• Journal of Information Technology Applications and Management
• /
• v.25 no.3
• /
• pp.43-54
• /
• 2018

In recent years, international cooperation has become important not only at the humanitarian level but also at the socio-economic level. As a result, major foreign countries are increasing capital-intensive international cooperation. In this environment, Korea needs to look for differentiated international cooperation plans centered on sustainable talent cultivation and move away from capital-based international cooperation. In this study, we analyzed the case of HRD (Human Resource Development) center in Cambodia as an international cooperation model between industry-academia-college for training software (SW) workforce. The HRD Center in Cambodia is an educational institution that fosters SW talent and can be viewed as an international cooperation model that can influence the ICT industry in Cambodia as an educational platform. In fact, 190 people who have been hired so far have entered various fields. 97% of graduates have been satisfied with HRD center and 90% of them are willing to recommend the center. In particular, as highlighted in the case study, the HRD Center has had a positive effect on not only cultivating self-initiated learning-based SW talent, but also formulating positive image of Korea and Korean companies thereby facilitating entry into the global market. The HRD Center in Cambodia has developed a virtuous cycle of fostering human resources, providing education, advancing industry and building a cooperative network. Korea has transformed into a platform for international cooperation and human resource development and education by providing active support and aid. This case study will be utilized as a new model of international cooperation with SW expert training platform for Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.185-198
• /
• 2017

Since the year 2000, the growth rate of domestic manufacturing has declined and the sales and employment have decreased. Major developed countries have established a variety of strategies to strengthen their manufacturing competitiveness, and promote manufacturing innovation through the convergence of technology and ICT. The key to manufacturing innovation is to reduce the time and cost for developing new products using modeling and simulation (M&S) technology in the product design stage. M&S industries, which belong to the top sector of the industry value chain, have a huge ripple effect across other industries. On the other hand, the competitiveness of the domestic M&S industry is weak compared to developed countries and even the definition and classification of domestic M&S companies have not been made. In this paper, by analyzing the Korea Standard Industry Classification (KSIC), five fine industry classifications included in M&S service companies were derived. In addition, the 307 M&S service companies were derived in accordance with the selection procedure of 3 steps from the 11,822 related companies. To analyze the capabilities of domestic M&S service companies, the current status of the selected M&S service companies was investigated. Considering the Korean economy's high dependence on the manufacturing industry, strengthening the competitiveness of manufacturing industry is required by enhancing the capacities and building an ecosystem in domestic M&S services for future sustainable economic growth.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.151-162
• /
• 2020

Education is one of the priority sectors specified in Tanzania, and it has committed to provide 11 years of compulsory free basic education for all from pre-primary to lower secondary level. Despite the Government's efforts to provide free basic education to all children, there are 2.0 million (23.2 per cent) out of 8.5 million children at the primary school age of 7-13, who are out of school in Tanzania. The ICT class should be offered as a regular class in all secondary schools in Tanzania, recommended by the ministry of education. However, many schools are struggling to implement this mandate. Most of schools offer the ICT class with theory without any real hardware. Some schools were given with computers but they were not maintained for operation. There is a huge task to make ICT education universal. Main issues include: remoteness (off-grid area), lack of ICT teachers, lack of resources such as hardware, infrastructure, and lack of practical lessons or projects to be used at schools. An innovative blended ICT/STEM education program is being conducted not only for Tanzanian public and private/international schools, but also for out-of-school adolescents through institutions, NGO centers, home visits and at the E3 Empower academy center. For effective STEM education to take place and remain sustainable, more practical curriculum, and close-up teacher support need to be accompanied concurrently. Practical, project-based simple coding lessons have been developed and employed that students experience true learning. The effectiveness of the curriculum has been demonstrated in various project centers, and it showed that students are showing new interests in exploring new discovery, even though this was a totally new area for them. It has been designed for an easy replication, thus students who learned can repeat the lessons themselves to other students. The ultimate purpose of this project is to have IT education offered as universally as possible throughout the whole Tanzania. Quality education for all children is a key for better future for all. Previously it was hoped that education with discipline will improve the active learning. But now more than ever, we believe that children have the ability to learn on their own with given proper STEM education tools, guidelines and environment. This gives promising hope to all of us, including those in the developing countries.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.200-205
• /
• 2017

In this paper, we propose a technique to determine the normal and arc of an alternating current using a mixed filter composed of an average filter and a band-pass filter and a frequency analysis. The proposed method uses the moving average filter of the FIR filter structure for noise removal and the band-pass filter of the IIR filter structure for detecting only specific frequency components after normalizing the measured current signal based on the maximum value. After performing Fast Fourier Transform (FFT) using the band-pass filtered signal, the total energy is calculated using the magnitude component of the frequency, and the arc is detected using the magnitude of the calculated energy. In order to show the validity of the proposed method, we experimented with various data and found that arc and steady state can be easily discriminated by calculating spectral energy. Therefore, it is considered that the proposed method can be applied to arc diagnosis of low voltage electric wire.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.336-344
• /
• 2017

