• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.640-650
• /
• 2004

Channel estimation schemes are proposed for Multiple Input-Multiple output Orthogonal Frequency Division Multiplexing(MIMO-OFDM) systems based on the physical layer specification of the IEEE 802.1 la. By combining the space-time block coding(STBC)/ space-frequency block coding(SFBC) techniques with the transform domain interpolation, the proposed algorithms achieve more accurate channel coefficients for the MIMO channels such that improve the BER performance. The performance improvements of the proposed algorithms are evaluated by simulations under the various multipath fading channel environments and various transmission rates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2004

In this paper we apply block turbo coding at the transmitter and iterative decoding algorithm at the receiver for different operating modes, based on the 5 ㎓ IEEE 802.1 la WLAN system, instead of convolutional coding and soft decision viterbi algorithm to improve forward error correcting performance. Experimental results showed that each coding scheme outperforms coding gains of up to 3.5 ㏈ at the BER of 10$\^$-3/.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.794-806
• /
• 2004

This paper deals with correction of frequency offset and analysis of quantization angle noise in the IEEE 802.1la OFDM system. The rotation phase per symbol due to the carrier frequency offset is estimated from auto-correlation of the short Preambles, which are over-sampled for the reduction of noise in OFDM signals. The pilot signals are introduced to estimate the rotation phase per OFDM symbol due to estimation error of the carrier frequency offset and the sampling frequency onset. During the estimation and correction of the frequency onsets, a CORDIC processor and a look-up table are used for the conversion between a rotation phase and its complex number. Being calculated by a limited number of bits in the CORDIC processor and the look-up table, the rotation phase and its complex number have quantization angle errors. The quantization errors are analyzed as SNR (signal to noise ratio) due to the quantization bit numbers. The minimum bit number is suggested to meet the specification of IEEE 802.1la properly. Finally, the quantization errors are evaluated through simulations on number of quantization bits and SNR of received signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.803-809
• /
• 2005

This paper presents a novel method of mutual coupling suppression between antenna elements for performance improvement in planar array antenna system. Two miniature patch antenna elements satisfied IEEE 802.1 la($5.75\~5.35\;GHz,\;5.75\~5.85\;GHz$) are used for this research, they are arrayed by half wave length interval. It is observed about -20 dB mutual coupling between each antenna element at center frequency. To suppress mutual coupling, the arrayed antennas with a reversed 'U' structure are observed below -30 dB mutual coupling at IEEE 802.1la band.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.461-464
• /
• 2002

OFDM is a promising technology for high speed multimedia communication. In this paper, Software IPs for IEEE 802.11a OFDM system are designed and optimized for TI's TMS320C6201 fixed-point DSP. Then considering the execution cycles of the target DSP for each functions of the system, an efficient HW/SW partitioning method is proposed and according to this results, high speed Viterbi decoder hardware IP for 802.11a system is designed and verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.40-45
• /
• 2007

In this paper, aim to suggest the medical information wireless transmission system to provide the mobility of medical service by means of wireless area network which makes it possible, home or at a long range, to check and oversee the state of patients, and to can out a simulation. The proposed method converts medical information to digital data in an emergency and sends them to mobile terminals such as PDAs to make possible swift first aid. The simulation took advantage of the OFDM transmission method based on IEEE 802.1la in order to send reliable medical information in mobile wireless channel environment, and analyzed the system performance by applying convolution encoding to transmit reliable information in AWGN and 3-ray mobile multipath fading channel environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1152-1160
• /
• 2004

OFDM technique was adopted as the standard of IEEE 802.1 la and it has been widely used for wireless LAN, European DVB/DAB system, Korean DMB system. In the standard of IEEE 802.11a the data packet is composed of two parts, preamble and data. Preamble is composed of short pilots and long pilots, which are used for synchronization and estimation of frequency offset and channel. We can also compensate phase noise effect in the transceiver by using above pilots. The phase noise is more complicate than frequency offset and seriously affects system performance. In this paper, we newly propose CPE and ICI simultaneous compensation method to compensate phase noise generated by transceiver oscillator and compare with previous studies. As results, phase noise effect can be significantly compensated by CPE cancellation method, PNS algorithm and our proposed CPE and ICI compensation method. Especially, the proposed CPE and ICI compensation method can achieve the best BER performance compared with original OFDM, CPE cancellation method and PNS algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.502-513
• /
• 2004

This paper proposes a symbol synchronization method in the IEEE 802.11a wireless OPDM system, which uses only signs of the in-phase and the quadrature signals in the short preamble. The short preamble is sampled with 2 tines of Nyquist sampling rate and both of the autocorrelation and the cross-relation are used in the proposed method. This method has some advantages that the ACG (Automatic Gain Control) can be processed concurrently during the short preamble and its implementation is not much complicated. The proposed symbol synchronization method is verified through simulations on frequency offset, multi-path and white Gaussian noise.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1106-1113
• /
• 2005

This paper presents a dual-band mixer for multi-standards of IEEE 802.1la/b/g using a single local oscillator, so as to improve the defects of legacy systems. Those systems have duplicate local oscillators and mixers to handle dual band signals, increasing complexity of system and power loss. The proposed circuit shows 11.6 dB, 16.8 dB of conversion loss and 8.77 dBm, 12.5 dBm of IIP3(Input 3rd Intercept Point) for respective bands when the two RF inputs of 2.452 and 5.260 GHz are down-converted to the identical 356 MHz If frequency. The RF-LO isolations are measured 36 dB, 41 dB at each frequencies and over 50 dB of LO-IF isolations are achieved at all cases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.397-406
• /
• 2009

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.1la wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual timing delay in the WAVE multipath fading channels after starting initial timing synchronization. In this paper, the tracking algorithm that synchronizes symbol timing is proposed to continually compensate additional timing delay. Computer simulation of the proposed algorithm is performed in the worst communication environments that apply to maximum timing delay. Computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.