• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.7-12
• /
• 2019

Ambient backscatter communication is limited to channel estimation technique through a pilot signal, which is a channel estimation method in current RF communication, due to transmission power efficiency. In a limited transmission power environment, the research of traditional ambient backscatter communication has been studied assuming that it is an ideal channel without signal distortions due to channel conditions. In this paper, we propose an expectation-maximization(EM) algorithm, one of the blind channel estimation techniques, as a channel estimation method in ambient backscatter communication system which is the state of channel following normal distribution. In the proposed system model, the simulations confirm that channel estimate through EM algorithm is approaching the lower bound of the mean square error compared with the Bayesian Cramer-Rao Boundary(BCRB) to check performance. It shows that the channel parameter can be estimated in the ambient backscatter communication system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.306-306
• /
• 2019

전지구적 기온상승으로 인해 미래기후의 관한 연구가 중요시 되고 있다. 위와 같은 현상으로 인하여 다양한 기후변화 연구가 진행되고 있다. 미래기후 연구에는 GCM (General Circulation Model) 모의 결과가 이용된다. 격자 자료로 구성된 GCM은 연구 지점으로 지역적 상세화와 연구지역의 관측자료 사이의 편이 보정(bias correction)이 필수적이다. 위와 같은 근거로 편이 보정 방법의 선택은 매우 중요하며 편의 보정의 방법에 따라서 결과가 다르게 도출될 수 있다. 또한 국내외 연구에서는 다양한 상세화 기법과 편이 보정 기법을 분석 및 평가하는 연구가 진행되고 있으며, 편의 기법 중 대표적인 기법인 Quantile mapping과 Random Forest 기법이 있다. Quantile mapping 기법은 GCM의 과거 모의 데이터와의 편이 보정에 있어서 우수하게 나타났으나, GCM 데이터의 미래 예측 기간(2010년~2018년)까지의 데이터에서는 극한 강수를 정량적으로 분석 가능한 Random Forest 기법이 편이 보정 과정에서 성능이 우수할 것으로 판단된다. 본 연구에서는 우리나라 21개 관측소를 기준으로 총 4개의 GCM(GISS, CSIRO, CCSM4,MIROC5)의 과거 기간 자료(1970년~2005년)를 실제 관측소에서 관측된 강수량을 편의 보정하는 방법에 있어서 편의 보정 기법의 성능을 비교한 결과와 GCM 미래 예측 기간 자료(2010년~2018년)에서의 편의 보정 기법의 성능 결과를 비교하였다. 이를 토대로 편이 보정 기법의 결과를 6개의 평가지수를 이용하여 정량적으로 분석하였으며, 다기준의사결정기법인 TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution)를 이용하여 편이 보정기법들의 성능에 있어서 우선순위를 선정하였다. 본 연구에서 편이 보정 방법으로 Quantile mapping 방법을 사용했으며, Quantile mapping의 기법으로는 비모수 변환법(non-parametric transformation)과 분포기반 변환법(distribution derived transformation)이 사용되었다. 또한 머신러닝 방법 중 하나인 Random Forest 방법을 동시에 사용하여 결과를 비교하였다. 또한 GCM 자료가 격자식으로 제공하고 있기 때문에 관측소 강수량도 공간적으로 환산하여야 하는데, 본 연구에서는 역거리 가중치법(inverse distance weighting, IDW) 방법을 이용하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.264-264
• /
• 2015

최근 기후변화는 우리 삶에 다양한 영향을 미치고 있으며, 이에 따른 수문순환 변화 역시 자명하게 받아들이고 있다. 이에 따라 수자원 취약성 평가 및 대책에 관한 연구는 다양하게 진행되고 있는 실정이다. 하지만 국내의 경우 전체 유역에 대한 수자원 취약성 평가 연구는 부족한 실정이다. 따라서 본 연구에서는 국내 총 12 수계인 한강, 안성천, 금강, 삽교천, 영산강, 섬진강, 탐진강, 만경강, 동진강, 낙동강, 태화강, 형산강 유역에 대한 수자원 취약성 평가를 실시하였다. 평가 방법으로는 장기간에 걸친 다양한 토양의 특징, 토지이용, 관리상태의 변화에 따른 크고 복잡한 유역의 유출량을 추정하기 위해 개발된 SWAT(Soil and Water Assessment Tool) 모형을 이용하여 수문 모형을 구축하였고, 유출 관련 매개변수 최적화 작업은 SWAT-CUP 모형을 이용하였다. 최적화된 매개변수의 적용을 통해 각 유역별 유출량을 산정하였다. 그 결과 2009년과 2011년은 한강, 낙동강, 금강, 영산강순 이였으며, 2010년은 낙동강, 한강, 금강, 영산강순 이였다. 면적별 유출량인 비유량(specific discharge)을 산정한 결과, 2009년에는 영산강, 낙동강, 금강, 한강순 이며, 2010년에는 영산강, 금강, 낙동강, 한강순 이였으며, 2011년에는 금강, 한강, 영산강, 낙동강 순을 보였다. 또한, 인구당 유출량 산정 결과 2009년에는 영산강, 금강, 낙동강, 한강순 이며, 2010년에는 영산강, 금강, 낙동강, 한강순 이며, 2011년에는 영산강, 금강, 낙동강, 한강순 이었다. 이를 바탕으로 국내 총 12 수계에 대한 수자원 취약성을 산정해보았다. 대응변수는 이수의 수요 및 공급적인 측면에서 구분하였으며, 사회/경제, 물 이용, 환경, SWAT으로 구성하였습니다. 수자원 취약성 평가를 위해 다기준의사결정기법(MCDM, Multi-Criteria Decision Making) 중 하나인 TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution)기법을 사용하였다. 산정 결과 삽교천, 동진강, 형산강, 안성천, 섬진강, 만경강, 낙동강, 영산강, 태화강, 금강, 한강, 탐진강 순 이였다. 본 연구 결과는 향후 다중 공간에 구축한 고해상도 모형을 통해 국내 수문상황 진단 및 고해상도 미래 수문 시나리오 생산을 통한 수자원 관리에도 활용될 전망이며, 기후변화 취약성 평가를 위한 지표 개발에 이용될 예정이다.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3795-3802
• /
• 2022

