• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.6
• /
• pp.10-21
• /
• 2010

In the cluster-tree network which covers wide area network and has many nodes for monitoring purpose traffic is concentrated around the sink. There are long transmit delay and high data loss due to the intensive traffic when IEEE 802.15.4 is adapted to the cluster-tree network. In this paper we propose Dynamic Channel Allocation algorithm which dynamically allocates channels to increase the channel usage and the transmission success rate. To evaluate the performance of DCA, we assumed the monitoring network that consists of a cluster-tree in which sensing data is transmitted to the sink. Analysis uses the traffic data which is generated around the sink. As a result, DCA is superior when much traffic is generated. During the experiment assuming the least amount of traffic, IEEE 802.15.4, has the minimum length of active period and 90% data transmission success rate. However DCA maintains 11.8ms of active period length and results in 98.9% data transmission success rate.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.33-39
• /
• 2007

Recently there are increasing needs for Internet and various kinds of contents. These traffics for various contents need more amount of data to provide high-quality information and require various QoS depending on the characteristics of contents. However, current Internet service supports BE (Best Effort) service only, therefore IntServ (Integrated Service) scheme and DiffServ (Differentiated Service) scheme are represented to support QoS in IP layer. This paper describes new scheme that provides QoS taking into account the traffic characteristics over Mobile IPv6 network based on IEEE 802.11e by decreasing signal process time using traffic class of DiffServ and MAC and evaluates the performance through computer simulation.

• TTA Journal
• /
• s.97
• /
• pp.166-171
• /
• 2005

한국정보통신기술협회(TTA)에서 제공하고 있는 상호운용성시험(ION: Interoperability ON!)은 각 기술분야에 대해 서로 다른 회사 제품들간 상호운용성을 시험하는 행사로서 2004년 12월 7일부터 9일까지 3일 동안 IEEE802.11a+g 듀얼밴드 고속무선랜 AP(Access Point)와 카드에 대한 ION을 실시하였다. 이번 ION에서는 상호운용성과 더불어 WPA(Wi-Fi Protected Access)보안, 그리고 무선랜 제품의 RF(Radio Frequency) 적합성, AP의 성능 및 안정성에 대하여 시험하였다. 총 6개의 국내업체가 참가한 가운데 TTA 기준장비와의 상호운용성 시험, 참가업체간 상호운용성 시험을 실시하여 국내업체의 802.11a+g 듀얼모드 장비 기술수준 향상 및 앞으로 진행될 무선랜 RF 및 성능에 대한 TTA 인증 안 검토에도 많은 도움을 얻을 수 있었다.

• Information and Communications Magazine
• /
• v.23 no.6
• /
• pp.63-72
• /
• 2006

CDMA 기술을 기반으로 하는 이동통신시스템의 발전과 DSL 기반의 유선통신시스템의 발전은 우리나라를 세계적인 정보통신 강국으로 성장시키고 있다. 세계적으로 높은 수준의 개인용 컴퓨터와 이동통신단말기 보유율을 바탕으로 폭발적인 인터넷서비스 사용량의 증가뿐만 아니라 무선인터넷 서비스에 대한 요구사항도 증가하고 있다. 이에 맞춰 무선LAN은 고속의 가입자 전송속도를 지원하기 위해 발전하고 있다. 이미 high throughput을 목표로 하는 국제 표준화가 진행되어 마무리 단계에 있고, 이에 세계적인 칩셋 업체들이 앞다투어 IEEE 802.11n draft 이전의 EWC버전을 이용한 칩셋을 발표하고 있다. 현재 ETRI에서는 802.11n draft 표준안을 기반으로 하는 칩셋 개발이 완성 단계에 이르렀으며, 이미 그 기능 및 성능에 대해 FPGA를 이용한 시스템구축으로 확인하였다. 앞으로 네트워크, 오피스 네트워크 및 휴대폰 탑재 칩 등에 대한 대규모 시장 형성이 예상되고 있어 경제적 기대효과를 기대할 수 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.385-390
• /
• 2015

