• 약학회지
• /
• 제35권3호
• /
• pp.197-202
• /
• 1991

In order to study drug release from the suppository, three types of hollow suppositories and one conventional suppository were prepared using indomethacin(IDM) as a model drug and Witepsol H-15 as a base. The 4 types of suppository prepared are as follows: type I, conventional suppository containing 50 mg of IDM powder, type II, hollow supository containing 50 mg of IDM powder in the cavity, type III, hollow suppository containing 25 mg of IDM powder in the base and IDM microcapsules (25 mg as IDM powder) in the cavity, and type IV, hollow suppository containing IDM microcapsules (25 mg as IDM powder) in the base and 0.5 ml of 5%(w/v) IDM-PEG 300 solution in the cavity. The drug amount released(%) from type II and I within 24 hrs was 46.7% and 66.9%, respectively. Comparing with the drug amount released from four types of suppository within initial 2 hrs and 24 hrs, that of type IV was high as 32.7% and 76.6%, respectively. IDM-ethycellulose microcapsules passed through 270 mesh sieve and the IDM content was 20.95%.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1434-1440
• /
• 2015

IDM은 건설 프로젝트를 담당하는 각 전문분야의 업무 프로세스를 대상으로 정보교환의 시기 및 내용, 관련되는 IFC 객체 등을 정의하기 위한 개방형 정보전달 매뉴얼이다. 본 연구에서는 IDM 방법론을 통해 요구정보의 세부 정의 및 후속 프로세스로의 전달방법을 분석함으로써 BIM을 기반으로 철골부재의 단면설계를 수행하기 위한 정보모델을 정의하였다. 또한 현재 IFC에서 지원하는 구조정보를 분석하고 엑셀을 이용한 사례적용을 통해 그 타당성을 검증하였다. 분석 결과, BIM 기반 철골부재 단면설계를 위한 대부분의 구조정보는 현재 통용되고 있는 $IFC2{\times}3$에서 지원하는 엔터티와 Pset을 활용해 관리가 가능하였으며, $IFC2{\times}3$에서 지원하지 않는 소성단면계수 등 일부 정보는 IFC4에 보완돼 있음을 확인하였다. 이와같이 IDM 방법론은 BIM 기반 철골부재의 단면설계를 위한 프로세스 분석 및 교환정보의 구체화, 공통적 기능단위 정보의 정의에 효과적으로 활용할 수 있었다.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.509-518
• /
• 2019

A novel islanding detection method is proposed in this paper. It is based on a frequency drooping PLL, which was presented in a previous work. The cause of errors in the non-detection zone (NDZ) of conventional frequency disturbance islanding detection methods (IDM) is analyzed. A frequency drooping phase-locked-loop (FD-PLL) is introduced into a single-phase grid-connected inverter (SPGCI), which can guarantee that grid current is in phase with the grid voltage. A novel FD-PLL IDM is proposed by improving this PLL. In order to verify the performance of the proposed FD-PLL IDM, a full performance comparison between the proposed IDM and typical existing active frequency drift IDMs is carried out, which includes both dynamic performance and steady performance. With the same NDZ, the total harmonic distortion of the grid-current in the dynamic process and steady state is analyzed. The proposed FD-PLL IDM, regardless of the dynamic or steady process, has the best power quality. Experimental and simulation results verify that the proposed FD-PLL IDM has excellent performance.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.464-469
• /
• 2008

Information Delivery Manual (IDM) is a documentation format for capturing the information requirements among various AEC project tasks and their software uses. The authors analyzed the structural engineering and analysis domain and were able to define its process model definition and the information flow required for the process by following the methodology stated in the IDM format. The authors believe that The manual has its potentials for further enhancements for IFC-based process integration by transferring it into a information model schema, which can be later referenced by the software applications to automatically determine which data need to be exchanged.

• 한국CDE학회논문집
• /
• 제15권5호
• /
• pp.393-402
• /
• 2010

Existing construction industry is composed of several processes with various characteristics. The tendency of current construction industry is getting complicated and diversified; it has limitation to solve problems through existing processes. As a problem-solving method, BIM (Building Information Modeling), environment to manage building life cycle from design and construction to management, is being suggested. Currently, BIM is only focused on technology development by engineers, and the automation of architectural theories is insufficiency except architectural design modeling. Therefore, this research aims to back up theses drawbacks through intellectual curtain wall arrangement by using musical proportions. In order to apply to construction automation, analysised of musical proportions method are performed. The BPMN-based Process Map is listed to develop IDM for the application to BIM Software.

• 디지털콘텐츠
• /
• 11호통권126호
• /
• pp.160-166
• /
• 2003

모든 조직들이 엔터프라이즈 콘텐츠 매니지먼트(ECM)가 필요한 것은 아니다. 도큐랩스(Doculabs)는 통합문서관리(IDM)의 개요와 각종 비즈니스 문제들을 해결할 때의 IDM의 역할에 대해 재조명해본다.

