• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.66-79
• /
• 2006

As constant development of digital broadcasting and data broadcasting system, new technology will be introduced to digital broadcasting and new broadcasting service will be appeared. These services need to be changed and processed to suit each services and the software of the receiver need to be upgraded. Though, generally the digital broadcasting receivers are not getting updated once it's delivered to home for long time and it need to be done by hand or collected each one of them with trouble. Therefore this paper suggests a way to overcome these difficulties via broadcasting stream. This research is to describe how three modules-namely (1) Downloader, downloads new software from data carrousel stream, (2) Update Loader, installs the software received by downloader; and (3) Recoverer, recovers the former version of the software if some serious problem has been occurred during downloading and installing the software. This paper tries to realize the accommodation of terrestrial STB based on the new technique and service following ATSC A-97 agreement.

• Journal of Trauma and Injury
• /
• v.33 no.1
• /
• pp.13-17
• /
• 2020

Purpose: Accurate and appropriate prehospital field triage is essential for a trauma system. The Korean trauma system (established in 2014) uses the trauma field triage algorithm of the United States Centers for Disease Control and Prevention (CDC). This study evaluated the suitability of the CDC field triage criteria for major trauma cases (injury severity score >15) in Korea. Methods: This retrospective cohort study evaluated trauma patients who presented at the authors' regional trauma center from January 1 to May 7, 2017. The undertriage and overtriage rates of each CDC field triage step were calculated. Receiver operating characteristic curves were constructed, and the area under the curve (AUC) was evaluated for each step. Results: Among the 1,009 enrolled patients, 168 (16.7%) had major trauma. The undertriage/overtriage rates of each step (steps I, II, III, and IV) of CDC field triage were 9.2%/47.4%, 6.3%/50.8%, 4.5%/59.4%, and 5.3%/78.9%, respectively. The AUC values of each CDC triage step were 0.722, 0.783, 0.791, and 0.615, respectively. The AUC values of the separate components of each step (physiologic criteria, anatomic criteria, mechanism-of-injury criteria, and special considerations) were 0.722, 0.648, 0.647, and 0.456, respectively. Conclusions: The CDC field triage system is acceptable, but not ideal, for Korean trauma care. If we follow the protocol, it would be preferable to omit step IV. The Korean Triage and Acuity Scale may be a good indicator for in-hospital triage. However, a new triage protocol that is simple to estimate on-scene while having good performance should be developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.409-417
• /
• 2013

Mu-communication board supported by multi-communication is designed with Atxmega 128A1 which is a low power energy consuming of 8-bit microcontroller. ATxmega128A1 microcontroller consists of 8 UART(Universal asynchronous receiver/transmitter) ports which can be setting appropriate user interface having command line interpreter(CLI) program with each port, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. 8 URAT ports are used for the multi communication modem, GPS module, etc. and EEPROM is used for saving a configuration for program running, and flash memory of 128 kbytes is used for storing a Firm Ware, and 8 kbytes SRAM is used for stack, storing memory of global variables while program running. If we uses the hybrid communication of path optimization of VHF, TRS and CDMA to remote control AtoN(aid to navigation), it is able to remove the communication shadow area. Even though there is a shadow area for individual communication method, we can select an optimum communication method. The compatibility of data has been enhanced as using of same data frame per communication devices. For the test, 8640 of data has been collected from the each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 99.4 %.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3389-3395
• /
• 2014

Conventional methods, such as the clock time control method and temperature difference control method, for defrost control often encounter mal-defrost and a waste of energy. Therefore, a more efficient method is needed to control defrosting precisely. A photoelectric sensor unit consisting of an emitter and a collector was installed in the front of outdoor heat exchanger. Accurate defrost control was performed by monitoring and using the change in output voltage according to the presence of frost. In this study, experiments were performed to determine if the performance and characteristic curves obtained using the clock time control method can be reproduced using a photoelectric sensor under the heating and defrosting capacity test condition described at KS C 9306. The output voltage of the phototransistor (receiver) and heating capacity, power consumption, and surface temperature of the outdoor heat exchanger, were compared. The results showed that photoelectric sensors can be used as a defrost control method. On-off control timing of the clock time defrosting method was in good agreement with those predicted by the output voltage of the photoelectric sensor.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.475-480
• /
• 2012

