• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.702-708
• /
• 2002

In this paper, we design the dual frequency antenna that could easily determine two operation frequencies by its inverted-F antenna structure and spur line length. The spur line is applied to the inverted-F antenna, in order to dual operation characteristics in PCS and cellular frequencies. It has designed by using the IE3D commercial software based on the moment method. As the designed antenna is fabricated and measured, you can see the results such as the return loss, the input impedance, the radiation patterns, and the gain. The size of this antenna is 40 mm$\times$14 mm$\times$9.4 mm, it is compact enough to use as an intenna. Also, This antenna can be used with cellular and PCS phone of domestic market.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.153-157
• /
• 2008

The MCS(Micro-coplanar strip) line has been analyzed. The conformal mapping method is used to calculate the quasi-static effective permittivity and characteristic impedance of this MCS line. The computed results of the present work are found to be in good agreement when compared with the results obtained using commercial S/W, IE3D. And in this paper, the stepped-impedance low pass microstrip filter is designed and fabricated with MCS lines for improving the frequency responses. The LPF proposed structure has been also designed and implemented to have the sharp attenuation characteristics in stop band. The agreement between simulation and measurement results verify the implemented LPF.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.822-828
• /
• 2001

In this paper, a high gain microstrip antenna with rectangular cavity backed is designed. A single microstrip patch is basically a low gain radiator As a ga in enhancement method, superstrate loading techniques are applied to the $2\times2$ microstrip array antenna with cavity backed. In antenna design, although the broadside gain increases as the cavity is enlarged, a cavity size of $3\times3$ wavelength is sufficient. The distance between the radiating elements is chosen as 1.5 free-space wavelength. The antenna radiation characteristics are calculated by IE3D software and compared with the experimental results. Experimental results show that the maximum gain is 18.6dBi at the frequency of 9.16GHz, which is good agreement with the calculations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1278-1282
• /
• 2003

A new interacting multiple model (IMM) method using intelligent input estimation (IIE) is proposed to track a maneuvering target. In the proposed method, the acceleration level for each sub-model is determined by IIE-the estimation of the unknown acceleration input by a fuzzy system using the relation between maneuvering filter residual and non-maneuvering one. The genetic algorithm (GA) is utilized to optimize a fuzzy system for a sub-model within a fixed range of acceleration input. Then, multiple models are composed of these fuzzy systems, which are optimized for different ranges of acceleration input. In computer simulation for an incoming ballistic missile, the tracking performance of the proposed method is compared with those of the input estimation (IE) technique and the adaptive interacting multiple model (AIMM) method.

• IE interfaces
• /
• v.15 no.3
• /
• pp.247-255
• /
• 2002

For the recent multimedia service, the network should be fast, stable, and reliable. In order to provide reliability of the network, certain survivability of the network, which guarantees it's functions even though there is some failure on the network, should be satisfied. Also, for a pair of nodes on the network, there must be paths of which numbers of hops are within a certain limit for realtime service between them. In this paper, we propose a longest shortcut method for solving the survivable network design problems with hop limit. Through the computational results, we compare the efficiency of the method with an existing shortest shortcut method and find that the proposed method is more efficient than the shortest shortcut method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.99-102
• /
• 2003

A new interacting multiple model (IMM) method using genetic algorithm (GA)-based intelligent input estimation(IIE) is proposed to track a maneuvering target. In the proposed method, the acceleration level for each sub-model is determined by IIE-the estimation of the unknown acceleration input by a fuzzy system using the relation between maneuvering filter residual and non-maneuvering one. The GA is utilized to optimize a fuzzy system fur a sub-model within a fixed range of acceleration input. Then, multiple models are composed of these fuzzy systems, which are optimized for different ranges of acceleration input. In computer simulation for an incoming ballistic missile, the tracking performance of the proposed method is compared with those of the input estimation(IE) technique and the adaptive interacting multiple model (AIMM) method.

