• 한국결정성장학회지
• /
• 제21권5호
• /
• pp.218-224
• /
• 2011

저열팽창 특성을 갖는 난소결 물질인 LAS($Li_2O-Al_2O_3-SiO_2$)계를 고상 소결로 제조하였다. LAS계의 ${\beta}$-spodumene($Li_2O-Al_2O_3-4SiO_2$) 조성에 소결 조제로 $CaCO_3$를 첨가하였고, 강도 증가를 위하여 $ZrO_2$를 첨가하였다. 첨가제의 양의 변화와 소결 온도의 변화에 따른 소결 특성, 미세 구조, 기계적 특성 및 열팽창 특성에 대하여 조사하였다. 0.1 mol%의 $CaCO_3$을 첨가하였을 때, 치밀화가 증진됨을 미세구조 관찰에 의해 확인하였으며, $ZrO_2$의 첨가로 강도가 증진됨을 확인하였다. Dilatometer로 측정한 열팽창 계수는 선택된 전 조성에서 값이 $1.2{\sim}1.7{\times}10^6/^{\circ}C$임을 확인하였다.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.184-189
• /
• 2014

Electric arc furnace dust (EAFD) is a solid waste generated by the steel-scrap recycling process. It mainly consists of zinc oxides (ZnO), alumina ($Al_2O_3$), iron oxides ($Fe_2O_3$), and silica ($SiO_2$). Here we report the preparation and characterization of blue ceramic pigments using EAFD powder as a starting material. $(Zn(EAFD),Co)Al_2O_4$ blue ceramic pigment was prepared by the solid-state reaction method. The color characteristics of the pigment obtained were compared with those of pure $CoAl_2O_4$. The new pigment was characterized using XRD, CIE-$L^*a^*b^*$ color-measurements, SEM, and EDX. The XRD analysis revealed that the $(Zn(EAFD),Co)Al_2O_4$ pigment was composed of mainly the spinel phase of $(Zn,Co)Al_2O_4$. The $Zn(EAFD)_{0.25}Co_{0.75}Al_2O_4$ pigments showed a vivid blue color with a $b^*$ value of -28.64 and a good glaze stability with a transparent glaze.

• 한국식생활문화학회지
• /
• 제22권2호
• /
• pp.185-190
• /
• 2007

The purpose of this study was to investigate the recognition and the perception for succession and development on Ge-Geol radish that has been grown in Icheon area. A total of 385 (male 118, female 267) aged over 20 years who lived in Icheon area were investigated from May to June 2006. Seventy five percent of the total subjects were recognized Ge-Geol radish, and only the 40.8% of them were recognized as regional special agriproduct exactly. And the rate of the subjects who had experience to eat Ge-Geol radish was just 40.8%. While preferences on Ge-Geol radish were relatively high among the subjects who have experience to eat. Reasons for liking were 'distinctive (43.8%)', 'eat from a child (24.5%)', 'tasty (15.1%)', and 'nutritious(8.3%)'. Reasons for disliking were 'rough texture (54.8%)', 'tasteless (9.7%)', 'unique smell (9.7%)', 'undesirable color (6.5%)', and 'indistinctive (6.5%)'. Also, most of the subjects considered the need for the succession and the development of Ge-Geol radish. Therefore, for expanding utilization of Ge-Geol radish, it should be contacted easily from a child and be developed as products suited to the consumer's needs by various cooking and processing methods.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.67-71
• /
• 2013

Recently, the rapid development of the semiconductor industry induces the prompt technical progress in the area of device integration and the application of large diameter wafers for the price competitiveness. As a result of the usage of large wafers in the semiconductor industry, the silicon carbide components which have layers of silicon carbide on graphite or RBSC substrates is getting widely used due to the advantages of SiC such as high hardness and strength, chemical and ionic resistant to all the environments superior than other ceramic materials. For the uniform and homogeneous deposition of silicon carbide on these huge components, it needs to know about the gas flow in the CVD reactor, not only for the delicate adjustment of the process variables but more essentially for the cost reduction for the shape change of specimens and their holders on the stage of reactor. In this research, the CFD simulation is challenged for the prediction of the inner distribution of the gas velocity. Chemical reaction simulation is used to predict the distribution of concentration of the reacting gas with the rotating velocity of the stage. With the increase of the rotating speed, more uniform distribution of the reacting gas on the surface of the stage was obtained.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.33-40
• /
• 2015

