• 천문학논총
• /
• 제22권3호
• /
• pp.83-87
• /
• 2007

We designed the Intermediate Frequency(IF) distributor for multi beam backend system and manufactured Voltage to Frequency Converter(VFC) to measure the multi-beam receiver performance. Multi beam receiver has 15 channel receivers and can get 15 spectrums at once. The multi beam receiver has more observation efficiency than single beam receiver. We manufactured the 15 IF distributors to distribute IF signal for Autocorrelation spectrometer that is radio signal processor. Also, we manufactured the VF Converter to test the performance measurement of receiver for Korea VLBI Network(KVN) system which is under-construct in Seoul, Ulsan and Jeju. As a result of performance measurement, we could obtain linearity of 99.4% on the input power vs output frequency and measured the operating range of input frequency.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.211-215
• /
• 2006

In this paper, design and applications of a generalized, versatile and customizable IF signal generator that can model the modernized GPS and Galileo signal is given. It generates IF sampled data that can be directly used by a software receiver. Entire constellation of satellites which is independent of satellite-user geometry is easily determined using a real or simulated ephemeris data. Since the IF center frequency, sampling frequency and quantization bit number are user location dependent parameters, their effects are also considered in IF signal generator. The generalized IF signal generator will be very well suited for the development phase of a software receiver due to its versatility. The full access to the sampling frequency, front-end filter definition and ADC parameters also offers a great opportunity for cost-effective analysis of tracking loops and error mitigation techniques at the receiver level. Interference sources can be easily added to the generator to simulate specific environments. This software IF signal generator can also be used to feed a multi-frequency multi-system software receiver for the prototyping of a combined GPS/Galileo receiver. The test result using the generated signals and a real software receiver shows the effectiveness of the implemented IF signal generator.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.16-20
• /
• 2002

This paper describes the resistive FET mixer with low IF for the 4-Ch DBF(Digital Beam Forming) receiver with LNA(Low Noise Amplifier). This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 2.09 ㎓, 2.08 ㎓ and 10㎒, respectively. The RF input power, LO input power and Vgs are used -10㏈m, 6㏈m and -0.4 V, respectively. In the 4-Ch resistive FET mixer with LNA, the measured IF and harmonic components of 10㎒, 20㎒, 2.09㎓ and 4.17㎓ are about -12.5 ㏈m, -57㏈m, -40㏈m and -54㏈m, respectively. The IF output power observed at each channel of 10㎒ is about -12.5㏈m and it is higher 27.5 ㏈m than the maximum harmonic component of 2.09㎓. Each IF output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.76-83
• /
• 2008

A low power(9 mW) highly-digitized 2.4 GHz receiver for sensor network applications(IEEE 802.15.4 LR-WPAN) is realized by a $0.18{\mu}m$ CMOS process. We adopted a novel receiver architecture adding an intermediate frequency (IF) level detection scheme to a low-power complex fifth-order continuous-time(CT) bandpass L:tl modulator in order to digitalize the receiver. By the continuous-time bandpass architecture, the proposed $\Sigma\Delta$ modulator requires no additional anti-aliasing filter in front of the modulator. Using the IF detector, the achieved dynamic range(DR) of the over-all system is 95 dB at a sampling rate of 64 MHz. This modulator has a bandwidth of 2 MHz centered at 2 MHz. The power consumption of this receiver is 9.0 mW with a 1.8 V power supply.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1073-1080
• /
• 2008

A GPS receiver platform has been developed to design an interference rejection filter and the platform is also able to evaluate performance of those filters. This platform consists of RF/IF part, data acquisition part and PC part. The RF/IF part converts RF signals to IF signals, the data acquisition part transmits the IF signals to PC using USB device. The PC part rejects the interferences with a filter and then it does navigation with GPS software receiver. The RF/IF part and data acquisition part had been validated with signal spectrum, and the PC part had been validated with the navigation results of GPS receiver. Finally, the entire platform including interference rejection filter has been confirmed with the navigation results in case that the GPS signals and interference entered this platform. As a result, the GPS receiver operated well against interference with 45dB JSR.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.117-123
• /
• 2002

This paper describes the design for the resistive FET mixer with low If for the 4-Ch DBF(Digital Beam Forming) receiver This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(If) considered in this research are 2.09 GHz, 2.08 CHz and 10 MHz, respectively. This mixer is composed of band pass filter, a low pass filter and a DC bias circuit. Super low noise HJ FET of NE3210S01 is considered in design. The RE input power, LO input power and Vcs are used -10 dBm, 6 dBm and -0.4 V, respectively. In the 4-Ch resistive FET mixer, the measured If and harmonic components of 10 MHe, 20 MHz and 2.087 CHz are about -19.2 dBm, -66 dBm and -48 dBm, respectively The If output power observed at each channel of 10 MHz is about -19.2 dBm and it is higher 28.8 dBm than the maximum harmonic component of 2.087 CHz. Each If output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.803-815
• /
• 2016

