• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.911-914
• /
• 2007

We developed the laser annealing system using green laser of 261W(5kHz) and 75.5mJ/pulse(2kHz). We confirmed that this system makes it possible to form two kinds(large or uniformed grain) of poly-Si by changing its polarized directions. By using ${\mu}-crystal-Si$ as irradiated films, grain size uniformity is better than that using a-Si.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.437-441
• /
• 2008

A non-toxic Post Boost Stage(PBS) with LOX/Ethanol engine was successfully demonstrated at the Tomioka Facility of IHI Aerospace. IHI Aerospace has researched and developed the nontoxic propulsion systems and the LOX/Ethanol is one of the most attractive non-toxic bipropellant candidates. ${\rho}ISP$ of LOX/Ethanol is higher than ${\rho}ISP$ of the other non-toxic bipropellants as LOX/HC or $LOX/LH_2$. The authors studied the combustion characteristics of LOX/Ethanol propellant with the engine designed for LOX/LNG propellant. Also the injector with a built-in igniter was designed and examined its feasibility, ignition and combustion characteristics. We have demonstrated Post Boost Stage with future LOX/Ethanol engines. This propulsion system is targeted for expandable vehicle upper stage to accelerate delta-V to reach the required orbit. PBS Demonstration Model is designed as a test stand to evaluate feed system for integrated propulsion system and also to demonstrate Integrated Vehicle Health Management(IVHM) technique using local valve control and also valve behavior-monitoring capability.

• Health Policy and Management
• /
• v.26 no.2
• /
• pp.107-114
• /
• 2016

Background: Over the last few decades, because hospitals in South Korea also have undergone dramatic changes, Korean hospitals traditionally have provided specialized health care services in the health care market. Inner Herfindahl-Hirschman Index (IHI) measures hospital caseloads based on patient proportions, independent of patient volumes. However, IHI that rely solely on patient proportions might be problematic for larger hospitals that provide a high number of diagnosis categories, as the patient proportions in each category are naturally relatively smaller in such hospitals. Therefore, recently developed novel measure, category medical specialization (CMS) is based on patient volumes as well as patient proportions. Methods: We examine the distribution of hospital specialization score by hospital size and investigate association between each hospital specialization and length of stay per case and hospital cost per case using Korean National Health Insurance Service-cohort sample data from 2002 to 2013. Results: Our results show that IHI show a decreasing trend according to the number of beds and hospital type but CMS show an increasing trend according to the number of beds and hospital type. Further, inpatients admitted at hospitals with higher IHI and CMS had a shorter length of stay per case (IHI: B=-0.104, p<0.0001; CMS: B=-0.044, p=0.001) and inpatients admitted at hospitals with higher IHI and CMS had a shorter hospital cost per case (IHI: B=-0.110, p=0.002; CMS: B=-0.118, p=<0.0001). Conclusion: This study may help hospital policymakers and hospital administrators to understand the effects of hospital specialization strategy on hospital performance under recent changes in the Korean health care environment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.399-402
• /
• 2008

It is well known that helium saturated propellants significantly effects the dynamics of propulsion system, thruster cross coupling, water hammer and thruster performance. Especially for the propulsion systems, which have multiple high thrust engines, such as HTV(H-II transfer vehicle), the effect is more important. Therefore full-saturated propellants should be used at ground tests of HTV propulsion system and evaluate its effects. HTV is an advanced space vehicle being developed by Japan Aerospace Exploration Agency(JAXA) to enhance cargo delivery capabilities of the fleet of vehicles visiting the International Space Station(ISS). This paper presents an overview of the successful effort of the testing with saturated propellants(MMH/MON3) for HTV propulsion system during the ground firing tests.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3338-3355
• /
• 2018

Images acquired by Large Aperture Static Imaging Spectrometer (LASIS) exhibit obvious interference stripes, which are vertical and stationary due to the special imaging principle of interference hyperspectral image (IHI) data. As the special characteristics above will seriously affect the intrinsic structure and sparsity of IHI, decomposition of IHI has drawn considerable attentions of many scientists and lots of efforts have been made. Although some decomposition methods for interference hyperspectral data have been proposed to solve the above problem of interference stripes, too many times of iteration are necessary to get an optimal solution, which will severely affect the efficiency of application. A novel algorithm for decomposition of interference hyperspectral images based on split Bregman iteration is proposed in this paper, compared with other decomposition methods, numerical experiments have proved that the proposed method will be much more efficient and can reduce the times of iteration significantly.

• Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.88-95
• /
• 2015

Recently, fiber composite materials have been attracting attention from industry because of their remarkable material characteristics, including light weight and high stiffness. However, the costs of products composed of fiber materials remain high because of the lack of effective manufacturing and designing technologies. To improve the relevant design technology, this paper proposes a novel simulation method for deforming fiber materials. Specifically, given a 3D model with constant thickness and known fiber orientation, the proposed method simulates the deformation of a model made of thick fiber-material. The method separates a 3D sheet model into two surfaces and then flattens these surfaces into two dimensional planes by a parameterization method with involves cross vector fields. The cross vector fields are generated by propagating the given fiber orientations specified at several important points on the 3D model. Integration of the cross vector fields gives parameterization with low-stretch and low-distortion.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.136-142
• /
• 2008

The influence of different grids on numerical prediction of subsonic compressor performance and stall was investigated. Two types of grids were examined, structured H type grid and structured O-H type grid. Evaluations were conducted by comparing the numerical results with experimental results obtained from a low-speed single-stage rig test for a new concept compressor, called diffuser passage compressor, aiming at improving tip clearance sensitivity. At low mass flow operating conditions, the numerical calculation with O-H type grid showed that the lowest mass flow operating point for which the calculation was able to converge was almost the same as the lowest steady mass flow obtained from the rig test. On the other hand, the numerical calculation with structured H type grid diverged at higher mass flow operating point. It was found that this difference was attributed to the effect of double-valuedness of H type grid that existed at leading edge on the boundary layer development on the blade surface.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.10
• /
• pp.1438-1445
• /
• 2021

A bifunctional glycoside hydrolase GH78 from the ascomycete Xylaria polymorpha (XpoGH78) possesses catalytic versatility towards both glycosides and esters, which may be advantageous for the efficient degradation of the plant cell-wall complex that contains both diverse sugar residues and esterified structures. The contribution of XpoGH78 to the conversion of lignocellulosic materials without any chemical pretreatment to release the water-soluble aromatic fragments, carbohydrates, and methanol was studied. The disintegrating effect of enzymatic lignocellulose treatment can be significantly improved by using different kinds of hydrolases and phenoloxidases. The considerable changes in low (3 kDa), medium (30 kDa), and high (> 200 kDa) aromatic fragments were observed after the treatment with XpoGH78 alone or with this potent cocktail. Synergistic conversion of rape straw also resulted in a release of 17.3 mg of total carbohydrates (e.g., arabinose, galactose, glucose, mannose, xylose) per gram of substrate after incubating for 72 h. Moreover, the treatment of rape straw with XpoGH78 led to a marginal methanol release of approximately 17 ㎍/g and improved to 270 ㎍/g by cooperation with the above accessory enzymes. In the case of beech wood conversion, the combined catalysis by XpoGH78 and laccase caused an effect comparable with that of fungal strain X. polymorpha in woody cultures concerning the liberation of aromatic lignocellulose fragments.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.430-439
• /
• 2010

Inundation of roads by heavy rainfall has attracted more attention than traffic accidents, traffic congestion, and construction because it simultaneously causes travel delays and threatens driver safety. For these reasons, in this paper, we propose an inundation hazard index (IHI) of road links, which shows the possibility of inundation of road links caused by rainfall. To generate the index, we have used two key data sources, namely the digital elevation model (DEM) and past rainfall records of when inundation has occurred. IHI is derived by statistically analyzing the relationships between the normalized relative height of the road links calculated from DEM within the watershed and past rainfall records. After analyzing the practical applicability of the proposed index with a commercial car navigation system through a set of tests, we confirmed that the proposed IHI could be implemented to choose safer routes, with reduced chances of encountering roads having inundation risks.