• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.31-34
• /
• 1998

In this paper, a Single-phase Active Rectifier(SAR) with high power factor capability for inverter air-conditioner is adopted for satisfying the international standards of input current harmonics, IEC 1000-3-2. Comparing the conventional boost power factor correction circuit, one diode drop is reduced in the power flow path of the SAR circuit, so the system efficiency is improved. To apply the control IC, such as UC3854, ML4821 and so forth, to the SAR, the adequate sensing circuits are proposed. The design rules of passive components and two control loops are also presented. The prototype SAR circuit with 3㎾ power consumption is builted and tested to verify the operation of the proposed circuit.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.677-682
• /
• 1998

A Single-phase Active Rectifier (SAR) [4-6] with high power factor capability is adopted to satisfy the international harmonic current standards such as IEC 1000-3-2. To minimize the input current distortion and to apply the control IC, such as FA5331, UC3854, ML4821 and so forth, the new adequate sensing circuits of the input voltage and current are proposed. There are tow methods applicable the SAR to inverter air-conditioner from the viewpoint of both efficiency and cost. The selecting methods of the passive components are presented for the two approaches. Using the determined components, the loss analyses are carried out. The prototype SAR circuits of these two approaches with 3kW power consumption are built and the operation and performance of the circuits with power factor correction capability are verified through the experimental results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.357-360
• /
• 2005

본 논문은 안전필수 소프트웨어라 할 수 있는 원전(원자력발전소) 소프트웨어의 품질요건을 원자력법, 시행규칙, 규제지침, 표준에 입각하여 분석하였고, 국제표준인 ISO(International Organization for Standardization) 소프트웨어 표준이 원전 소프트웨어 품질요건에 부합될 수 있는지를 ISO/IEC 12207을 중심으로 분석하였다. 현재는 요구되고 있지 않으나 앞으로 원전 소프트웨어 공급자에 대한 소프트웨어 개발능력 평가 시 소프트웨어 인증취득을 요구함으로써 원전 소프트웨어의 품질 향상과 안전성을 도모할 수 있는 방법을 제안하였다. 원전 소프트웨어에 요구되는 안전성분석에 대해서 검토하였다.

• Journal of Surface Science and Engineering
• /
• v.38 no.6
• /
• pp.216-226
• /
• 2005

Pb-Free Technology was born with environmental problems of electronic component, Being connected by big and small project of every country. Also, in each country environment is connected and various standards of IEC, ISO, MIL, JIS, KS, JEDEC, EIAJ etc. All products can divide at solder part and finishing part These can tested each and synthetically divide. This research is reliability evaluation for three kind of ph-free SnCu solder plating solution and it's deposit. First, executed analysis about Pure Sn, SnCu solutions and plating surface by way similar to other plating solution analysis. Next, executed reliability about test method and equipment for reliable analyzer system construction. Next, data comparison and estimation, main estimation test method and item's choice. In this paper the systematic surface analysis and reliability for plating solutions and it's deposit in metal surface finishing processes could be shown.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.11a
• /
• pp.151-155
• /
• 2001

This paper presents the interrelationship chart between software quality characteristics and engineering attributes. The software quality characteristics and their subcharacteristics are excerpted front IS0/1EC 9126 standards, and the engineering attributes are from Deutsch and Willis[4]. Based on the previous studies and subjective judgement, trisected interrelationship(strong, medium, weak) between these two groups are derived. The results are summarized in a table, and can be used as a quick reference guide to the software quality engineering applications such as quality evaluations for software products, selection of key engineering attributes for high-quality software production, and so forth.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.69-79
• /
• 2007

Corporations are faced with the key strategic task of adopting a comprehensive management system of a new paradigm in order to enhance their products' quality, safety, and reliability, as well as to minimize the cost of quality. The purpose of this paper is to present a methodology that can be used by corporations to ensure a product's reliability, safety, and maintainability, with minimal costs, by measuring dependability levels and conducting DEA analysis. The methodology will be a way for corporations to adopt an optimal dependability management system based on a quality management system of ISO 9001:2000 standards.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.113-121
• /
• 2012

The important elements and conditions to improve corporate competitiveness are customer development, new product development, sales increase, net profit increase, and other factors. Even if those competitiveness elements are well prepared, obstacles may exist. In this paper, we examined the risk, the deadliest obstacle that can affect corporate. We selected the risk factors that exist in functional categories in the system connected complicatedly and variously by organizational value chain of corporate, and examined the conceptual model of Enterprise Risk Management System based on the precedent studies.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1131-1136
• /
• 2008

The single-phase PWM converter employing power semiconductors is currently applied to the power unit of high-speed rail vehicle and increasingly used as the front-end converter with properties of near unity power factor. Power factor and harmonics are increasingly important needs for drive system of high-speed rail vehicle. The proposed approach has many advantages which include fewer semiconductor components, simplified control, high performance features and satisfies IEC 555 harmonic current standards. Simulation results show that the dc-link voltage control obey the reference value during constant load and input current is near sinusoidal.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.207-221
• /
• 2006

Corporations are faced with the key strategic task of adopting a comprehensive management system of a new paradigm in order to enhance their products' quality, safety, and reliability, as well as to minimize the cost of quality. The purpose of this paper is to present a methodology that can be used by corporations to ensure a product's reliability, safety, and maintainability, with minimal costs, by measuring dependability levels and conducting DEA analysis. The methodology will be a way for corporations to adopt an optimal dependability management system based on a quality management system of ISO 9001:2000 standards.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.185-187
• /
• 2017

국제 표준화 기구인 ISO/IEC와 NIST(National Institute of Standards and Technology)에서는 정보 유출 방지 및 정보의 유효성 인증을 위해 다양한 암호 기법들을 표준으로 권고하고 있다. 그 중 NIST SP 800-38D에서 표준으로 권고된 GCM(Galois/Counter Mode) 인증 암호화 모드는 블록암호의 CTR 운영모드와 GHASH를 이용하여 메시지의 기밀성과 무결성을 동시에 제공하는 운영모드이다. 본 논문에서는 ARIA 블록암호 기반의 ARIA-GCM 프로세서를 Verilog HDL로 모델링 하고, Virtex5 FPGA로 구현하여 정상 동작함을 확인하였다. $0.18{\mu}m$ 공정의 CMOS 셀 라이브러리로 합성한 결과 20 MHz의 동작주파수에서 44,986 GE로 구현되었다.