• 제목/요약/키워드: IF

검색결과 49,141건 처리시간 0.072초

돼지의 대동맥 판막 및 심낭에서 녹색콩 알파-갈락토시다아제를 이용한 알파-갈 항원결정인자 제거 (Removal of ${\alpha}$-Gal Epitopes in Aortic Valve and Pericardium of Pig Using Green Coffee Bean ${\alpha}$-Galactosidase)

  • 박성식;김웅한;김경환;이창하;최선영;이철;오삼세;김관창;김용진
    • Journal of Chest Surgery
    • /
    • 제41권1호
    • /
    • pp.12-24
    • /
    • 2008
  • 배경: 최근 조직판막의 구조적 손상에 있어서 동물면역 반응이 중요한 역할을 할 가능성이 제기되면서 동물의 대표적 이종항원 물질인 알파-갈 항원결정인자에 대한 환자의 면역반응에 관한 관심이 높아지고 있다. 또한 알파-갈은 세포 표면에 존재하며 이는 녹색콩 알파-갈락토시다아제 라는 효소를 이용하여 제거할 수 있다고 알려져 있고 조직 표면의 알파-갈 항원결정인자는 Griffonia Simplicifolia의 동종렉틴 중 B4타입에 선택적으로 결합하여 이를 이용해서 염색할 수 있다고 알려져 있다. 이에 본 연구팀은 조직판막을 만드는데 많이 사용되는 돼지의 대동맥 판막 및 심낭 조직을 가지고 녹색콩알파-갈락토시다아제를 이용하여 이들 조직의 알파-갈 항원결정인자를 제거할 수 있는지 알아 보고자하였다. 대상 및 방법: 신선한 돼지의 대동맥 판막 및 심낭 조직을 0.5 unit/mL, 1.0 unit/mL, 2.0 unit/mL 농도의 녹색콩 알파-갈락토시다아제로 pH 6.5, $4^{\circ}C$에서 24시간 처리한 뒤 이를 Griffonia Simplicifolia 동종렉틴 B4 타입을 이용한 면역조직형광염색으로 염색하여, 각각의 농도에서 효소 반응 후 해당 조직의 알파-갈 항원결정인자가 얼마나 제거되는지를 형광염색의 정도로 판단하였다. 결과: 돼지의 대동맥 판막 조직의 경우 1.0 unit/mL농도의 녹색콩 알파-갈락토시다아제를 pH 6.5, $4^{\circ}C$ 에서 24시간 처리하였을 때 형광염색이 거의 되지 않을 정도로 알파-갈 항원결정인자가 제거되었고 이는 효소의 농도를 2.0 unit/mL로 증가시켰을 때에도 비슷한 양상을 보였다. 돼지의 심낭 조직의 경우 효소 처리 전의 알파-갈 염색에서도 대동맥 판막조직에 비하여 많은 양의 형광염색을 보였으며 효소 처리의 농도도 대동맥 판막의 경우보다 높은 2.0 unit/mL의 농도에서 알파-갈 항원결정인자가 제거되는 양상을 보였다. 걸론: 돼지의 대동맥 판막 조직과 심낭 조직의 알파-갈 항원결정인자는 eriffonia simplicifolia의 동종렉틴 B4를 사용한 면역조직형광염색에서 잘 염색되었으며 이를 알파-갈락토시다아제를 사용하여 제거하였을 때 각각 1.0 unit/mL, 2.0 unit/mL 농도의 녹색콩 알파-갈락토시다아제를 $4^{\circ}C$, pH 6.5의 조건에서 24시간 반응시켰을 때 효과적으로 상당량 제거할 수 있었다. 향후 돼지의 판막조직 및 심낭조직으로 만드는 조직판막의 내구성 증대에 대표적인 동물 면역항원인 알파-갈 항원결정인자의 제거가 유용한 도구가 될 수 있을 것이며 앞으로 알파-갈락토시다아제로 처리한 돼지의 조직판막에 대한 인간혈장의 항-갈 항체 및 항-갈 단클론항체를 이용한 직접적인 면역학적 연구가 필요하다.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

트랜잭션 가중치 기반의 빈발 아이템셋 마이닝 기법의 성능분석 (Performance analysis of Frequent Itemset Mining Technique based on Transaction Weight Constraints)