In order to establish eLoran (enhanced Long Range Navigation) system, it needs the advancement of receiver, transmitter, data channel addition for Loran information, differential Loran sites for compensating Loran-c signal and ASFs (Additional Secondary Factors) database, etc. In addition, the precise synchronization of transmitting station to the UTC (Coordinated Universal Time) is essential if Loran delivers the high absolute accuracy of navigation demanded for maritime harbor entrance. For better timing synchronization to the UTC among transmitting stations, it is necessary to measure and monitor the transmission delay of the station, and the correction information of the transmitting station should be provided to the user's receivers. In this paper we presented the measurement method of absolute delay of Pohang Loran transmitting station and developed a time delay measurement system and a phase monitoring system for Loran station. We achieved -2.23 us as a result of the absolute phase delay of Pohang station and the drift of Loran pulse of the station was measured about 0.3 us for a month period. Therefore it is necessary to measure the delay offset of transmitting station and to compensate the drift of the Loran signal for the high accuracy application of PNT (Positioning, Navigation and Timing).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.154-167
• /
• 2006

Today's IEEE 802.11 WLANs(Wireless LANs) provide multiple transmission rates so that different rates can be exploited in an adaptive manner depending on the underlying channel condition in order to maximize the system performance. Many rate adaptation schemes have been proposed so far while most(if not all) of the commercial devices implement a simple open-loop rate adaptation scheme(i.e., without feedback from the receiver), called ARF(Automatic Rate Fallback) due to its simplicity. A key problem with such open-loop rate adaptation schemes is that they do not consider the collision effect, and hence, malfunction severely when many transmission failures are due to collisions. In this paper, we propose a novel rate-adaptation scheme, called CARA(Collision-Aware Rate Adaptation). The key idea of CARA is that the transmitter station combines adaptively the Request-to-Send/Clear-to-Send(RTS/CTS) exchange with the Clear Channel Assessment(CCA) functionality to differentiate frame collisions from frame transmission failures cause by channel errors. Therefore, compared with other open-loop rate adaptation schemes, CATA is more likely to make the correct rate adaptation decisions. Through extensive simulation runs, we evaluate our proposed scheme to show that our scheme yields significantly higher throughput performance than the existing schemes in both static and time-varying fading channel environments.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.19-34
• /
• 2018

The purpose of this study is to estimate monthly agricultural reservoir storage with multiple linear regression model(MLRM) based on reservoir storage and meteorological data. The regression model was developed using 15 years(2002 to 2016) of 3,067 reservoirs by KRC(Korea Rural Community) and 63 meteorological stations by KMA (Korean Meteorological Administration), and the MLRM showed the determination coefficient($R^2$) of 0.51~0.95. The MLRM was applied to 9 selected reservoirs among the whole reservoirs and validated with $R^2$ of 0.44~0.81. The ROC(Receiver Operating Characteristics) analysis of Reservoir Drought Index(RDI) classified by comparing the present reservoir storage with normal year(1976~2005 average) reservoir storage showed average value of 0.64 for 2 years(2015~2016) with the highest value of 0.70 for winter period, lowest value of 0.58 for summer period. If 1 to 3 months weather forecasting data such as Glosea5 produced by KMA are applied, the predicted monthly reservoir storage from the MLRM can be a useful information for agricultural drought pre-preparation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.182-187
• /
• 2010

