• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.386-393
• /
• 2023

Recently, the demand for autonomous navigation technology has increased, and related research is also increasing. Autonomous ships generally follow the planned route, calculate the avoidance route according to the risk situation while sailing, and follow a calculated route. In general, an automatic steering device is used to follow the route, and among the operational automatic steering device methods, the route control mode is the most appropriate method to apply to autonomous ships. Therefore, in this study, we developed a route-tracking algorithm to apply an avoidance route using the navigation control mode of an automatic steering device. The algorithm was developed by dividing the straight and turning sections. A performance test was conducted to satisfy the performance suggested by IEC 62065, the relevant international standard, using simulator equipment that had acquired international certification to verify its performance. The results of the performance verification confirmed that the cross-track error, which represents the straight distance between the ship and the route, satisfied the performance standards suggested by IEC 62065 when the ship followed the route.

• Journal of Biomedical Engineering Research
• /
• v.31 no.2
• /
• pp.123-128
• /
• 2010

The thermometers is widely used in diagnostic medical devices, and the safety and accurate performance of these devices are important in the diagnosis and monitoring of personal health. Especially, the accuracy of infra-red thermometer is highly emphasized. Here two typical thermometers are utilized for this purpose: the electronic thermometers measure body temperature by contacting to subject while infra-red thermometers measure by no contacting to subject. Therefore, the evaluating items of each thermometer are different, and the standard for each temperature is highly needed. But, there have been no international standards of each thermometer such as IEC. In this paper, we developed the standards of electronic and infra-red thermometer based on national standards such as KS, ASTM, EN, JIS and FDA guidance. The new standards focused on the safety and suitable performance for health care. This standards were applied to enact and revise the electronic medical device standards. So it can be applied to evaluate the safety and performance on technical file review. We predict that this standard will improve the quality of diagnostic medical devices (thermometers) and increase the international competitive power of domestic product.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.271-284
• /
• 2023

This study compared 431 acoustic terminology of South Korean industrial standards and North Korean national standards based on IEC 60050-801:1994 international standards. In addition, this study attempted to integrate acoustic terminology between the two Koreas. There were 139 (32.3 %) AA types with exactly the same form of terminology, 35 (8.1 %) Aa types with different spellings due to differences in linguistic norms, and 257 (59.6 %) AB types with completely different forms. Morphologically, there were more than twice as many different types of terminology as the same type. In the integration of acoustic terminology with different forms, 178 (61 %) North Korean terminology and 76 (26 %) South Korean terminology were adopted. we would like to overcome the limitations of this study through the following suggestions. First, the government should support academic exchanges between the two Koreas and encourage the establishment of common standards for acoustic terminology. Second, efforts should be made to share acoustic terminology data between the two Koreas and publish an integrated acoustic terminology dictionary. Third, South and North Korea should jointly launch a terminology committee to make efforts to revise international standards together.

• Journal of Biomedical Engineering Research
• /
• v.3 no.2
• /
• pp.123-130
• /
• 1982

In this paper, Electrocardiography principles and design philosophy are discussed. 1-channel portable automatic ECG amplifier, GSM 110A has high reliability, performance and safety. It reveals that GSM 110A satisfies the IEC, VDE standards. Clinical tests are performed and proved its performance and ease of use.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.213-220
• /
• 2001

This paper presents the interrelationship between software quality character and engineering attributes. The software quality characteristics and subcharacteristics are excerpted from IS0/IEC 9126 standards, and the engineering attributes are from Deutsch and Willis〔4〕. Based on the previous studies a subjective judgement, trisected interrelationship(strong, medium, weak) bet these two groups are derived. The results are summarized in a table, and can be used as a quick reference guide to the software quality engineering application such as quality evaluations for software products, selection of key engineering attributes for high-quality software production, and so forth.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.59-63
• /
• 2002

The purpose of this study is to carry out comparative analysis of the differences between the trend of biometrics-related system(security) standardization in the world and that of Korea, and to suggest ideal directions and building plans for domestic biometrics industry. Its purpose also includes constructing promptly a standardization of domestic biometrics industry based on the suggested standards.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.1
• /
• pp.93-103
• /
• 2002

The certification of software products can provide a greater level of acceptance and feeling of security to customers of these products. This paper presents a certification method for the quality of package software. First of all, the evaluation criteria are derived from ISO/IEC 9126 and 12119 standards, and then the evaluation module are designed considering the measurement scale type. The results can be applied to construct the certification scheme of software product quality for the commercial purpose.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2024-2026
• /
• 2001

This paper propose the new concept and design method of PC based automation in factory automation. In order to apply this system, the essentially proposed three technologies are following - Using the industrial automation control language, recognized by IEC 1131-3 - to apply Windows-NT operation system - to apply the Fieldbus network based on international standards.

• International journal of advanced smart convergence
• /
• v.2 no.2
• /
• pp.43-47
• /
• 2013

Within the United Nations framework of the Economic and Social Council, the United Nations Economic Commission for Europe (UNECE) serves as the focal point for trade facilitation recommendations and electronic business standards, covering both commercial and government business processes that can foster growth in international trade and related services. Accordingly United Nations Centre for Trade Facilitation and Electronic Business (UN/CEFACT) was established, as a subsidiary, intergovernmental body of the UNECE Committee on Trade, mandated to develop a program of work of global relevance to achieve improved worldwide coordination and cooperation in these areas. Domestic development and distribution of electronic documents to be conformed to international standards, it is enough to have the role of international activities continue to supply part of the domestic industry and the trends in participation and international standard.

• Progress in Superconductivity
• /
• v.11 no.1
• /
• pp.19-24
• /
• 2009

Among the various types of fault current limiters, superconducting fault current limiters could be the most preferable choice for high voltage electric power systems owing to the remarkable current limiting characteristics of superconductors. But, there have been no commercial superconducting fault current limiters which were installed into actual electric power systems until these days due to some remained technical and economical problems. Thus, in order to promote the development and application of the superconducting fault current limiters into real field, it is essential to understand the power utilities’ requirements for their networks and also suitable test method and some specifications should be prepared. This paper focuses on the matters of test requirements and standardization issues that should be prepared for commercialization of superconducting fault current limiters. The unique current limiting characteristics of superconducting fault current limiters were investigated and related other standards including circuit breakers, transformers, reactors, power fuse, and fused circuit breakers were compared to setup the basis of novel specification of superconducting fault current limiters. Furthermore, required essential test procedures for superconducting fault current limiters were suggested.