• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.6
• /
• pp.239-246
• /
• 2014

Many kinds of membrane have been used for the guided bone regeneration (GBR) technique. However, most membranes do not fulfill all requirements for the ideal membrane for the GBR technique. Among them, collagen membrane has been most widely used. However, its high price and weak tensile strength in wet condition are limitations for wide clinical application. Synthetic polymers have also been used for the GBR technique. Recently, silk based membrane has been considered as a membrane for the GBR technique. Despite many promising preclinical data for use of a silk membrane, clinical data regarding the silk membrane has been limited. However, silk based material has been used clinically as vessel-tie material and an electrospun silk membrane was applied successfully to patients. No adverse effect related to the silk suture has been reported. Considering that silk membrane can be provided to patients at a cheap price, its clinical application should be encouraged.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.642-642
• /
• 2015

최근 지속가능한 개발을 위한 연구와 수자원 취약성에 대한 논의가 활발히 이루어지는 가운데, 북한의 수자원에 대한 관심 또한 증가하여 다방면으로 연구가 진행되고 있다. 본 연구는 북한 자료의 확보가 가능한 World Bank 자료를 바탕으로 Pressure-State-Response 구조에 따라 선정된 14개의 지표를 이용하여 168개 국가를 대상으로 수자원 취약성 분석을 수행하였다. 의사결정을 위한 가중치 결정은 객관적 가중치 산정방법인 Shannon의 entropy 기법을 이용하였으며, 정량적 평가를 위하여 TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) 기법을 적용하여 국가 별 수자원 취약성을 지수화하고 취약성 순위를 도출하였다. 각 지표별 Positive Ideal Solution과 Negative Ideal Solution의 거리를 산정한 후 상대근접도계수를 산정하였으며, 상대근접도계수가 작은 국가일수록 수자원이 취약한 국가가 된다. 연구결과 북한은 168개 국가 중 17위, 우리나라는 67위로 나타났으며, 대체적으로 남 북한의 수자원 취약성이 취약한 가운데 북한이 더 취약한 것으로 나타났다. 우리나라와 연관이 깊은 주요 국가와 비교 시, 북한, 중국, 미국, 일본, 우리나라 순으로 취약성의 정도가 심각했다. 또한, 압력, 상태, 반응의 요소별로 수자원 취약성을 분석한 결과 북한이 반응요소 측면에서 타 국가에 비해 불안정하였으며, 우리나라의 경우 상태요소 측면에서 취약함을 보였다. 따라서 본 연구는 국가 간 우리나라와 북한의 상황을 파악할 수 있게 해주며, 수자원 취약성 극복을 위한 수자원 계획 및 대책을 제시할 수 있는 자료로 활용할 수 있을 것이다.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2009

In Taguchi's quadratic expected loss function used as robustness metric of performance characteristics, the mean and variance contributions are confounded. The consolidation of the mean and variance in the expected loss function may not always be the ideal approach. This paper presents a procedure for multi-attributes design optimization, where the mean and variance of performance characteristics are considered as separate attributes having designer's relative preferences for them and Technique for Order Preference by Similarity to Ideal Solution(TOPSIS) is introduced to attain robust optimal design. The effectiveness of proposed approach is shown with an example of a weld line minimization problem in the injection molding process.

• Journal of Digestive Cancer Research
• /
• v.4 no.2
• /
• pp.77-82
• /
• 2016

The 26^th World Congress of the International Association of Surgeons, Gastroenterologists and Oncologists (IASGO) was held in Seoul, Korea from September 8 to 10, 2016. In this congress, I gave a State-of-the-Art Lecture II entitled "Mesenteric Approach in Pancreatoduodenectomy." The ideal surgery for pancreatic head cancer is isolated pancreatoduodenectomy, which involves en bloc resection using a non-touch isolation technique. My team has been developing isolated pancreatoduodenectomy for pancreatic cancer since 1981, when we developed an antithrombogenic bypass catheter for the portal vein. In this operation, the first and most important step is the use of a mesenteric approach instead of Kocher's maneuver. The mesenteric approach allows dissection from the non-cancer infiltrating side and determination of cancer-free margins and resectability, followed by systematic lymphadenectomy around the superior mesenteric artery. This approach enables early ligation of the inferior pancreatoduodenal artery and total mesopancreas excision. It is the ideal surgery for pancreatic head cancer from both oncological and surgical viewpoints. The precise surgical techniques of the mesenteric approach are herein described.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.157-166
• /
• 2003

