• Information and Communications Magazine
• /
• v.24 no.9
• /
• pp.104-110
• /
• 2007

UWB는 2002년부터 FCC에서 상용을 허용한 이후 IEEE802.15.3a에서 DS-CDMA 방식과 MB-OFDM 방식을 논의해 왔으나 표준안 도출에 실패한 후 지금은 WiMedia Alliance와 UWB Forum에서 각기 표준화 진행중이다. Intel, Microsoft, HP 등이 주축인 WiMdeia Alliance는 "PAN 환경에서 장치간의 무선 멀티미디어 연결과 상호 운용성"을 위하여 구성되었으며, 2003년 MBOA와 합병하여 MBOA 기술을 기반으로 하는 물리계층 및 MAC 계층 기능 규격을 ECMA 등에 표준으로 등록하였고, 그 외 표준화 단체에 표준안 채택을 위한 노력을 계속하고 있다. 또한 USB Forum, Bluetooth, IEEE1394 등에 MBOA 기반 응용이 사용될 수 있도록 노력하고 있으며, 2005년 MBOA 기반의 Certified Wireless USB 규격으로 UWB 시장을 선점하기 시작하였으며, Bluetooth 및 IEEE1394에서도 MBOA 기반 표준이 진행되고 있다. 본 고는 WiMedia Alliance의 최근 표준 활동과 WiMedia 규격을 활용한 국내 외 기술동향에 대하여 살펴보고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1213-1237
• /
• 2019

Vehicular Ad-hoc Network (VANET) facilities envision future Intelligent Transporting Systems (ITSs) by providing inter-vehicle communication for metrics such as road surveillance, traffic information, and road condition. In recent years, vehicle manufacturers, researchers and academicians have devoted significant attention to vehicular communication technology because of its highly dynamic connectivity and self-organized, decentralized networking characteristics. However, due to VANET's high mobility, dynamic network topology and low communication coverage, dissemination of large data packets (e.g. multimedia content) is challenging. Clustering enhances network performance by maintaining communication link stability, sharing network resources and efficiently using bandwidth among nodes. This paper proposes a mobility-based, multi-hop clustering algorithm, (MBCA) for multimedia content broadcasting over an IEEE 802.11p-LTE-enabled hybrid VANET architecture. The OMNeT++ network simulator and a SUMO traffic generator are used to simulate a network scenario. The simulation results indicate that the proposed clustering algorithm over a hybrid VANET architecture improves the overall network stability and performance, resulting in an overall 20% increased cluster head duration, 20% increased cluster member duration, lower cluster overhead, 15% improved data packet delivery ratio and lower network delay from the referenced schemes [46], [47] and [50] during multimedia content dissemination over VANET.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.273-279
• /
• 2014

In this paper, we propose a novel algorithm for three dimensional positioning system and implement a system over indoor wireless channel. A commercial modules are used for mobile and fixed nodes which are product of German company Nanotron Co. This module adopts chirp spread spreading scheme as modulation method to improve the ranging resolution and the module satisfies the IEEE standard 802.15.4a. The distance computation is based on received signal strength(RSS) levels and trilateration method. A testbed was set up to measure and compare the positioning estimation error of the proposed algorithm. The experiments results showed that the accuracy of location estimation was sufficiently good as much as 1m distance error in a wireless environment in an office building.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.106-113
• /
• 2009

Recently, due to many industrial accidents at construction sites, a variety of researches for structural health monitoring (SHM) of buildings are progressing. For real site application of SHM, one of the advanced technologies has blown as wireless sensor networks (WSN). In this paper, we proposed WIVA(WSN Monitoring framework based on 3D Visualization and Augmented Reality in Mobile Devices) system that applies 3D visualization and AR technology to mobile devices with camera based on WSN in order to expand the extent of information can observe. Moreover, we performed experiments to validate effectiveness in 3D and AR mode that utilize WSN data based on IEEE 802.15.4. In real implementation scenario, we demonstrated a fire occurrence test in 3-story building miniature.