NaI(Tl) scintillation materials are considered to be one of many materials that are used exclusively for γ-ray detection and spectroscopy. The gamma-ray spectrometer is not an easy-to-use device, and the accuracy of the numerical values must be carefully checked based on the rules of the calibration technique. Therefore, accurate information about the detection system and its effectiveness is of greater importance. The purpose of this study is to estimate, using an analytical-numerical formula (ANF), the purely geometric solid angle, geometric efficiency, and total efficiency of a cylindrical NaI(Tl) γ-ray detector with a side-through hole. This type of detector is ideal for scanning fuel rods and pipelines, as well as for performing radio-immunoassays. The study included the calculation of the complex solid angle, in combination with the use of various points like gamma sources, located axially and non-axially inside the through detector side hole, which can be applied in a hypothetical method for calibrating the facility. An extended γ-ray energy range, the detector, source dimensions, "source-to-detector" geometry inside the side-through hole, path lengths of γ-quanta photons crossing the facility, besides the photon average path length inside the detector medium itself, were studied and considered. This study is very important for an expanded future article where the radioactive point source can be replaced by a volume source located inside the side-trough hole of the detector, or by a radioactive pipeline passing through the well. The results provide a good and useful approach to a new generation of detectors that can be used for low-level radiation that needs to be measured efficiently.

• Medical Lasers
• /
• v.9 no.2
• /
• pp.159-165
• /
• 2020

Background and Objectives The ultimate goal in current skin rejuvenation practice is to achieve a good result with minimal pain and downtime. Nonablative skin rejuvenation (NSR) is one technique. The efficacy of the long-pulsed 1064 nm Nd:YAG laser (LPNDY) has not been assessed in NSR. Materials and Methods Three target areas were selected (bilateral cheeks and glabellar region) in six volunteer subjects. A LPNDY with an integral skin temperature monitor delivered three stacked shots to each target area (1064 nm, 12 mm spot, 13 J/cm², 1 Hz) without any skin cooling or anesthesia. The skin temperature was recorded before, during, and after each set of shots using the system monitor and in real-time using a high-sensitivity (±0.001℃) near-infrared video camera. The skin reaction was observed with the naked eye, and pain and discomfort were assessed by the subjects during and after treatment. Results The subjects reported a mild feeling of heat with no discomfort during or after the test treatments. Mild erythema was observed around the treatment areas, without noticeable edema. A series of three ascending skin temperature stepwise peaks, with a decrease in skin temperature towards the baseline after the third shot, was observed consistently. The mean temperatures for shots 1, 2, and 3 for the cheeks were 39.5℃, 42.0℃, and 44.4℃, respectively, and for the glabella, 40.8℃, 43.9℃, and 46.2℃, respectively. Similar ranges were indicated on the system integral temperature monitor. Conclusion A set of three stacked pulses with the LPNDY at a low fluence achieved ideal dermal temperatures to achieve some dermal remodeling but without any downtime or adverse events. The temperature data from the integral thermal sensor matched the video camera measurements with practical accuracy for skin rejuvenation requirements. These data suggest that LPNDY would satisfy the necessary criteria to achieve effective NSR, but further studies will be needed to assess the actual results in clinical practice.