  • 윤은일;편광범
    • 인터넷정보학회논문지
    • /
    • 제16권1호
    • /
    • pp.67-74
    • /
    • 2015
  • 최근, 아이템들의 가치를 고려한 빈발 아이템셋 마이닝 방법은 데이터 마이닝 분야에서 가장 중요한 이슈 중 하나로 활발히 연구되어왔다. 아이템들의 가치를 고려한 마이닝 기법들은 적용 방법에 따라 크게 가중화 빈발 아이템셋 마이닝, 트랜잭션 가중치 기반의 빈발 아이템셋 마이닝, 유틸리티 아이템셋 마이닝으로 구분된다. 본 논문에서는 트랜잭션 가중치 기반의 빈발 아이템셋 마이닝들에 대해 실증적인 분석을 수행한다. 일반적으로 트랜잭션 가중치 기반의 빈발 아이템셋 마이닝 기법들은 데이터베이스 내 아이템들의 가치를 고려함으로써 트랜잭션 가중치를 계산한다. 또한, 그 기법들은 계산된 각 트랜잭션의 가중치를 바탕으로 가중화 빈발 아이템셋들을 마이닝 한다. 트랜잭션 가중치는 트랜잭션 내에 높은 가치의 아이템이 많이 포함 될수록 높은 값으로 나타나기 때문에 우리는 각 트랜잭션의 가중치의 분석을 통해 그 가치를 파악할 수 있다. 우리는 트랜잭션 가중치 기반의 빈발 아이템셋 마이닝 기법 중에서 가장 유명한 알고리즘인 WIS와 WIT-FWIs, IT-FWIs-MODIFY, WIT-FWIs-DIFF의 장 단점을 분석하고 각각의 성능을 비교한다. WIS는 트랜잭션 가중치 기반의 빈발 아이템셋 마이닝의 개념과 그 기법이 처음 제안된 알고리즘이며, 전통적인 빈발 아이템셋 마이닝 기법인 Apriori를 기반으로 하고 있다. 또 다른 트랜잭션 가중치 기반의 빈발 아이템셋 마이닝 방법인 WIT-FWIs와 WIT-FWIs-MODIFY, WIT-FWIs-DIFF는 가중화된 빈발 아이템셋 마이닝을 더 효율적으로 수행하기 위해 격자구조(Lattice) 형태의 특별한 저장구조인 WIT-tree를 이용한다. WIT-tree의 각 노드에는 아이템셋 정보와 아이템셋이 포함된 트랜잭션의 ID들이 저장되며, 이 구조를 사용함으로써 아이템셋 마이닝 과정에서 발생되는 다수의 데이터베이스 스캔 과정이 감소된다. 특히, 전통적인 알고리즘들이 수많은 데이터베이스 스캔을 수행하는 반면에, 이 알고리즘들은 WIT-tree를 이용해 데이터베이스를 오직 한번만 읽음으로써 마이닝과정에서 발생 가능한 오버헤드 문제를 해결한다. 또한, 공통적으로 길이 N의 두 아이템셋을 이용해 길이 N+1의 새로운 아이템셋을 생성한다. 먼저, WIT-FWIs는 각 아이템셋이 동시에 발생되는 트랜잭션들의 정보를 활용하는 것이 특징이다. WIT-FWIs-MODIFY는 조합되는 아이템셋의 정보를 이용해 빈도수 계산에 필요한 연산을 줄인 알고리즘이다. WIT-FWIs-DIFF는 두 아이템셋 중 하나만 발생한 트랜잭션의 정보를 이용한다. 우리는 다양한 실험환경에서 각 알고리즘의 성능을 비교분석하기 위해 각 트랜잭션의 형태가 유사한 dense 데이터와 각 트랜잭션의 구성이 서로 다른 sparse 데이터를 이용해 마이닝 시간과 최대 메모리 사용량을 평가한다. 또한, 각 알고리즘의 안정성을 평가하기 위한 확장성 테스트를 수행한다. 결과적으로, dense 데이터에서는 WIT-FWIs와 WIT-FWIs-MODIFY가 다른 알고리즘들보다 좋은 성능을 보이고 sparse 데이터에서는 WIT-FWI-DIFF가 가장 좋은 효율성을 갖는다. WIS는 더 많은 연산을 수행하는 알고리즘을 기반으로 했기 때문에 평균적으로 가장 낮은 성능을 보인다.

시카고협약체계에서의 항공안전평가제도에 관한 연구 (A Study on Air Operator Certification and Safety Oversight Audit Program in light of the Convention on International Civil Aviation)