• IE interfaces
• /
• v.11 no.3
• /
• pp.55-63
• /
• 1998

In this study we consider a CONWIP system in which the processing times at each station follow an exponential distribution and the demands for the finished products arrive according to a compound Poisson process. The demands that are not satisfied instantaneously are assumed to be lost. We assume that the lot size at each station is greater than one. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts at each station, average number of parts at each station and the proportion of lost demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a closed queueing network with a synchronization station and analyze the closed queueing network using a product form approximation method. A recursive technique is used to solve the subnetwork in the application of the product-form approximation method. To test the accuracy of the approximation method, the results obtained from the approximation method were compared with those obtained by simulation. Comparisons with simulation have shown that the accuracy of the approximate method is acceptable.

• IE interfaces
• /
• v.13 no.2
• /
• pp.188-194
• /
• 2000

A pattern recognition system is proposed to recognize characters in any type of Giro. The system consist of the character segmentation and the character recognition. Positional features from two round markers at the upper-right part and lower-left part of Giro is used for extracting character strings from images and RLE analysis is used if there are no round markers. A multi step combined method, which use a structural method and a statistical method, is used to improve recognition. The structural method apply rules on each characters, whereas a statistical method gives a different weighting vector to each pixel for improving the classification performance in regard to noises and distortions. The experimental results show that the proposed combined method has higher recognition rate, over than 98% even in cases that images are rotated about 10 degrees as well as have noises.

• IE interfaces
• /
• v.7 no.3
• /
• pp.193-199
• /
• 1994

The purpose of this paper is to develop a method of the sensitivity analysis that can be applicable to a degenerate tree solution of the minimum cost flow problem. First, we introduce two types of sensitivity analysis. A sensitivity analysis of Type 1 is the well known method applicable to a spanning tree solution. However, this method have some difficulties in case of being applied to a degenerate tree solution. So we propose a sensitivity analysis of Type 2 that keeps solutions of upper bounds remaining at upper bounds, those of lower bounds at lower bounds, and those of intermediate values at intermediate values. For the cost coefficient, we present a method that the sensitivity analysis of Type 2 is solved by using the method of a sensitivity analysis of Type 1. Besides we also show that the results of sensitivity analysis of Type 2 are union set of those of Type 1 sensitivity analysis. For the right-hand side constant or the capacity, we present a simple method for the sensitivity analysis of Type 2 which uses arcs with intermediate values.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.209-217
• /
• 2006

The major continental blocks in NE-Asia are the North China Block and the South China Blo, which have collided, starting from the Korean peninsula. The suture zone in NE China between two blocks is well defined from the QinIing-Dabie-Orogenic Belt to the Jiaodong (Sulu) Belt by the geological and geophysical interpretation. The discovery of high pressure metamorphic rocks in the Hongsung area of the Korean peninsula can be used to estimate the suture zone. This indicates that the suture zone in the Jiaodong Belt might be extended to Hongsung area. However, due to the lack of geological and geophysical data over the Yellow sea, the extension of the suture zone to the Korean peninsula across the Yellow Sea is obscure. To find out the tectonic relationship between NE China and the Korean peninsula it is necessary to complete U-ie homogeneous geophysical dataset of NE Asia, which can be provided by satellite observations. The CHAMP lithospheric magnetic field (MF3) and CHAMP-GRACE gravity field, combined with surface measured data, allow a much more accurate in-ference of tectonic structures than previously available. The CHAMP magnetic anomaly map reveals significant magnetic lows in the Yellow Sea near Nanjing and Hongsung, where are characterized by gravity highs on U-ie CHAMP-GRACE gravity anomaly map. To evaluate the depth and location of poten-tial field anomaly causative bodies, the Euler Deconvolution method is implemented. After comparing the two potential field solutions with the simplified geological map containing tectonic lines and the distribution of earthquakes epicenters, it is found that the derived structure boundaries of both are well coincident with the seismic activities as well as with the tectonic lineaments. The interpretation of the CHAMP satellite magnetic and GRACE satellite gravity datasets reveal two tectonic boundaries in U-ie Yellow Sea and the Korean peninsula, indicating U-ie norttiern and southern margins of the suture zone between the North China Block and the South China Block. The former is extended from the Jiaodong Belt in East China to the Imjingang Belt on the Korean peninsula, the later from Nanjing, East China, to Hongsung, the Korean peninsula. The tectonic movement in or near the suture zone might be responsible for the seismic activities in the western region of the Korean Peninsula and the development of the Yellow Sea sedimentary basin.