Quay cranes are considered core equipment for container terminal operation. However, unmanned operation systems have not as yet been announced due to the technological difficulties of implementation. In this paper, we developed a wireless controller to control a quay crane simulator remotely and conducted its performance test, a first step toward unmanned operation of quay cranes. The communication delay of a developed wireless controller was about 9.4ms on average while that of existing wired controllers was about 5.6ms. The same functions were implemented and tested on a smart phone where the average communication delay was 7.3ms. In addition, to apply the developed system into a real environment, we proposed a network architecture based on IEEE 802.11ac and carried out its performance evaluation. When the distance between two nodes was 50m apart, the throughputs of the TCP (Transmission Control Protocol) and UDP (User Datagram Protocol) were 57Mbps and 189Mbps, respectively. The communication delay of the control data was 9.1ms through the TCP channel. These results reveal the proper working of remote quay crane operation if we adopt the IEEE 802.11ac network.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.42-47
• /
• 2008

In this article a novel constant amplitude precoding for impulse UWB system is proposed. According to IEEE 802.15.4a, impulse UWB can be used in indoor localization and sensor data transmission. Most USN(ubiquitous sensor networks) needs multiple access. However impulse UWB system has a limited capability to detect superpositioned signal induced by multiple access. To overcome this problem we have adopted the concept of CAMC(Constant Amplitude Multi-Code) deviced by Wada and Kim. The proposed system consists of systematic constant amplitude precoding and LDPC decoding. And this system shows a good BER performance in computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.498-504
• /
• 2008

In this paper, an efficient hardware platform for the digital signal processing for OFDM Communication systems is presented. The hardware platform consists of a single FPGA, two DSPs with 8000 MIPS of maximum at 1 GHz clock, 2-channel ADC and DAC supporting maximum 125 MHz sampling rate, and flexible data bus architecture, so that a wide variety of baseband signal processing algorithms for practical OFDM communication systems may be implemented and tested. The IEEE 802.16 software modem is also presented in order to verify the effectiveness and usefulness of the designed platform.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.156-165
• /
• 2023

IEEE 802.15.4e-TSCH is recognized as a wireless industrial sensor network standard used in IoT systems. To ensure both power savings and reliable communications, the TSCH standard uses techniques including channel hopping and bandwidth reserve. In TSCH mode, scheduling is crucial because it allows sensor nodes to select when data should be delivered or received. Because a wide range of applications may necessitate energy economy and transmission dependability, we present a distributed approach that uses a cluster tree topology to forecast scheduling requirements for the following slotframe, concentrating on the Poisson model. The proposed Optimized Minimal Scheduling Function (OMSF) is interested in the details of the scheduling time intervals, something that was not supported by the Minimal Scheduling Function (MSF) proposed by the 6TSCH group. Our contribution helps to deduce the number of cells needed in the following slotframe by reducing the number of negotiation operations between the pairs of nodes in each cluster to settle on a schedule. As a result, the cluster tree network's error rate, traffic load, latency, and queue size have all decreased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.350-357
• /
• 2007

The IEEE 802.15.3 high-rate WPAN has been developed to communicate with devices within l0m. A piconet consists of one Piconet Coordinator (PNC) and several devices. The devices associated with a parent piconet can become child PNCs in order to form child piconets. A mesh network made up of a parent piconet and several child piconets can support multi-hop communications. In this paper, we analyze the maximum level and the avaliable superframe size to make the best use of bandwidth for multi-hop communications, and compare the analysis with the simulation results in terms of time to discover devices for multi-hop communications. The average number of levels in mesh networks is shown to be about 1.9 when the number of devices increases within a fixed area. We have also shown that the maximum available superframe size is 52ms and the discovery time is approximately 155ms.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.113-123
• /
• 2010

In this paper, an efficient network configuration method is proposed for mobile nodes in LR-WPAN (Low Rate Wireless Personal Area Network) based on the IEEE 802.15.4 standard. The proposed MSBS (mobile sensor beacon setup) method can be used to implement a joining procedure by which an improved processing rate can be achieved. This improvement is achieved by using BOP (Beacon only Period). In this method, the performance of mobile nodes is enhanced by using information on depth, traffic, and RSSI (Received Signal Strength Indication). By using the MSBS method, trusted data can be transferred and traffic overloads that occur at specific nodes can be prevented. The information obtained from the mobile nodes in wireless networks is analyzed using the proposed method, in order to study the performance of the method. Simulation results show that the MSBS method can be used to obtain an efficient network configuration according to the mobility of nodes in LR-WPAN.