• 약학회지
• /
• 제40권4호
• /
• pp.400-410
• /
• 1996

In oder to develop the controlled release of drugs from the suppositories, in vitro drug release and in vivo absorption in rabbits were investigated. Various suppo sitory forms with hollow cavities, into which drugs in the form of fine powder or solid dispersion system(SDS) could be placed, were utilized. The oleaginous Witepsol H-15 (WH-15) as a base, and indomethacin (IDM) of a very slightly soluble drug and propranolol-HCL (PPH) of a very soluble drug were employed as model drugs. The in vitro drug release showed that the cumulative release amount of PPH from PPH-(methylcellulose) MC-SDS and PPH-(ethylcellulose) EC-SDS hollow type suppositories reached 40% and 12% in 6 hrs,respectively. On the other hand, the drug release for a conventional suppository was 80% in 6 hrs. For the IDM suppositories,the cumulative drug release from IDM-(polyvinylpyrrolidone) PVP-SDS hollow type suppositories reached 99% in 24 hrs, whereas that from a conventional suppository reached 85%. An in vivo experiment with rabbits showed that IDM-PVP-SDS hollow type suppository delayed the absorption of IDM, significantly. The $t_{max},\;C_{max}\;and\;AUC_{0{\to}8}$ of IDM-PVP-SDS suppository were 60 min, 12.12${\mu}g$/ml and 2657${\mu}g$/ml/min, respectively. The $t_{max},\;C_{max}\;and\;AUC_{0{\to}8}$ of controlled group were 20 min, 15.49${\mu}g$/ml and 2190${\mu}g$/ml/min, respectively.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1467-1473
• /
• 2013

건설 프로젝트에서 각 전문분야의 작업은 해당 분야의 전문 소프트웨어에 의해 진행되므로 이를 통해 생성된 디지털 정보의 교환 및 공유가 업무 효율 향상을 위해 중요한 요소로 부각되고 있다. 이에 본 연구에서는 강구조건물 골조의 구조설계에서 발생하는 정보전달 요구를 IDM 방법론을 이용해 분석하였다. 강구조 골조 구조설계 과정의 단위업무를 설계단계별로 분석하고, 단위업무 사이에서 요구되는 정보를 도출하여 PM, ER 및 FP를 추출하였다. 이를 통해 강구조 골조 구조설계의 상세설계단계에서 구조적으로 중요한 비중을 차지하는 강구조 볼트접합 및 용접접합의 구조정보를 분석하고 이를 Pset으로 추가하여 새로운 ER과 FP로 제안하였다. 제안한 볼트접합 및 용접접합 ER과 FP를 강구조 표준접합상세의 기둥-보 강축접합 사례에 적용한 결과, 철골접합부 구조설계정보의 저장 및 IFC 파일을 통한 공유 및 교환에 유용하게 활용할 수 있음을 확인하였다.

• 한국ITS학회 논문지
• /
• 제20권4호
• /
• pp.13-27
• /
• 2021

본 연구에서는 영동고속도로 용인IC~양지IC구간을 대상으로 2020년 데이터를 활용하여 자율주행자동차의 시장점유율 변화가 교통류에 미치는 영향을 추정하였다. 교통류에 미치는 영향 정도를 추정하기 위해 미시교통시뮬레이션 모형인 VISSIM을 활용하였다. 자율주행자동차의 종방향 제어를 반영하기 위해서 intelligent driver model(IDM)을 구축 후 VISSIM에 적용하여 일반차와 비교를 수행하고 주행행태를 검증하였다. 자율주행자동차의 시장점유율에 따른 이동성 및 안전성 분석 결과, 자율주행자동차 도입 시 시장점유율이 높아질수록 네트워크의 이동성은 향상되지만, 안전성의 경우 차종이 혼재되었을 때 교통류가 불안정해지므로 더욱 안전 관리에 집중해야 한다는 것을 확인하였다.

• International Journal of Computer Science & Network Security
• /
• 제23권12호
• /
• pp.27-80
• /
• 2023

Nowadays usage of different applications of identity management IDM demands prime attention to clarify which is more efficient regarding preserve privacy as well as security to perform different operations concerning digital identity. Those operations represent the available interactions with identity during its lifecycle in the digital world e.g., create, update, delete, verify and so on. With the rapid growth in technology, this field has been evolving with a number of IDM models being proposed to ensure that identity lifecycle and face some significant issues. However, the control and ownership of data remines in the hand of identity service providers for central and federated approaches unlike in the self-sovereign identity management SSIM approach. SSIM is the recent IDM model were introduced to solve the issue regarding ownership of identity and storing the associated data of it. Thus, SSIM aims to grant the individual's ability to govern their identities without intervening administrative authorities or approval of any authority. Recently, we noticed that numerous IDM solutions enable individuals to own and control their identities in order to adapt with SSIM model. Therefore, we intend to make comparative study as much of these solutions that have proper technical documentation, reports, or whitepapers as well as provide an overview of IDM models. We will point out the existing research gaps and how this study will bridge it. Finally, the study will propose a technical enhancement, everKEY solution, to address some significant drawbacks in current SSIM solutions.