  • 이구희;박원화
    • 항공우주정책ㆍ법학회지
    • /
    • 제28권1호
    • /
    • pp.115-157
    • /
    • 2013
  • 시카고협약 일부 체약국은 자국 항공사에게 AOC(AOC and Operations Specifications)을 승인하여 발행하는 것 이외에 외국 항공사에게도 FAOC(Foreign AOC and Operations Specifications)을 발행하고 있으며 다양한 항공안전평가도 실시하고 있다. 외국 항공사에게 FAOC 승인 발행 및 항공안전평가 실시는 점차 확대되고 있는 추세로 전 세계적으로 항공안전 증진 및 항공기 사고율 감소에 기여한 공로가 크다고 볼 수 있으나, 한편으로는 승인 및 지적사항에 대한 적법성 논란 및 행정 편의를 표방하는 대표적 사례라는 지탄과 함께 감독 당국의 업무수행 능력 차이로 인하여 항공기 운항 상 불편이 초래되고 있다. 항공기 사고방지 및 효율적인 항공기 운항을 위하여 항공 안전 확보는 가장 중요한 요소 중의 하나로 타협할 수 있는 사항이 아니며, 따라서 국제항공사회는 ICAO에서 시카고협약부속서 19 Safety Management를 별도로 제정하여 2013년 말부터 적용하도록 하였다. 국제 항공 질서 확립 및 항공 안전 확보를 위하여 시카고협약 및 부속서는 체약국의 의무 및 '국제표준 및 권고방식(SARPs, Standards and Recommended Practices)'을 규정하고 있으며 각 체약국은 SARPs에 합당한 이행의무를 준수해야 한다. 이와 관련하여 각 체약국은 항공사의 안전운항체계를 확인하고 AOC를 승인하여 발행하며 지속적으로 관리감독 업무를 수행하고 있다. 이러한 AOC 승인 발행에 대한 ICAO 국제 표준은 체약국의 항공당국이 자국의 항공사를 대상으로 허가 및 교부하는 것으로 체약국을 운항하는 외국의 항공사에게까지 발급하도록 규정하고 있지 않으나 미국, 중국, 호주, 뉴질랜드, 몽골 등 일부 체약국은 자국 내 항공사에게 AOC 발행 뿐 아니라 외국의 항공사에게도 AOC(FAOC)를 인가하여 교부하고 있으며 이는 EASA 등으로 확대되고 있는 실정이다. AOC나 FAOC 이외에도 ICAO와 IATA는 항공당국 및 항공사 전반에 대한 항공안전평가가 있으며, 미국 및 유럽도 자국 및 회원국 등을 운항하는 외국 항공 당국 및 항공사에 대한 항공안전평가를 별도로 실시하고 그 평가 결과를 공표하면서 항공 안전 불합격으로 평가된 국가나 항공사에게는 운항 제한 등 불이익을 주고 있다. 이와 관련하여 본 논문에서는 AOC, FAOC 및 항공안전평가제도의 법적 근거 및 동향을 고찰하고 조종사비행기록부 탑재여부 등에 대한 국제 사례연구를 통하여 몇 가지 제언과 개선방안을 제시하였다. 본 논문이 현 제도의 미흡한 부분을 보완하고 불합리한 제한기준이 개선되는데 도움을 주고, 아울러 국제 표준 준수 및 항공안전 발전에 기여하길 기대한다. 항공법규 관련 합리적인 기준 수립 및 이행에 있어 가장 중요한 요소 중 하나는 시카고협약 및 SARPs에 대한 철저한 이해가 선행되어야 한다는 것이다. 법규 제정자, 연구기관, 전문가, 운영자 등 모든 관계자들의 긴밀한 협조 하에 기준 수립이 이루어질 때 항공법규 수립 및 이행에 대한 보다 실질적인 개선 및 질적 향상을 기대할 수 있을 것이다.

  • PDF

협착성 기관지 결핵의 풍선카테타요법(II) (Balloon dilatation for bronchial stenosis in Endobronchial Tuberculosis)

