow in shallow sea was tested for its applicability at the Saemangeum area. Several pre and post processors were developed to facilitate handling of the complicated and large amount of input and output data for the model developed. Also an operation scheme to run the model and the processors were established. As a result of calibration test using the observed data collected at 9 points within the region, linearlized friction coefficients were adjusted to be ranged 0.0027~0.0072, and water depths below the mean sea level at every nodes were changed to be increased generally by 1 meter. Comparisons of tidal velocities between the observed and the simulated for the 5 stations were made and obtained the result that the average relative error between simulated and observed tidal velocities was 11% for the maximum velocities and 22% for the minimum, and the absolute errors were less than 0.2m/sec. Also it was found that the average R.M.S. error between the velocities of observed and simulated was 0.119 m/sec and the average correlation coefficient was 0.70 showing close agreement. Another comparison test was done to show the result that R.M.S. error between the simulated and the observed tidal elevations at the 4 stations was 0.476m in average and the correlation coefficients were ranged 0.96~0.99. Though the simulated tidal circulation pattern in the region was well agreed with the observed, the simulated tidal velocities and elevations for specific points showed some errors with the observed. It was thought that the errors mainly due to the characteristics of TIDE Model which was developed to solve only with the linearized scheme. Finally it was concluded that, to improve the simulation results by the model, a new attempt to develop a fully nonlinear model as well as further calibration and the more reasonable generation of finite element grid would be needed.

  • PDF