• Journal of electromagnetic engineering and science
• /
• v.4 no.3
• /
• pp.124-127
• /
• 2004

A novel printed inverted-F antenna for dual-band WLAN is presented. The proposed design is based on the folded quarter-wave antennas, which have a conductor plate having two arms. An extremely thin prototype antenna is fabricated according to the simulation result. The obtained antenna can perform in IEEE802.11a, b(2.4～2.484 GHz and 5.15～5.35 GHz bands) and be adopted for laptop applications. All the measurements are performed in the actual test fixture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10B
• /
• pp.639-647
• /
• 2005

When a DEV associates with an existing WPAN, the PNC checks the capabilities of the new DEV to see if it is more capable to be the PNC of the piconet based on the criteria defined in the IEEE Std 802.15. If the new DEV is more capable and the current security policies allow it, then the PNC has the option of handing over control of the piconet to the DEV that has just joined. And, If the PNC is shutting down or wants to leave the WPAN, it also uses the handover process to give control to another DEV in the piconet. However, IEEE 802.15.3 checks only DEV capability information for more PNC capable. For PNC selection, it should consider the radio coverage of new PNC capable DEVs. So, we propose the method of PNC selection with accessibility check. This method manages PNC candidate list in the current piconet. In this paper, we analyze accessibility problems for PNC selection in section 2. In section 3, we explain CI(Configuration Inquiry) process which is proposed by Sony Corporation and propose PCI(PNC Candidate Inquiry) process. Also, we perform numerical analysis to compare PCI process with CI process in section 4. Finally, we conclude in section 5.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.27-30
• /
• 2003

무선 통신 서비스에 대한 수요가 급격히 증가하면서 높은 데이터 전송율을 갖는 무선 통신에 대한 연구가 활발히 진행되고 있다. UWB는 (Ultra Wide Band) 이러한 문제점을 해결할 수 있는 통신 방법 중의 하나로 이 논문에서는 현재 IEEE 802.15.TG3a 표준화 위원회에서 제시하고 있는 채널 모델에 대해서 알아보고, 제시된 채널 모델에 LS (Least Square) 방법을 적용하여 채널의 임펄스 응답을 (Channel Impulse Response) 추정한다. 채널 추정의 성능 지표로 Preamble의 크기에 따른 MSE와 (Mean Square Error) 각각의 채널에 대한 비트 에러율을 사용하여 모의 실험을 본 논문에서 다루는 추정 기법의 성능을 분석한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.1014-1020
• /
• 2009

In this paper, a novel UWB(Ultra Wide-band) antenna with suppressed band of IEEE 802.11a($5.15{\sim}5.825\;GHz$) WLAN was designed and fabricated by using SRR(Split Ring Resonator) with band rejection property. MWS(Micro-wave Studio) of CST company was utilized in the design stage. The antenna was fabricated on a substrate, Rogers 4003, with the thickness of 0.8 mm and relative permittivity of 3.38. The measured result shows that the proposed antenna has a good return loss below -10 dB and group delay below 1nsec over UWB communication band($3.1{\sim}10.6\;GHz$) except WLAN band. It also shows the omni-directional radiation pattern.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.133-137
• /
• 2016

Millimeter wave wireless communication systems, especially those targeting indoor high rate data transfer, have a strong requirement for high quality wireless link. Unfortunately, in this frequency band, the electromagnetic wave has to sustain the high propagation loss caused by the smaller wavelengths. In this scenario, beamforming technique, which enhances the link quality by focusing the radiation power on a direction, becomes one of the most important techniques in millimeter wave band wireless communication. In recent year, there been conducted many research on beamforming to improve the performance of wireless system. In this paper, we evaluate the performance of a simplified codebook-based beamforming scheme which is based on multiple-procedure and three-state beam selection. The simplified scheme significantly reduces beamforming setup time, comparing to the exhaustive searching, two-level searching adopted in IEEE 802.15.3c standard, and also conventional multi-level scheme.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.174-177
• /
• 2003

본 논문에서는 주파수 자원 고갈에 대한 문제를 해결할 수 있는 실내 UWB (Ultra Wide Band) 무선 채널에 대해 소개하고, UWB 무선 채널에서의 신호를 획득하는 방법에 대해 제안한다. IEEE 802.15.TG3a 표준화 위원회에서 제시하는 채널 모델에 대한 이해를 바탕으로 차등 부호 상관을 적용한 신호 획득에 대해 설명하며 이를 UWB 무선 채널에 적용하여 모의 실험을 통해 성능을 분석한다. 신호 획득의 성능 평가 기준으로 신호대 잡음비에 따른 검파 확률을 (Detection Probability) 보여주며, 한 채널 모델에 대해 m-수열의 길이에 따른 성능과 수열의 종류에 따른 성능, 그리고 부호 상관을 적용하는 방법에 따른 성능을 분석한다.