  • 온준상;이영실;윤상원;손형대;김창선;서지영;박미란;유남수;조동일;곽병국
    • Tuberculosis and Respiratory Diseases
    • /
    • 제43권5호
    • /
    • pp.701-708
    • /
    • 1996
  • 연구 목적: 13명의 기관지 결핵에 의한 주기관지 협착 환자의 치료에 있어서 풍선카테터를 이용한 기도확장요법을 시행하고 그 효과를 알아보았다. 대상 및 방법: 방사선 투시 하에 풍선 카테터를 이용, 기관지 확장술을 받은 사람은 13명 모두 여자였고, 평균 31.1세였다. 협착부위는 좌측 주기관지 9예(69.2%), 우측 주기관지 4예(30.8%)였으며, 활동성 병기의 기관지 결핵은 9예(69.2%), 비활동성 병기는 4예(30.8%)였다. 시술 후 7일, 1-28개월(평균 15.6개월)까지 폐기능 검사로 추적관찰하였고, 효과 판정은 폐기능 검사로 FEV1이나, FVC가 시술 전보다 15%이상 증가된 경우를 효과가 있다고 판정하였다. 또한 13예 모두에서 술후 합병증 여부를 알아보았다. 결과: 1) 시술 후 환자 자신이 귀로 들을 수 있는 천명음이 8예 중 6예에서 호전되었으며(75%), 8예중 5예에서 호흡곤란이 호전되었고(62.5%), 기침 및 객담이 6예중 3 예(50%)에서, 흉부 불쾌감 및 통증이 2예중 1예(50%)에서 호전되었다. 2) 시술 전까지 환자의 호흡기 증상의 발현 기간이 6개월 미만인 7예 중 3 예(42.9%), 1년 미만인 1예 중 1예(100%)에서 효과가 있는 반면, 1년이상인 5예 중 단지 1예(20%)에서만 효과가 있었다. 3) 활동성 병기인 9예 중 4예(44.4%)에서 효과가 있었으나, 비활동성 병기인 4예에서는 단지 1예(25%)에서만 효과가 있었다. 4) 시술 후 7 일째 8예(61.5%)에서 FVC가 35.5%, FEV1이 22.2% 증가하였고, 1개월 이후에는 8 예 중 5 예에서 FEV1이 31.8%, FVC가 54.7% 증가하였으며 3예에서는 악화되었다. 5예 중 12개월 이상(평균 19.8개월) 추적 가능했던 4 예에서 FEV1이 10.1%, FVC가 30.5% 증가되었다. 5) 시술 후 13예 중 4예(30.8%)에서 일시적 백혈구 증가, 혹은 발열이 있었고, 4예(30.8%)에서 카테터 제거시 혈당이 묻어 나왔으나 지속적인 혈담은 없었고, 중증 합병증은 관찰되지 않았다. 결론: 풍선 카테터를 이용한 기도확장요법은 이미 섬유성 협착이 발생한 비활동성 기관지 결핵보다도 활동성 병기에서, 그리고 호흡기 증상이 오래되지 않은 경우에 더 효과적이었고, 단기 뿐 아니라 장기 추적 검사에서도 효과가 유지되었다. 또한 시술 방법이 비교적 쉽고 중증 합병증 없이 비교적 안전하게 반복적으로 시술할 수 있으므로 결핵성 기관지 협착을 조기에 진단하고 약물 치료로 호전이 없는 경우에 일차적으로 기도확장요법을 시행함으로서 기도 협착을 최소화할 수 있으리라 사료된다.

  • PDF

세기조절방사선치료를 시행받은 두경부암 환자군에서 구강건조증지표 분석 (Evaluation of Xerostomia Following Intensity Modulated Radiotherapy (IMRT) for Head and Neck Cancer Patients)

  • 이석호;김태현;지의규;임현선;임은실;류준선;정유석;박성용;김주영;표흥렬;신경환;김대용;조관호
    • Radiation Oncology Journal
    • /
    • 제22권2호
    • /
    • pp.106-114
    • /
    • 2004
  • 목적 : 세기조절방사선치료(IMRT)를 시행받은 두경부암 환자군에서 구강건조증 지표들을 측정시점별로 비교분석 하고 이 지표들과 이하선에 조사된 방사선량과의 연관성을 분석하고자 하였다. 대상 및 방법 : 2003년 2월부터 10월까지 두경부암으로 IMRT를 시행받은 13명을 대상으로 하였다. IMRT군의 연령은 43$\~$77세(중앙값 57세)이었고, 구강건조증을 평가하는 주관적 지표로서 4항목으로 구성된 구강지표점수(xerostomia questionnaire score: XQS)와 객관적 지표로서 자극유무에 따른 saliva의 분비량(unstimulated & stimulated salivary flow rate: USFR & SSFR)을 측정하였고, 주관적 그리고 객관적 통합지표로서 LENT SOMA scale(LSC)을 측정하였다. 측정시점은 치료 전, 치료 후 1개월, 3개월이었다. IMRT군 내에서 전체 환자군과 전체이하선에 조사된 평균방사선량을 기준으로 나눈 두 군에서의 측정시점에 따른 지표들 간 변화유무를 보았고, 나아가, 구강건조증지표들과 타액분비량 간의 상관관계를 분석하였다. 결과: IMRT군 전체13명 내에서 치료 전과 치료 후 1개월, 3개월에 측정된 XQS, LSC, USFR & SSFR은 유의한 변화가 없어 구강건조증의 발현이 관찰되지 않았다. 전체이하선에 조사된 평균선량 3,500 cGy를 기준으로 환자군을 나누어 보았을 때, 3,500 cGy 미만 조사받은 8명의 환자군에서는 유의한 변화가 없었으나 3,500 cOy이상 조사받은 5명의 환자군에서는 XQS, LSC, SSFR그리고 USFR이 유의하게 증가되어 구강건조증의 발현이 관찰되었다. 또한, 각 지표들과 타액분비량 간의 상관관계를 보았을 때, 치료 후 1개월째에서 유의한 상관관계를 보이지 않았으나, 치료 후 3개월째에서 XQS, LSC가 커질수록 USFR, SSFR이 감소하는 유의한 상관관계를 보였다. 결론: 본 연구결과 IMRT는 구강건조증을 상당한 정도로 감소시킬 수 있는 것으로 나타났고, XQS와 LSC이 유용한 임상지표로서의 가능성을 보였음을 알 수 있었다. 삶의 질을 저하할 정도의 심한 구강건조증을 피하기 위해서는 양측 이하선 전체에 조사되는 평균선량을 가능한 한 3,500 cGy미만으로 조사되도록 하여야 할 것으로 생각한다. 향후, 충분한 환자를 대상으로 하여 전체이하선의 평균선량에 대한 신뢰할 수 있는 결과와 나아가 타액의 분비량을 대신할 수 있는 임상적지표를 선정하는 연구가 진행되어야 할 것이다.

