• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.461-472
• /
• 1997

This study was carried out to investigate the characteristics of chemical components and precipitation at Kimhae area from March, 1992 to June, 1994. The pH values, concentration of soluble ions($Cl^-$, $NO_2^-}$ $NO_3^-}$, $NO_4^{2-}$-, $PO_4^{3-}$. $F^-$, $Mg^{2+}$, $Ca^{2+}$, $Mn^{2+}$, $K^+) and non-soluble metals(Cr.Si. Zn, Pb, Cu, Fe, Mn, Mg, Ad. V. Cal were measured by pH meter, IC (ion Chromatography) and ICP(Inductively Coupled Plasma). The data were analyzed by the dally. hourly distribution characteristics of acidity and chemical components, as well as the correlation between them. The results are as follows. 1. The pH range of precipitation was from 3.45 to 6.80 in Kimhae area. and average value was pH 4.62 and main chemical components were $SO_4^{2-}$, $Cl^-$, $NO_3^-$. The highest pH value and concentration appeared in initial rain, which might result from urbanlzation and industrialization in this area and long term transportation from China. 2. The hourly correction distribution of main anions related to pH value In the rainwater showed $SO_4^{2-}$ > $NO_3^-$ > $Cl^-$. Hourly concentration of heavy metal and each ion was highly correlated with pH in the precipitation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.2995-3002
• /
• 2000

The remaining life estimation for the aged components in power plants as well as chemical plants are very important beacuse mechanical properties of the components are degraded with time of service exposure in high temperature. Since it is difficult to take specimens from the operating components to evaluate mechanical properties of components nondestructive techniques are needed to estimate the degradation. In this study, test materials with 4 different degradation levels were prepared by isothermal aging heat treatment at 630$\^{C}$. And the DC potential drop method and destructive methods such as tensile, K(sub)IC and hardness tests were used in order to evaluate the degradation of 1-Cr-1Mo-0.25V steels. The objective of this study is to investigate the possibility of the application of DCPD method to estimated the material degradation, and to analyse the relationship between the electrical relationship between the electrical resistivity and the degree material degradation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.487-493
• /
• 2004

This study has been undertaken to increase availability of native camellia in Jeonnam as a medicinal resource and to isolate the effective components from them. Fresh leaf and flower of camellia, single camellia tea and camellia tea mixed with green tea, herbs were screened for cytotoxicity on MCF -7 (human breast adenocarcinoma pleual effusion), Calu-6 (human pulmonary carcinoma), SNU-601 (human gastric carcinoma) cells. Also their multidrug-resistance reversing activity were evaluated using drug sensitive AML-2/WT and multidrug-resistant AML-2/D100 cells. Among the camellia extracts, young leaf and camellia tea mixed with green tea had strong growth inhibitory effects in below 100 $\mu\textrm{g}$/mL against human cancer cells. In result, young leaf showed the strongest inhibitory effects on MCF -7 ($IC_{50}$/ = 100 $\mu\textrm{g}$/mL ↑), Calu-6 ($IC_{50}$/ = 79 $\mu\textrm{g}$/mL), and SNU -601 ($IC_{50}$/ = 39 $\mu\textrm{g}$/mL), and AML-2/WT ($IC_{50}$/ = 64 $\mu\textrm{g}$/mL). Chemosensitizing effect was the extracts of mature leaf ($IC_{50}$/ = 97 $\mu\textrm{g}$/mL, RF=3.0), roasted tea ($IC_{50}$/ = 76 $\mu\textrm{g}$/mL, RF = 2.6 ↑) and steam tea ($IC_{50}$/ = 70 $\mu\textrm{g}$/mL, RF=2.8 ↑) strongly potentiate vincristine cytotoxicity in AML-2/D100 cells. But their cytotoxicities to both sensitive AML-2/WT and resistant AML-2/D100 cells were in the same order of magnitude. This results indicate that crude extracts of camellia mature leaves would contain some principles which have chemosensitizing activity.

• The Magazine of the IEIE
• /
• v.42 no.7
• /
• pp.45-53
• /
• 2015

Power 소자 기술은 digital & mixed signal device와 on-chip 구현을 위해서 CMOS 공정에 대한 기본 이해가 필요하다. CMOS 공정 기반 위에 power device 공정을 추가하면서 다양한 operation voltage의 power 소자를 구현하고, passive device 들을 동일 공정에서 구현하여 다양한 components 들로 power IC 제품을 design 할 수 있도록 modular process를 제공하는 것이 중요하다. 또한 power device로 주로 사용되는 LDMOS 소자에 대한 performance 개선을 위해 simulation을 통해 key device parameter들의 특성을 예측하고, 구조를 설계하는 것이 Si process 전에 중요한 일 중의 하나이다. 아울러 power management가 potable power, consumer electronics 및 green energy에서 가장 빠르게 성장하는 분야이므로, 차별화된 power 소자 기술을 확보하여 급변하는 시장 환경에 대응하는 것이 필요하다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1039-1042
• /
• 2002