In the various fields of Civil Engineering, shear modulus is very important input parameters to design many constructions and to analyze ground behaviors. In general, a shear wave velocity profile is decided by various experiments before constructing a structure and, analysis and design are carried out by using decided shear wave velocity profile of the site. However, if civil structures are started to construct, the shear wave velocity will be increased more than before constructions because of confining pressure increase by the load of structure. The evaluation of the change in shear wave velocity profile is used very importantly when maintaining, managing, reinforcing and regenerating existing structures. In this study, a non-destructively geotechnical investigation method by using the HWAW method is applied to an evaluation of change in properties of the site according to construction. Generally, the space for experiments is narrow when underground of existing or on-going structures is evaluate, so a prompt non-destructive experiment is required. This prompt non-destructive experiment would be performed by various in-situ seismic methods. However, most of in-situ seismic methods need more space for experiments, so it is difficult to be applied. The HWAW method using the Harmonic wavelet transforms, which is based on time-frequency analysis, determines shear wave velocity profile. It consists of a source as well as short receiver spacing that is 1~3m, and is able to determine a shear wave velocity profile from surface to deep depth by one test on a space. As the HWAW method uses only the signal portion of the maximum local signal/noise ratio to determine a profile, it provides reliability shear modulus profile such as under construction or noisy situation by minimizing effects of noise from diverse vibration on a construction site or urban area. To estimate the applicability of the proposed method, field tests were performed in the change of geotechnical properties according to constructing a minimized modeling bent. Through this study, the change of geotechnical properties of the site was effectively evaluated according to construction of a structure.

• Korean Journal of Social Welfare
• /
• v.66 no.3
• /
• pp.209-230
• /
• 2014

The study is to show the prevalence of double-care burdened households who care simultaneously for children(under 6) and provide invalid elderly care for aging parents among women aged 30s to 40s in Korea. The study aims to place care as ordinary needs for our whole lifetime, not as a special happening to a certain age group at specific period. Also, study attempts to reveal that care experiences include both burden and pleasure, and that care relationship, such as care giver-receiver-assistants(second-helpers), strongly affects the diversity of caring experience. Results are as follows. 38.1% of the survey respondents report that they are/have ever been the double-care burdened households who carry both child care under 6 and elderly care suffering from health problems in the past or the present. If including those who expecting the double burden of care in the near future, the prevalence rate goes up to 54.9%. As hypothesized, caring includes both pleasure and burden. The order of pleasant feelings is child care> parents care>in-law parents care, and that of burden is in reverse. However, caring relationship has a strong influence on pleasure or agony of the caring experience. The association between the relationship and the experience, which is expressed by pleasure or pain, occurs to both daughter-parents and in-laws. Interestingly, the caring experiences by daughter to her parents tend to go more burdensome because their husbands do not commit their identity as carer aid, with no additional caring effort for their in-laws. In conclusion, some policy suggestions for double care problems are provided.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1082-1091
• /
• 2000

In this paper, the efficient equalization method for OFDM(Orthogonal Frequency Division Multiflexing) System using the QAM(Quadrature Amplitude Modulation) in multipath fading channel is proposed in order to faster and more efficiently equalize the received signals that are sent over real channel. In generally, the one-tap linear equalizers have been used in the frequency-domain as the existing equalization method for OFDM system. In this technique, if characteristics of the channel are changed fast, the one-tap linear equalizers cannot compensate for the distortion due to time variant multipath channels. Therefore, in this paper, we use one-tap non-linear equalizers instead of using one-tap linear equalizers in the frequency-domain, and also use the linear equalizer in the time-domain to compensate the rapid performance reduction at the low SNR(Signal-to-Noise Ratio) that is the disadvantage of the non-linear equalizer. In the frequency-domain, when QAM signals, consisting of in-phase components and quadrature (out-phase) components, are sent over the complex channel, the only in-phase and quadrature components of signals distorted by the multipath fading are changed the same as signals distorted by the noise. So the cross components are canceled in the frequency-domain equalizer. The time-domain equalizer and the adaptive algorithm that has lower-error probability and fast convergence speed are applied to compensate for the error that is caused by canceling the cross components in the frequency-domain equalizer. In the time-domain, To compensate for the performance of frequency-domain equalizer the time-domain equalizes the distorted signals at a frame by using the Gold-code as a training sequence in the receiver after the Gold-codes are inserted into the guard signal in the transmitter. By using the proposed equalization method, we can achieve faster and more efficient equalization method that has the reduced computational complexity and improved performance.