이 논문에서는 GNSS(global navigation satellite system) 신호를 RF(radio frequency) 대역에서 표본화하여 디지털 영역에서 복조하는 직접 RF 표본화 수신기를 설계하고 그 성능을 살펴보고자 한다. 직접 RF 표본화 방식은 IF(intermediate frequency) 대역에서 AD(analog to digital) 변환을 하고 복조하는 기존의 IF 변환 방식과 다르게, 아날로그 믹서(mixer)를 전혀 사용하지 않고 안테나 출력인 통과대역 신호를 직접 AD 변환하여 이후의 수신기의 모든 과정을 디지털 영역에서 처리하는 기술이다. IF 변환 방식과 비교하면 하드웨어 구조가 덜 복잡하고 전송환경 변화에 따른 재구성이 가능하며 하나의 AD 변환기를 사용하여 여러 대역의 신호를 동시에 변환할 수 있다는 장점이 있다. 이와 같은 재구성 기능과 동시 수신 기능은 특정 대역의 신호가 적으로부터 전파방해를 받았을 때 후속시스템으로의 빠른 전환이 필요한 군용 시스템에서 매우 중요한 역할을 한다. 한편 여러 대역의 신호를 한 번에 AD 변환하려면 수신하고자 하는 신호의 반송파 주파수, 대역폭, 표본화 후의 중간주파수 그리고 보호 대역 등을 고려하여 표본화 주파수를 정하는 것이 중요하다. 이 논문에서는 GPS L1, GLONASS G1 및 G2 등의 GNSS 신호를 동시에 수신할 수 있는 표본화 주파수를 선택하고 이를 적용한 직접 RF 표본화 수신기를 설계한다. 또한 설계한 수신기를 상용 AD 변환기와 소프트웨어를 사용하여 구현한 후 실제 신호의 수신시험을 통해 수신 성능을 살펴본다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.219-223
• /
• 2003

This paper describes an estimation of DOA(Direction Of Arrival) measurement system using DBF receiver with linear array antenna. This DBF receiver is composed of resistive FET mixer using low IF mettled. A radio frequency(RF), a local oscillator(LO) and ail intermediate frequency(IF) considered in this research are 2.09 GHz, 2.08 GHz and 10 MHz, respectively. This receiver is composed of a band-pass filter, a low-pass filter, a DC bias circuit. DOA measurement system is consist of linear array antenna, DBF receiver, AD control box and computer in the anechoic chamber. Receiving antenna is 4-array monopole antenna and DBF receiver is 4-Ch resistive FET mixer without amplifier. DOA algorithm is implemented using MUSIC algorithm with high resolution. We show that the results of DOA is $-30^{\circ},\;0^{\circ}$ and $60^{\circ}$, respectively. And we know that DOA estimation error occur by antenna radiation pattern and fabrication error of antenna array.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.143-149
• /
• 2004

This paper describes characteristics of the single-balanced low IF resistive FET mixer for the digital beam forming(DBF) receiver. This DBF receiver based on the direct conversion method is designed with Low IF I and Q channel. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 1950 MHz, 1940 MHz and 10 MHz, respectively. Super low noise HJ FET of NE3210S01 is considered in design. The measured results of the proposed mixer are observed IF output power of -22.8 dBm without spurious signal at 10 MHz, conversion loss of -12.8 dB, isolation characteristics of -20 dB below, 1 dB gain compression point(PldB) of -3.9 dBm, input third order intercept point(IIP3) of 20 dBm, output third order intercept point(OIP3) of 4 dBm and dynamic range of 30 dBm. The proposed mixer has 1.0 dB higher IIP3 than previously published single-balanced resistive and GaAs FET mixers, and has 3.0 dB higher IIP3 and 4.3 dB higher PldB than CMOS mixers. This mixer was fabricated on 0.7874 mm thick microstrip $substrate(\varepsilon_r=2.5)$ and the total size is $123.1\;mm\times107.6\;mm$.

• 한국전자파학회논문지
• /
• 제17권8호
• /
• pp.767-772
• /
• 2006

레이다 기술의 국산화가 이슈가 되고 연구 개발에 박차를 가하고 있는 가운데 본 논문의 Dual-band 모노 펄스 수신기는 추적 레이다를 기반으로 한 실험적 수행 결과를 바탕으로 하고 있다. Dual-band 레이다를 Single-band 레이다와 비교해 보면 높은 비용과 소비 전력 등의 단점을 갖고 있지만 재밍이나 검파 거리, 이미지 신호 제거, 강우 감쇄 특성 면에서 이점을 가질 수 있다. 수신기는 X-band RF head 모듈, Ka-band RF head 모듈, 그리고 공통 IF모듈로 구성되며 X-band와 Ka-band의 각 신호는 IF 모듈의 스위칭에 의해 선택되어진다. 또한 IF모듈의 국부 신호단에서는 위상 제어기가 장착되어 합 채널을 기준으로 고각과 방위각 채널의 위상을 제어할 수 있도록 하였다. 측정 결과 전체 이득은 $40{\pm}3 dB$였으며, 송신/수신간 격리도는 39 dBc, 동적 영역 110 dB, 그리고 잡음지수는 X/Ka-band 각각 4.5dB/6.9dB로 나타났다.