SMD(Surface Mounting Device) which mounts electronic components as IC-Chips on PCB automatically, produces a large dynamic force and vibration. The unwanted vibrations in SMD degrade the performance of the precision device and it is the major obstacle to limit its speed for mounting. This study investigated the vibration analysis of a typical SMD to predict the natural frequencies and mode shapes. To validate the finite element analysis of SMD, the FE result was compared with that of ODS measurements. It was shown that the predicted results were well correlated with the experimental modal parameters.

• 연구논문집
• /
• s.22
• /
• pp.85-96
• /
• 1992

A mass flow controller(MFC) is commonly used in the semiconductor industries to control the flow rate of various process gases. The measurement and precise control of the of flow rate the gas are the key for a succesful IC fabrication. To eventually design a reliable MFC, a pre-proto type MFC was built and its flow characteristics were investigated. Most of the functional components of the pre-proto type were built for the present study, but the remainder were adopted from a commercial unit. The flow control characteristics were compared with that of a standard MFC. Major dimensions of an MFC for 0-10 SLM capacity were suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.886-897
• /
• 2014

The aim of the present study was to get a total physical and chemical characterization and comparison of the principal components in Bangladeshi buffalo (B), Holstein cross (HX), Indigenous cattle (IC) and Red Chittagong Cattle (RCC) milk. Protein and casein (CN) composition and type, casein micellar size (CMS), naturally occurring peptides, free amino acids, fat, milk fat globule size (MFGS), fatty acid composition, carbohydrates, total and individual minerals were analyzed. These components are related to technological and nutritional properties of milk. Consequently, they are important for the dairy industry and in the animal feeding and breeding strategies. Considerable variation in most of the principal components of milk were observed among the animals. The milk of RCC and IC contained higher protein, CN, ${\beta}$-CN, whey protein, lactose, total mineral and P. They were more or less similar in most of the all other components. The B milk was found higher in CN number, in the content of ${\alpha}_{s2}-$, ${\kappa}$-CN and ${\beta}$-lactalbumin, free amino acids, unsaturated fatty acids, Ca and Ca:P. The B milk was also lower in ${\beta}$-lactoglobulin content and had the largest CMS and MFGS. Proportion of CN to whey protein was lower in HX milk and this milk was found higher in ${\beta}$-lactoglobulin and naturally occuring peptides. Considering the results obtained including the ratio of ${\alpha}_{s1}-$, ${\alpha}_{s2}-$, ${\beta}$- and ${\kappa}$-CN, B and RCC milk showed best data both from nutritional and technological aspects.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.393-397
• /
• 2005

In this paper, we constructed data transformation system because data designed in CAD is not portable in PCB product line. interface for the automation of PCB product. To do this, we analyze the information of PCB components and construct the information of It components. We also developed two kinds of algorithm; one is to detect human error and another is to exchange itself for the data which is suitable for PCB assembly line. Also our system is compared with existing systems.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.677-682
• /
• 1998

A Single-phase Active Rectifier (SAR) [4-6] with high power factor capability is adopted to satisfy the international harmonic current standards such as IEC 1000-3-2. To minimize the input current distortion and to apply the control IC, such as FA5331, UC3854, ML4821 and so forth, the new adequate sensing circuits of the input voltage and current are proposed. There are tow methods applicable the SAR to inverter air-conditioner from the viewpoint of both efficiency and cost. The selecting methods of the passive components are presented for the two approaches. Using the determined components, the loss analyses are carried out. The prototype SAR circuits of these two approaches with 3kW power consumption are built and the operation and performance of the circuits with power factor correction capability are verified through the experimental results.

• Preventive Nutrition and Food Science
• /
• v.7 no.2
• /
• pp.119-122
• /
• 2002

Oryza sativa cv. Mihyangbyo is one of several recently developed varieties of rice; characterized by high levels of aromatic components, which may increase its sensory and nutritional properties. In conjunction with our continuing investigation of bioactive components of improved grain varieties, a quinolone alkaloid was isolated from the n-butanol soluble fraction of the aleurone layer of Oryza sativa cv. Mihyangbyo (Gramineae) through activity-guided fractionation and isolation. The compound exhibited moderate antineoplastic activity in a human leukemia cell line (U937) with an $IC_{50}$/ value of 118.1 ug/mL, based on the MTT(3-[4, 5]dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide) cell proliferation assay. The chemical structure of the functional compound was determined, based on physical and spectroscopic characteristics.