우리나라의 환경오염 현황과 그 대책 (Environmental Pollution in Korea and Its Control)

  • 윤명조
    • 대한기관식도과학회:학술대회논문집
    • /
    • 대한기관식도과학회 1972년도 춘계종합 학술대회 초록집
    • /
    • pp.5-6
    • /
    • 1972
  • 1960년이래 우리나라 산업은 현저하게 발달하였으며 이에 따르는 부수적인 현상이라고 할 수 있는 교통기관의 발달과 도시인구의 비대도 병행하였다. 그리나 이미 선진국가에서 겪었던 경험과 같이 기계문명의 발달과 함께 자연 환경의 파괴라는 문제에 봉착하게 되었다. 대기오염과 도시소음은 호흡기 질환, 이비인후과 질환, 안질환, 그리고 도시민에 주는 불안감과 피로촉진 적인 요인이 되고 있음은 이미 밝혀졌으며 또한 활발하게 이에 관련되는 연구들이 진행되고 있다. 때문에 인류의 사회복지 향상을 위한 노적의 결과가 우리들의 건강을 위협하는 이율배반적인 현상을 초래하게끔 강요하였다는 모순을 볼 수 있다. 대기오염을 유발시키는 원인은 연료의 연소에 기인되므로 연료사용량의 증가는 대기오염도를 심하게 하여 주는 원인이 된다. 대기 오염물질의 발생원은 연료를 많이 사용하는 곳으로 일반적으로 교통기관, 산업장, 화력발전소 및 난방, 취사 등으로 구분한다. 따라서 연료 사용량과 연소방법을 기초로 하여 연간 대기로 배출하는 오염물질을 추정할 수 있다. 1960년에서 1969년 즉 10년간의 우리나라 연료사용량을 기초로 하여 향후 1980년까지의 대기오염물질의 연간 배출량 추세를 보면 1970년도에 연간 약 80만톤의 오염물질을 전국의 대기속으로 배출하였으며 향후 뚜렷한 대책을 강구치 않는 한 1975년도에는 약 3배로 증가할 것이며 10년 후인 1980년에는 약 6배로 증가된 462만들을 배출할 것으로 추산할 수 있다. 미국의 경우 1968년도의 연간 오염물질 배출량을 보면 2억 1천 4백만 톤을 배출하였으며 1966년도보다 약 70%증가하였다. 그러나 우리나라의 경우를 보면 같은 연도의 증가율은 2.3배로서 3년간의 배출 증가는 미국보다 훨씬 높은 추세를 나타내고 있었다 국토 단위면적(km$^{7}$ )으로 볼 때 우리나라의 1975년도에는 약 24톤을 배출하였으며 미국의 1968년도와 비슷한 배출량이라 할 수 있다. 1975년도에 서울에서 배출되는 오염물질의 양은 연간 36.4만 톤이며 하루에 약 1,000톤을 배출할 것으로 산출된다. 이 사실을 오염원 별로 보면 연간 배출되는 총량의 약 40%는 자동차의 배기에 의하여 오염되고 있으며 산업장은 약 30%를 차지할 것으로 추정된다. 한편 1970년도에 전국에서 배출된 양의 22.8%가 서울에서 집중적으로 배출되었음은 심각한 문제이며 이와 같은 현상을 보존키 위한 대책의 필요성을 암시하여 주고 있다. 서울시에서 배출되고 있는 유해가스 중 자극성이 있는 가스로써 비인후계 질환을 일으키는 유독가스 유황산화물, 질소산화물, 탄화수소는 전 배출량의 절반 이상을 차지하고 있다 특히 유황산화물의 배출원인은 유황분의 농도가 높은 방카C유를 도시에서 많이 사용하고 있기 때문에 라고 생각된다. 실제로 서울시의 대기중에 배출되는 연간 총량의 95%는 벙커 C유라고 지적한 바 있다. 