This paper deals with the problem of channel identification for Single Input Multiple Output (SIMO) slow fading channels using clustering algorithms. Due to the intrinsic memory of the discrete-time model of the channel, over short observation periods, the received data vectors of the SIMO model are spread in clusters because of the AWGN noise. Each cluster is practically centered around the ideal channel output labels without noise and the noisy received vectors are distributed according to a multivariate Gaussian distribution. Starting from the Markov SIMO channel model, simultaneous maximum ikelihood estimation of the input vector and the channel coefficients reduce to one of obtaining the values of this pair that minimizes the sum of the Euclidean norms between the received and the estimated output vectors. Viterbi algorithm can be used for this purpose provided the trellis diagram of the Markov model can be labeled with the noiseless channel outputs. The problem of identification of the ideal channel outputs, which is the focus of this paper, is then equivalent to designing a Vector Quantizer (VQ) from a training set corresponding to the observed noisy channel outputs. The Linde-Buzo-Gray (LBG)-type clustering algorithms [1] could be used to obtain the noiseless channel output labels from the noisy received vectors. One problem with the use of such algorithms for blind time-varying channel identification is the codebook initialization. This paper looks at two critical issues with regards to the use of VQ for channel identification. The first has to deal with the applicability of this technique in general; we present theoretical results for the conditions under which the technique may be applicable. The second aims at overcoming the codebook initialization problem by proposing a novel approach which attempts to make the first phase of the channel estimation faster than the classical codebook initialization methods. Sample simulation results are provided confirming the effectiveness of the proposed initialization technique.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.43.1-43.9
• /
• 2020

A variety of therapeutic modalities can be used for the endodontic treatment of a traumatized tooth with internal root resorption (IRR). The authors present a case report of the successful restoration of a traumatized upper central incisor that was weakened due to severe IRR and subsequent periapical lesion formation. A 20-year-old female patient was referred to our clinic with severe internal resorption and subsequent periapical pathosis destroying the buccal bone wall. Root canal treatment had been initiated previously at another dental practice, but at that time, the patient's condition could not be managed even with several treatments. After cone-beam computed tomography imaging and proper chemomechanical cleaning, the tooth was managed with a mineral trioxide aggregate plug followed by root canal filling using short fiber-reinforced composite, known as the Bioblock technique. This report is the first documentation of the use of the Bioblock technique in the restoration of a traumatized tooth. The Bioblock technique appears to be ideal for restoring wide irregular root canals, as in cases of severe internal resorption, because it can uniquely fill out the hollow irregularities of the canal. However, further long-term clinical investigations are required to provide additional information about this new technique.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.69-75
• /
• 2000

A new frame synchronization confirmation technique using a pilot pattern of both uplink and downlink channels is proposed for W-CDMA (Wideband Code Division Multiple Access) system. It is shown that by using this technique, we can cancel the side lobe for autocorrelation functions of the frame synchronization words of pilot pattern have the maximum to-of-phase autocorrelation value "4" with two peak values equal in magnitude and opposite in polarity at zero and middle shifts. Due to this side lobe cancellation effect, therefore, the autocorrelation function of the frame synchronization words becomes ideal for the frame synchronization confirmation since double maximum correlation values equal in magnitude and opposite polarity at zero ad middle shifts can be achieved. This property can be used to double check frame synchronization timing and thus. improve the frame synchronization confirmation performance.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.535-539
• /
• 1989

A high-frequency asymmetrical PWM control technique is proposed which can improve the input power factor of ac chopper and also suppress its harmonic contents of currents at both its input and load sides and the acoustic noises by its switching semiconductor devices. The ideal switching function for the proposed technique is derived and hence converted into asymmetrical PWM pattern for practical implementation of ac voltage regulator. Also the various power circuits of three phase AC choppers are suggested. The theoretical characteristics of the proposed PWM technique are investigated by digital simulation.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.122-128
• /
• 2007

In this paper, a method of station keeping strategy using relative orbital motion and numerical optimization technique is presented for geostationary satellite. Relative position vector with respect to an ideal geostationary orbit is generated using high precision orbit propagation, and compressed in terms of polynomial and trigonometric function. Then, this relative orbit model is combined with optimization scheme to propose a very efficient and flexible method of station keeping planning. Proper selection of objective and constraint functions for optimization can yield a variety of station keeping methods improved over the classical ones. Nonlinear simulation results have been shown to support such concept.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.26-36
• /
• 1999

A general procedure for determining the optimum location of suspension hard points with respect to kinematic design parametes is presented. Suspensions are modeled as connection of rigid bodies by ideal kinematic joints. Constraint equations of the kinematic joints are expressed in terms of the generalized coordinates and hard points. By directly differentiating the constraint equations with respect to the hard points, kinematic sencitivity equations are obtained. In order to cope with algebraic complexity associated with the differentiation process, a symbolic computation technique is used. A performance index is defined in terms of static design parameters such as camber, caster, toe, ect.. Gradient of the performance index can be analytically computed from the kinematic sensitivity equations. Optimization results show the effectiveness and validity of the procedure, which is applicable to any type of suspension if its kinematic configurations are given.