Onggi, described as a 'breathing' type of pottery' has significantly influenced the traditional food culture of Korea. It is known that Onggi is an optimal type of storage for fermented foods such as soy sauce, salted seafood, and Kimchi, as air or liquid can penetrate through the body of this material. These foods gain flavor due to the breeding of aerobic bacteria at the beginning of the fermentation process. In this study, Onggi materials from five regions, Gangjin, Yeoju, Ulsan, Yesan, and Jeju, were collected and analyzed to determine their chemical and physical properties before and after sintering. The differences in the raw materials of other mining regions are examined in terms of their chemical and mineralogical compositions, specific surface area, particle size, and particle distribution. Among them, the Gangjin raw material has the greatest mean particle size of $92.29{\mu}m$, as well as the widest particle size distribution. Differences in the levels of $SiO_2$ and $Fe_2O_3$ are shown among Onggi raw materials. However, the crystalline phases formed after sintering are identical, except for the Jeju samples. At all sintering temperatures tested here, Gangjin Onggi showed the greatest porosity, leading to complete air permeation through the body within 90 minutes. These results taken together indicate that air permeation is strongly related to the pore structures in the Onggi body. This is assumed to affect the fermentation behavior.

• 한국환경생태학회지
• /
• 제22권5호
• /
• pp.595-597
• /
• 2008

경기도 이천에서 3개의 알을 산란하여 포란 중인 수리부엉이 둥지를 촬영하였다. 2개의 알에서 새끼가 부화하였으나 1마리는 사라졌고, 2007년 3월 8일 남은 1마리가 사망한 후 어미는 죽은 새끼를 먹었으며, 이튿날 어미는 번식을 포기하고 둥지를 떠났다.

• 한국세라믹학회지
• /
• 제44권10호
• /
• pp.585-588
• /
• 2007

Silicon nitride films for an anti-reflection coating were deposited on silicon via RF magnetron sputtering using a $Si_3N4$ target. The best result was obtained at the sputtering condition of 340 W RF power, 5 mtorr Ar atmosphere, $100^{\circ}C$ substrate temperature. The films showed 7.9% reflectance minimum with 2.35 refractive index. 0.21 absorption coefficient at 66.6 nm thickness. The surface morphology showed a smooth and dense film with good adhesion to silicon surface.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.841-845
• /
• 2013

We give a textured front on silicon wafer for high-efficiency solar cells by using micro contact printing method which uses PDMS (polydimethylsiloxane) silicon rubber as a stamp and SAM (self assembled monolayer)s as an ink. A random pyramidal texturing have been widely used for a front-surface texturing in low cost manufacturing line although the cell with random pyramids on front surface shows relatively low efficiency than the cell with inverted pyramids patterned by normal optical lithography. In the past two decades, the micro contact printing has been intensively studied in nano technology field for high resolution patterns on silicon wafer. However, this promising printing technique has surprisingly never applied so far to silicon based solar cell industry despite their simplicity of process and attractive aspects in terms of cost competitiveness. We employ a MHA (16-mercaptohexadecanoic acid) as an ink for Au deposited $SiO_2/Si$ substrate. The $SiO_2$ pattern which is same as the pattern printed by SAM ink on Au surface and later acts as a hard resist for anisotropic silicon etching was made by HF solution, and then inverted pyramidal pattern is formed after anisotropic wet etching. We compare three textured surface with different morphology (random texture, random pyramids and inverted pyramids) and then different geometry of inverted pyramid arrays in terms of reflectivity.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2005년도 한국식물병리학회 임시총회 및 춘계학술발표회
• /
• pp.87.2-88
• /
• 2005

• 자원환경지질
• /
• 제40권1호
• /
• pp.103-113
• /
• 2007

GIS와 연계시켜 만든 분산형 모델의 대표적인 경험식인 USLE model과 물리학기반의 GeoWEPP model을 경기도 이천시에 위치한 소유역에 적용하여 2004년 1월에서 2005년 1월까지 1년간의 토사유출량을 비교하였다. 연구기간동안의 유출된 토사량은 실제관측결과 270.54 ton, USLE 모델 적용 시 358.1 ton, 그리고 GeoWEPP 모델 적용 시 283.30 ton으로 각각 산출되었다. 각각의 모델을 적용한 산출량은 실제 산출량보다 과대하게 산출되었으며, 산출결과만을 볼 때, GeoWEPP 모델을 적용한 토사유출량이 USLE 적용 산출량 보다 관측량에 더 근사한 산출량을 보였다. 모델 적용 산출량이 과대산출 된 원인으로는 실험웨어를 월류하여 빠져나간 부유물에 대한 양이 포함되지 않았기 때문으로 판단된다.