전술한 바와 같이 서울시에서 배출되는 오염물질의 40%는 자동차의 배기에 의하여 오염되고 있으므로 자동차의 문제만 해결한다면 대기오염물질의 40%에 해당되는 연간 배출량인 15만톤(1975년도)은 제거가 가능하며 또한 벙커 C유를 다른 연료로 대치한다면 약 10만톤 유황산화물을 제거할 수 있다 즉 1975년도의 연간 총 배출량 36.4만 톤 중 약 70%에 해당되는 25만톤은 해결할 수 있다는 결론을 얻을 수 있으며 여러 실험결과를 종합하면 최소 약 50%의 배출물을 제거할 소 있는 것으로 믿는다. 도시소음의 발생원은 교통소음, 산업소음, 건설소음 및 일반소음 등으로 구분될 수 있으며 연간 시민들에 의하여 60%가 소음으로 인한 피해에 대한 호소였음을 볼 때 가장 큰 비중을 차지한다고 할 수 있다. 도시소음은 자연의 정숙을 파괴하는 가장 큰 원인이라 할 수 있지만 한편 너무나 큰 비중을 차지하는 공공성을 띄우고 있거나 또는 취재대상이 명확히 구분되지 않는 경우가 많다는 것이 특징이다. 따라서 건설소음은 현재 세계적으로 행정적 규제를 강력히 시행 못하고 있으며 다만 공정에 사용되는 기계류를 기계공학적인 면에서 개선하고 있는 실정이며 교통기관의 경우는 운행노선의 조절(교통량분산) 항로조절, 역사이전 등의 소극적인 방법을 취하고 있으며 일반소음은 경범죄 및 선거법으로 단속하고 있는 실정이다. 도시소음의 가장 큰 비중을 차지하는 소음원은 교통소음이라 할 수 있으며 서울시의 주간도로 주변의 소음도는 평규 75㏈이며 최고 소음도는 85㏈이다. 특히 경적음은 100㏈ 전후로서 도로주변 소음으로서 가장 문제가 된다. 자동차의 운전상태에 따라 소음발생도는 달라서 대형 차량의 경우 발차시의 가장 크며 소형자동차는 속도에 비례하여 크다. 노후차량일수록 소음도는 커서 그 원인은 정비 불량으로 발생되는 차체소음이라 할 수 있다. 따라서 대책면에서 볼 때 정비강화, 교차로와 주차장의 감소 그리고 운행 장애물 제거등에 주력을 두어야 하며 독일의 소음방지 법령중 Hessen 경찰명령(제11조)에 의하면 라인에 경고하는 그의 목적에 자동차 경적을 사용하였을 때에는 200마르크 이상 500마르크 이하의 벌금을 과료하고 있으며 우리나라의 경우는 거의 없다고 할 수 있다. 서울시는 급진적으로 비대하여져 과거 교외에 있던 역이 현재 13개소가 주택지의 가운데 있게 되었으며 기차소음으로 인한 생활환경의 파괴는 크다. 실제로 신촌역의 경우 철로에서 200m 지점에서 소음을 측정한 결과 듸젤기관차에서는 68㏈에서 79㏈였으며 석탄기관차는 68㏈에서 98㏈였다. 공해방지법의 소음평가 방법(NRN)으로 소음분석 및 평가하면 최소 200m 지점에서는 모두 공해방지법에 저촉을 받고 있으며 특히 경적음과 석탄기관차의 주행은 NRN 60을 초과하였으며 이 수치는 ISO의 평가내용에 의하면 주민들의 지역사회 활동에 강력하게 장해를 준다는 결론을 얻을 수 있다. 기차소음의 대책면에서 볼 때 경적을 경종으로 대치하며 또한 주행속도를 조절한다면 많은 도움이 될것으로 추측된다. 일본의 경우 연속철(long rail)의 채용, 탄성체, 결장치의 사용 침목과 철로의 연결지점에 진동흡수재료사용 그리고 필요한 지점에 1~1.5m 높이의 방음벽설치등으로 많은 효과를 얻었다고 한다.