This paper presents the three-port DC-DC converter modeling and controller design procedure, which is part of the solid-state transformer (SST) to interface medium voltage AC grid to bipolar DC distribution network. Due to the high primary side DC link voltage, the proposed converter employs the three-level neutral point clamped (NPC) topology at the primary side and 2-two level half bridge circuits for each DC distribution network. For the proposed converter particular structure, this paper conducts modeling the three winding transformer and the power transfer between each port. A decoupling method is adopted to simplify the power transfer model. The voltage controller design procedure is presented. In addition, the output current sharing controller is employed for current balancing between the parallel-connected secondary output ports. The proposed circuit and controller performance are verified by experimental results using a 30 kW prototype SST system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.2
• /
• pp.95-101
• /
• 2017

A simple and practical voltage balance method for a solid-state transformer (SST) is proposed to reduce the voltage difference of cascaded H-bridge converters. The tolerance device components in SST cause the imbalance problem of DC-link voltage in the H-bridge converter. The Max/Min algorithms of voltage balance controller are merged in the controller of an AC/DC rectifier to reduce the voltage difference. The DC-link voltage through each H-bridge converter can be balanced with the proposed control methods. The design and performance of the proposed SST are verified by experimental results using a 30 kW prototype.

• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.435-443
• /
• 2018

Climate technology applied to address climate change requires a comprehensive review such as environmental and social acceptability in addition to economic feasibility. Not only mitigation and adaptation technologies, but also integration of climate technologies into a business model with other relevant technologies including ICT, finance, and policy instruments could enhance technical, economic, and environmental performances to respond to climate changes. However, many climate projects (and business models) are currently not designed to consider adequately complex climate?related issues. In addition, there is a lack of research on assessment systems that can comprehensively evaluate business feasibility of such models. In this study, we developed a system consisting of nine major indicators in four fields to assess climate technology-based business models. Each indicator was weighed using the analytic hierarchy process (AHP) for systematic assessment of business models. The process can be utilized as a tool to guide improvement of climate technology business models.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.235-242
• /
• 2021

Unmanned Aerial Vehicles (UAVs), which were used for military purposes, are gradually expanding their application fields under the influence of electrification and digitalization. Starting from the field of aerial imaging and Intelligence Surveillance and Reconnaissance (ISR) mission, nowadays the possibility of Urban Air Mobility (UAM), which transports passengers and cargo with drones, is widely under discussion. In order to occupy the rapidly growing global unmanned aerial vehicle market in advance, it is necessary to secure core technologies and develop key UAVs components based on the new technologies. In the navigation field, it is necessary to secure a precise position with guaranteed reliability and continuity, unrelated to the operating environments. The reliability and continuity should be secured in the algorithm level and in the H/W component levels also. In order to achieve this technical goal, the Ministry of Science and ICT has launched the 'Unmanned Vehicle Core Technology Research and Development Program' in 2019 to support the R&D on the unmanned vehicle technologies. In this paper, authors introduce the unmanned vehicle core technology research and development program to the related researchers. The authors summarize the backgrounds of the program and show the technological tasks and objectives on the sub-programs in the unmanned vehicle navigation program. We present the program schedules especially focused on the test and evaluation of the developed technologies and components.

• Journal of Information Science Theory and Practice
• /
• v.10 no.spc
• /
• pp.76-85
• /
• 2022

At the 8th National High-Performance Computing (HPC) Committee convened in 2021, the "National High-Performance Computing Innovation Strategy (draft) for the 4th Industrial Revolution Era" was deliberated and the original draft was approved. In this proposal, the Ministry of Science and ICT in KOREA announced three major plans and nine detailed projects with the vision of "Realizing the 4th industrial revolution quantum jumping by leaping into a high-performance computing powerhouse." Thereby the most important policy about national mid-term and long-term HPC development was established and called the HPC innovation strategy (hereinafter "the innovation strategy"). The three plans of the innovation strategy proposed by the government are: Strategic HPC infrastructure expansion; Secure source technologies; and Activate innovative HPC utilization. Each of the detailed projects has to be executed nationally and strategically. In this paper, we propose a strategy for the implementation of two items ("Strategic HPC infrastructure expansion" and "activate innovative HPC utilization") among these detailed plans.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.3
• /
• pp.1-13
• /
• 2020

Objective : The purpose of this study is to present an analysis model in developing an inclusive response for safety hazards and disaster preventive information system for vulnerable people to the disaster including persons with disabilities, and those with specific needs. Methods : In this study, the persona analysis method is used to analyze fictitious characters that correspond to various characteristics such as age, disability, environment, occupation, etc. in terms of the scenario of some particular disaster subjects. Based on the user's communication problems derived from the persona analysis, focused group interview and ICF based analysis were implemented to identify needs and arbitration methods. Results : The needs from persona analysis and ICF-based communication items analysis identifies the factors that make each fictitious character difficult in terms of communication in obtaining the benefits consistent with the purpose of the service. The study derives service requirements that can provide arbitration or facilitation methods to increase communication ability of the users. Conclusion : Through the persona analysis method, difficulties that could occur when receiving disaster information using communication devices were identified and analyzed in conjunction with communication problems described in the ICF. In building information services for the prevention of safety hazards and disasters, this study presented a model that uses the persona analysis method and the ICF classification system to derive user requirements for accessible information system.