• Journal of Veterinary Clinics
• /
• v.39 no.6
• /
• pp.311-318
• /
• 2022

Appropriate suture technique is crucial for successful tracheal anastomosis. However, standards for an ideal suture method have not yet been established. A previous study suggested tracheal anastomosis using barbed sutures that do not require knots; however, their use in small animals has not been reported. In this study, we aimed to compare knotless barbed sutures with conventional smooth sutures in terms of maximum tensile strength and suturing time in canine tracheal models to demonstrate the feasibility of using barbed sutures in tracheal anastomosis in dogs. Tracheal segments harvested from nine beagle dog cadavers were randomly assigned to three suture groups: barbed suture (B), smooth suture in simple interrupted pattern (SI), and smooth suture in simple continuous pattern (SC). The maximum tensile force and suturing time were compared according to the suturing method, and the mode of failure was evaluated. The average suturing time was 3.29 min in the B group; 4.41 min, SC group; and 8.99 min, SI group (p < 0.001). The average maximum tensile force in the SC group was 134.97 N, which was stronger than the SI (110.57 N) and B groups (103.10 N) (p < 0.05 and p < 0.01, respectively). The difference between the B and SI groups was not significant (p = 0.05). The B group demonstrated comparable mechanical strength and shorter suture time compared with the SI group. Therefore, tracheal anastomosis using barbed sutures could be an effective alternative to conventional smooth sutures in dogs.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.101-109
• /
• 2009

An encryption module is equipped basically at 8i version ideal of Oracle DBMS, encryption module, but a performance decrease is caused, and users are restrictive. We analyze problem of DB security by technology by circles at this paper whether or not there is an index search, object management disorder, a serious DB performance decrease by encryption, real-time data encryption beauty whether or not there is data approach control beauty circular-based IP. And presentation does the comprehensive security Frame Work which utilized the DB Masking technique that is an alternative means technical encryption in order to improve availability of DB security. We use a virtual account, and set up a DB Masking basis by security grades as alternatives, we check advance user authentication and SQL inquiry approvals and integrity after the fact through virtual accounts, utilize to method as collect by an auditing log that an officer was able to do safely DB.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.1
• /
• pp.99-108
• /
• 2022

This study measured the importance and satisfaction of the values related to 'New Ruralism' using the IPA(Importance-Performance Analysis) technique by the rural leaders' group. In the result, the satisfaction value was evaluated lower in the importance of 'landscape and ecological resource conservation', 'settlement environment', and 'population' related items. On the other hand, the items of 'tourism resource management', 'landscape damage', and 'landscape and ecological resource conservation' showed high satisfaction. Therefore, the leaders' group of Gochang-gun perceived the importance of local tourism image, landscape damage prevention, settlement environment, and rural landscape in 'New Ruralism' management. However, the leaders' group valued lower in the items of population, ecological value and natural and historical tourist sites. This seems to be a characteristic of the leaders' group mainly engaged in agriculture. Through factor analysis, the six items excluded from the analysis were considered important factors in 'New Ruralism' in Gochang-gun through a review of previous studies. Still, the leaders' group of Gochang-gun did not recognize them as important items in the rural resource. However, these items will be able to contribute to the development of 'New Ruralism' in Gochang-gun, and it is necessary to improve the awareness of the leader group. Even if local governments or experts present an ideal goal for rural development, it is difficult to achieve the goals if there is a difference from the perception of residents. Therefore, it is important to understand the perception of 'New Ruralism' of the leaders' group who plays an important role in regional development projects.

• Smart Structures and Systems
• /
• v.29 no.5
• /
• pp.661-675
• /
• 2022

In this paper, an electric vehicle drives with efficient control and low cost hardware using four quadrant DC converter with Permanent Magnet Direct Current (PMDC) motor fed by DC boost converter is presented. The main idea of this work is to improve the energy efficiency of the conversion chain of an electric vehicle by inserting a boost converter between the battery and the four quadrant-DC motor chopper assembly. Consequently, this method makes it possible to maintain the amplification gain of the 4 quadrant chopper constant regardless of the battery voltage drop and even in the presence of a fault in the battery. One of the most important control problems is control under heavy uncertainty conditions. The higher order sliding mode control technique is introduced for the adjustment of DC bus voltage and mechanical motor speed. To implement the proposed approach in the automotive field, experimental tests were carried out. The performances obtained show the usefulness of this system for a better energy management of an electric vehicle and an ideal control under different operating conditions and constraints, mostly at nominal operation, in the presence of a load torque, when reversing the direction of rotation of the motor speed and even in case of battery chamber failure. The whole system has been tested experimentally and its performance has been analyzed.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.15-24
• /
• 2024

One of the most significant issues in combinatorial optimization is the classical NP-complete conundrum known as the 0/1 Knapsack Problem. This study delves deeply into the investigation of practical solutions, emphasizing two classic algorithmic paradigms, brute force, and dynamic programming, along with the metaheuristic and nature-inspired family algorithm known as the Genetic Algorithm (GA). The research begins with a thorough analysis of the dynamic programming technique, utilizing its ability to handle overlapping subproblems and an ideal substructure. We evaluate the benefits of dynamic programming in the context of the 0/1 Knapsack Problem by carefully dissecting its nuances in contrast to GA. Simultaneously, the study examines the brute force algorithm, a simple yet comprehensive method compared to Branch & Bound. This strategy entails investigating every potential combination, offering a starting point for comparison with more advanced techniques. The paper explores the computational complexity of the brute force approach, highlighting its limitations and usefulness in resolving the 0/1 Knapsack Problem in contrast to the set above of algorithms.