  • PDF

아유르베다'($\bar{A}yurveda$) 의경(醫經)에 관한 연구 (A Study of The Medical Classics in the '$\bar{A}yurveda$')

  • 김기욱;박현국;서지영
    • 동국한의학연구소논문집
    • /
    • 제10권
    • /
    • pp.119-145
    • /
    • 2008
  • Through a simple study of the medical classics in the '$\bar{A}yurveda$', we have summarized them as follows. 1) Traditional Indian medicine started in the Ganges river area at about 1500 B. C. E. and traces of medical science can be found in the "Rigveda" and "Atharvaveda". 2) The "Charaka(閣羅迦集)" and "$Su\acute{s}hruta$(妙聞集)", ancient texts from India, are not the work of one person, but the result of the work and errors of different doctors and philosophers. Due to the lack of historical records, the time of Charaka(閣羅迦) or $Su\acute{s}hruta$(妙聞)s' lives are not exactly known. So the completion of the "Charaka" is estimated at 1st$\sim$2nd century C. E. in northwestern India, and the "$Su\acute{s}hruta$" is estimated to have been completed in 3rd$\sim$4th century C. E. in central India. Also, the "Charaka" contains details on internal medicine, while the "$Su\acute{s}hruta$" contains more details on surgery by comparison. 3) '$V\bar{a}gbhata$', one of the revered Vriddha Trayi(triad of the ancients, 三醫聖) of the '$\bar{A}yurveda$', lived and worked in about the 7th century and wrote the "$Ast\bar{a}nga$ $Ast\bar{a}nga$ hrdaya $samhit\bar{a}$ $samhit\bar{a}$(八支集) and "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$(八心集)", where he tried to compromise and unify the "Charaka" and "$Su\acute{s}hruta$". The "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$" was translated into Tibetan and Arabic at about the 8th$\sim$9th century, and if we generalize the medicinal plants recorded in each the "Charaka", "$Su\acute{s}hruta$" and the "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$", there are 240, 370, 240 types each. 4) The 'Madhava' focused on one of the subjects of Indian medicine, '$Nid\bar{a}na$' ie meaning "the cause of diseases(病因論)", and in one of the copies found by Bower in 4th century C. E. we can see that it uses prescriptions from the "BuHaLaJi(布唅拉集)", "Charaka", "$Su\acute{s}hruta$". 5) According to the "Charaka", there were 8 branches of ancient medicine in India : treatment of the body(kayacikitsa), special surgery(salakya), removal of alien substances(salyapahartka), treatment of poison or mis-combined medicines(visagaravairodhikaprasamana), the study of ghosts(bhutavidya), pediatrics(kaumarabhrtya), perennial youth and long life(rasayana), and the strengthening of the essence of the body(vajikarana). 6) The '$\bar{A}yurveda$', which originated from ancient experience, was recorded in Sanskrit, which was a theorization of knowledge, and also was written in verses to make memorizing easy, and made medicine the exclusive possession of the Brahmin. The first annotations were 1060 for the "Charaka", 1200 for the "$Su\acute{s}hruta$", 1150 for the "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$", and 1100 for the "$Nid\bar{a}na$". The use of various mineral medicines in the "Charaka" or the use of mercury as internal medicine in the "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$", and the palpation of the pulse for diagnosing in the '$\bar{A}yurveda$' and 'XiZhang(西藏)' medicine are similar to TCM's pulse diagnostics. The coexistence with Arabian 'Unani' medicine, compromise with western medicine and the reactionism trend restored the '$\bar{A}yurveda$' today. 7) The "Charaka" is a book inclined to internal medicine that investigates the origin of human disease which used the dualism of the 'Samkhya', the natural philosophy of the 'Vaisesika' and the logic of the 'Nyaya' in medical theories, and its structure has 16 syllables per line, 2 lines per poem and is recorded in poetry and prose. Also, the "Charaka" can be summarized into the introduction, cause, judgement, body, sensory organs, treatment, pharmaceuticals, and end, and can be seen as a work that strongly reflects the moral code of Brahmin and Aryans. 8) In extracting bloody pus, the "Charaka" introduces a 'sharp tool' bloodletting treatment, while the "$Su\acute{s}hruta$" introduces many surgical methods such as the use of gourd dippers, horns, sucking the blood with leeches. Also the "$Su\acute{s}hruta$" has 19 chapters specializing in ophthalmology, and shows 76 types of eye diseases and their treatments. 9) Since anatomy did not develop in Indian medicine, the inner structure of the human body was not well known. The only exception is 'GuXiangXue(骨相學)' which developed from 'Atharvaveda' times and the "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$". In the "$Ast\bar{a}nga$ Sangraha $samhit\bar{a}$"'s 'ShenTiLun(身體論)' there is a thorough listing of the development of a child from pregnancy to birth. The '$\bar{A}yurveda$' is not just an ancient traditional medical system but is being called alternative medicine in the west because of its ability to supplement western medicine and, as its effects are being proved scientifically it is gaining attention worldwide. We would like to say that what we have researched is just a small fragment and a limited view, and would like to correct and supplement any insufficient parts through more research of new records.

  • PDF

2조형(條型) Combine의 이용(利用)에 관(關)한 연구(硏究) (A Study on the Utilzation of Two Furrow Combine)

