• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.394-399
• /
• 2016

The silicon dioxide ($SiO_2$) was deposited using various gas as oxygen and nitrous oxide ($N_2O$) in nowadays. In order to improve electrical characteristics and the interface state density ($D_{it}$) in low temperature, It was deposited with carbon dioxide ($CO_2$) and silane ($SiH_4$) gas by inductively coupled plasma chemical vapor deposition (ICP-CVD). Each $D_{it}$ of $SiO_2$ using $CO_2$ and $N_2O$ gas was $1.30{\times}10^{10}cm^{-2}{\cdot}eV^{-1}$ and $3.31{\times}10^{10}cm^{-2}{\cdot}eV^{-1}$. It showed $SiO_2$ using $CO_2$ gas was about 2.55 times better than $N_2O$ gas. After 10 years when the thin film was applied to metal/insulator/semiconductor(MIS)-nonvolatile memory(NVM), MIS NVM using $SiO_2$($CO_2$) on tunneling layer had window memory of 2.16 V with 60% retention at bias voltage from +16 V to -19 V. However, MIS NVM applied $SiO_2$($N_2O$) to tunneling layer had 2.48 V with 61% retention at bias voltage from +20 V to -24 V. The results show $SiO_2$ using $CO_2$ decrease the $D_{it}$ and it improves the operating voltage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.371.1-371.1
• /
• 2014

반도체 트랜지스터의 크기가 점점 미세화 함에 따라 이에 수반되는 절연막에 대한 요구 조건도 까다로워지고 있다. 특히 게이트 산화 막의 두께는 10 nm 이하에서 고밀도를 갖는 높은 유전율 막에 대한 요구가 증가되고 있으며 또한 증착 온도 역시 낮아져야 한다. 이러한 요구사항을 충족하는 기술중의 하나는 매우 낮은 압력 및 200도 이하 저온에서 절연막을 증착하는 것이다. 본 연구에서는 플라즈마 화학 기상 증착(PE-CVD) 시스템을 이용하여 $180^{\circ}C$의 온도 및 10 mTorr의 압력에서 SiN 및 SiCN 박막을 제조하였다. 박막의 특성은 원자층 증착 공정 결과와 유사하면서 증착 속도의 향상을 위해 개조된 사이클릭 화학 기상 증착 공정을 이용하였다. Si 전구체와 산화제는 기판에 공급되기 전에 혼합되어 1차 리간드 분해를 하였으며, 리간드가 일부 제거된 가스가 기판에 흡착되는 구조이다. 기판흡착 후 플라즈마 처리 공정을 이용하여 2차 리간드 분해 공정을 수행하였으며, 반응에 참여하지 않은 가스 제거를 위해 불활성 가스를 이용하여 퍼지 하였다. 공정 변수인 플라즈마 전력, 반응가스유량, 플라즈마 처리 시간은 최적화 되었다. 또한 효율적인 리간드 분해를 위해 ICP와 CCP를 포함하고 있는 이중 플라즈마 시스템에 의해 2회에 걸쳐 분해되어지고, 그 결과로 불순물이 들어있지 않는 순수한 SiN과 SiCN 박막을 증착하였다. XRD 측정 결과 증착된 박막들은 모두 비정질 상이며, 550 nm 파장에서 측정한 SiN 및 SiCN 박막의 굴절률은 각 각 1.801 및 1.795이다. 또한 증착된 박막의 밀도는 2.188 ($g/cm^3$)로서 유전체 박막으로 사용하기에 충분한 값임을 확인하였다. 추가적으로 300 mm 규모의 Si 웨이퍼에서 측정된 비 균일도는 2% 이었다. 저온에서 증착한 SiN 및 SiCN 박막 특성은 고온 공정의 그것과 유사함을 확인하였고, 이는 저온에서의 유전체 박막 증착 공정이 반도체 제조 공정에서 사용 가능하다는 것을 보여준다.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.115-119
• /
• 2011

A tip-type carbon nanotube(CNT)-based field emitter was studied to consider it as electron source for micro-focused x-ray tube. The CNT was grown directly on a metal (tungsten) substrate by using an inductively coupled plasma-chemical vapor deposition (ICP-CVD) method. Prior to CNT growth, the metal substrate was etched to have various tip angles from $10^{\circ}$ to $180^{\circ}C$ (flat-type). The morphologies and microstructures of all the grown CNTs were analyzed via field-emission SEM. Furthermore, the effects of substrate tip-angles on the emission properties of CNT-based field emitters were characterized to estimate the maximum current density, the turn-on voltage, and the spatial distribution of electron beams. Prolonged long-term stability testing of the CNT emitters was also performed. All the experiment results obtained from this study indicated why a tip-type CNT emitter, compared with a flat-type CNT emitter, would be more desirable for a micro-focused x-ray system, in terms of the emission current level, the focused beam area, and the emission stability.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1269-1270
• /
• 2007

Carbon nanotubes (CNTs) are directly grown on W-tips at $700^{\circ}C$ using an ICP-CVD method. Sharpening of W-tip is done by electrochemical etch and their diameters are limited to range from $3{\mu}m$ to $5{\mu}m$. Catalysts for CNTs growth are formed by RF and DC co-sputtering systems using Ni and Co. The composition ratio of Ni and Co has been evaluated by energy dispersive x-ray spectroscopy (EDS). The micro-images of CNTs are monitored by field emission scanning electron microscope (FESEM). It is observed from Raman study that the intensity of the D-peak is increased by increasing the amount of Co catalyst. Furthermore, the measurement of field emission properties of CNTs show that the CNT grown on a single Co catalyst possess the greatest performance such as $V_{th}$=1,115V and $I_{max}=164{\mu}A$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4468-4472
• /
• 2010

SiOC films made by the inductively coupled plasma chemical vapor deposition were researched the relationship between the dielectric constant and the chemical shift. SiOC film obtained by plasma method had the main Si-O-C bond with the molecule vibration mode in the range of $930{\sim}1230\;cm^{-1}$ which consists of C-O and Si-O bonds related to the cross link formation according to the dissociation and recombination. The C-O bond originated from the elongation effect by the neighboring highly electron negative oxygen atoms at terminal C-H bond in Si-$CH_3$ of $1270cm^{-1}$. However, the Si-O bond was formed from the second ionic sites recombined after the dissociation of Si-$CH_3$ of $1270cm^{-1}$. The increase of the Si-O bond induced the redshift as the shift of peak in FTIR spectra because of the increase of right shoulder in main bond. These results mean that SiOC films become more stable and stronger than SiOC film with dominant C-O bond. So it was researched that the roughness was also decreased due to the high degree of amorphous structure at SiOC film with the redshift after annealing.