  • 이상우;김성래
    • 농업과학연구
    • /
    • 제3권1호
    • /
    • pp.95-104
    • /
    • 1976
  • 도입(導入)된 2조용(條用) Combine으로 통일(統一) 및 밀양(密陽) 15호(號) 수도품종(水稻品種)에 대(對)한 포장수확작업(圃場收穫作業)을 실시(實施)하여 Combine의 작업정도(作業精度) 작업성능(作業性能) 기계적(機械的)인 적응성(適應性)을 파악(把握)하고 한국(韓國)에서의 보급전망(普及展望)을 분석검토(分析檢討)한바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 장간종(長稈種)인 밀양(密陽)15호(號)에 대(對)한 Combine 수확작업(收穫作業)은 수확적기(收穫適期)로 부터 13일(日) 경과후(經過後)까지 5회(回)에 걸쳐 시기별(時期別)로 수확작업(收穫作業)을 실시(實施)한바 완숙도(完熟度)에 관계(關係)없이 수확작업(收穫作業) 양호(良好)하였으며 포장손실율(圃場損失率) 1% 미탈곡율(未脫穀率) 1%로 양호(良好)한 편(便)이었다. 2. 단간종(短稈種)인 통일(統一)에 대(對)한 Combine 수확작업(收穫作業)은 완숙기(完熟期)로 부터 수확시기(收穫時期)가 경과(經過)될 수록 포장손실(圃場損失)이 Fig 1과 같은 경향으로 5.13%에서 10.34%로 증가(增加) 하였으며 통일(統一)벼 수확(收穫)을 위(爲)하여는 기계적(機械的)인 개선(改善)이 많이 요망(要望)되었다. 3. 공시(供試)된 Combine은 장간종용(長稈種用)의 기종(機種)이어서 벼 이삭의 높이가 균일(均一)치 못한 단간종(短稈種) 통일(統一)벼는 탈곡부(脫穀部)의 공급(供給) Chain과 급실(扱室)과의 거리가 커서 급동(扱胴)의 급치(扱齒)에 못미치는 부분(部分)이 있어 미탈곡립율(未脫穀粒率)이 평균(平均) 1.6%이었다. 4. Combine 탈곡부(脫穀部) 급동(扱胴)의 회전수(回轉數)(240~350R.P.M)와 동할미(胴割米)의 관계(關係)는 통일(統一) 및 밀양(密陽)15호(號) 양품종(兩品種) 모두 동할율(胴割率)이 1% 미만(未滿)으로 유의차(有意差)가 없었다. 5. 통일(統一)벼는 벼 이삭이 잎속에 들어 있어 탈곡시(脫穀時) 검불의 양(量)이 많으며 특(特)히 생탈곡시(生脫穀時)는 검불량이 더 많이 생기므로 양곡부(揚穀部) 및 배진구(排塵口)에서 폐쇄현상(閉鎖現像)이 자주 일어남으로 선별(選別) 및 배진장치(排塵裝置)의 개선(改善)이 요망(要望)된다. 6. Combine의 접지압(接地壓)은 $0.19kg/cm^2$로 Fig3과 같은 약(弱)한 지내력(地耐力)의 토양(土壤)에서 Combine의 Track이 25cm 침하(沈下)하여도 Combine의 주행(走行)은 가능(可能)하였다. 그러나 지내력(地耐力)은 지점(地点)에 따라 균일(均一)치 않아 침하(沈下)의 깊이가 균일(均一)치 못함으로 침하(沈下) 5cm정도(程度)에서는 예취(刈取) 높이의 조정(調整)없이 수확작업(收穫作業)이 가능(可能)할 것으로 인정(認定)된다. 7. 관행수확작업(慣行收穫作業)과 Combine 수확작업(收穫作業)의 경제성(經濟性)을 검토(檢討)한바 수도맥작(水稻麥作)의 연간(年間) 사용일수(使用日數)를 40일(日)로 하고 작업일수율(作業日數率) 60% 포장작업효율(圃場作業效率) 56%로 할 때 작업속도(作業速度)를 0.273m/sec로 하여 분석(分析)한바 1일작업시간(日作業時間)을 8시간(時間)으로 할 때 연간부담면적(年間負擔面積)이 4.7ha로 ha당(當) 수확작업비용(收穫作業費用)이 관행수확작업비용(慣行收穫作業費用)과 일치(一致)함으로 통일(統一)벼 수확작업(收穫作業)에 이용(利用)될 수 있도록 Combine의 기계적(機械的)인 보완개량(補完改良)이 뒤따르면 Combine의 흡착(吸着)은 경제적(經濟的)으로 타당(妥當)하다고 인정(認定)된다. 8. 장간종(長稈種)의 현(現) Combine을 통일품종수확(統一品種收穫) 작업(作業)에 이용(利用)키 위(爲)하여는 전면측방(前面側方)의 divider가 벼이식에 닿지 않도록 조절할 수 있게 하고 급동(扱胴)과 feed chain의 간격(間隔)을 좁히고 배진장치(排塵裝置)를 개량(改良)하고 수도간장(水稻稈長)에 따라 기계전후조정범위(機械前後調整範圍)를 넓히고 배수불량(排水不良)한 답(畓)에서의 이용(利用)을 위(爲)하여 Track의 폭(幅)을 넓히는 등(等)의 개량(改良)이 요망(要望)된다.

  • PDF