• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.20-27
• /
• 1998

According as the member of the automobile body structure have been thinned their thickness and have become high strength, each part of the body structure has been put more severe stress condition. And, because fatigue strength of the spot welded lap joint is influenced by its geometrical and mechanical factors, welding condition and etc., there needs a quantitative and systematic evaluation method for them. In this study, by considering nugget edge of the spot weld part of the IB-type spot welded lap joint under tension-shear load to the ligament crack. fatigue strength of various IB-type spot welded lap joints was estimated with the stress intensity factor(S.I.F.) KIII which is fracture mechanical parameter. We could find that fatigue strength evaluation of the IB-type spot welded lap joints by KIII is more effective than the maximum principal stress ($\sigma$1max) at edge of the spot weld obtained from FEM analysis.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.32-37
• /
• 1999

Since stainless steel plates have good mechanical properties, weldability, appearance and resistance of corrosion, these are traditionally used for vehicles such as the bus and the train. And they are mainly fabricated by spot welding. But fatigue strength of their spot welded joint is considerably influenced by welding conditions as well as geometrical factors. Thus a reasonable and systematic criterion for long life design of spot welded body structure must be established. In this report, strain energy density was analyzed by using 3-dimensional finite element model about the IB-type spot welded lap joint under tension-shear load. Fatigue tests were conducted on them having various thickness, joint angle, lapped length and width. From their results, it was found that fatigue strength of the IB-type spot welded lap joints could be effectively and systematically rearranged by strain energy density at the edge of nugget.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.25-31
• /
• 1999

Stainless steel sheets are commonly used for vehicles such as the bus and the train. These are mainly fabricated by spot-welding. By the way, its fatigue strength is lower than base metal due to high stress concentration at the nugget. edge of the spot-welding. By the way, its fatigue strength is lower than base metal due to high stress concentration at the nugget edge of the spot-welding point. Especially, it is influenced by welding conditions as well as geometrical factors of spot welded joint. Therefore, it is not too much to say that structural rigidity and strength of spot-welded structures is decided by fatigue strength of spot welded lap joint. Thus, it is necessary to establish a reasonable and systematic long life design criterion for the spot-welded structure. In this study, numerical stress analysis was performed by using 3-dimensional finite element model on IB-type spot-welded lap joint of 304 stainless steel sheet under tension-shear load. Fatigue tests were also conducted on them having various thickness, joint angle, lapped length, and width of the plate. From the results, it was found that fatigue strength of IB-type spot-welded lap joints was influenced by its geometrical factors, however, could be systematically rearranged by maximum principal stress ({TEX}$σ_{1max}${/TEX}) at the nugget edge of the spot-welding point.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1187-1197
• /
• 2000

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.1-8
• /
• 2000

본 연구는 미이용 자원인 소경목(小經木) 조생수(早生樹) 등의 저질원료로부터 고성능을 지니는 구조용 보드를 제조하는 기술을 개발하는 것을 목적으로 하여 할렬 스트랜드 (S)/파티클(P) 복합체의 층구조와 S와 P의 혼합비율을 바꾼 단면구성에 따른 기초적 물성을 검토했다. 그 결과 스트랜드층을 포함하고 있는 SP 복합체의 경우, 전체적으로 휨성능(MOR, MOE)이 매우 높았다. 또 S단층 보드는 현저한 이방성을 나타내었지만 층구조가 PB에 가까워질수록 이방성은 감소하여, 7층 구조의 복합체는 이방성이 적었으며 특히 SP7은 직교방향도 휨강도가 높았다. 습윤시 휨강도 성능도 같은 경향을 나타내었다. 박리강도(IB)는 PB가 가장 높았고, 스트랜드층을 가진 복합체는 거의 같은 값을 나타내었다. 두께팽창율(TS) 은 PB가 가장 적은 값을 나타내었으며, 표층이 P층인 구조가 S표층구조보다 적은 경향을 나타내었다. 복합체의 표면특성은 표층 엘리먼트의 영향을 받아, 적고 미세한 엘리먼트인 P표층의 복합체가 크고 두꺼운 S표층 복합체보다 양호하였다. S와 P의 혼합비율의 영향은, SP비(比)를 증가시켜도 강도물성(MOR, MOE, IB)은 향상되지 않으며, 오히려 저하되는 것도 있었다. 두께팽창율(TS)은 SP 비(比) 1:1 이상의 복합체에서는 S만으로 제조한 보드와 같은 정도의 값을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.544-550
• /
• 2013

국내에서 생산된 파티클보드에 대한 나사못 유지력을 기존의 식으로부터 수정 보완된 예측 식으로 나타내기 위해 나사못 유지력실험을 실시했다. 본 연구에 사용된 나사못은 No. 6, No. 8 및 No. 10이었다. 나사못 유지력의 예측 식은 나사못의 직경과 관입길이, 파티클보드의 비중 및 IB의 함수로 나타냈다. 예측 식은 길이가 서로 다른 No. 8 나사못의 실험결과와 상당히 일치하였다. 파티클보드에 대한 실험결과들과 표면에서 나사못 유지력의 예측 값은 비중보다 IB가 더 좋은 예측인자였고, 측면에서는 IB보다 비중이 더 일치하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.127-131
• /
• 1997

In systematic and orderly estimation of fatigue strength of the spot welded lap joints, because the influence of residual stress of fatigue crach initiation and growth is not negligible, there need to estimate fatigue strength considered residual stress at near spot weld part of the lap joints. Therefore, in this thesis, peformed stress distribution and residual stress analysis at near the spot weld part by F.E.M and X-ray diffraction method, and obtained the maximum principal stress considered residual stress at nugget edge by superposing residual stress at nugget edge by superposing their results. From the results obtained above, we could find that fatigue strength of the IB-type spot welded lap joints was rearranged by the maximum principal stress considered residual stress at nugget edge and was entirely low about 13 percents compare with that neglected residual stress.

• Applied Biological Chemistry
• /
• 제41권1호
• /
• pp.23-30
• /
• 1998

B. thuringiensis에서 분리된 cryIB, truncated cryIB$[cryIB({\alpha})]$, cryIA(b), 및 cytA 유전자를 E. coli-Bacillus의 shuttle vector인 pBES에 cloning하여 이 유전자의 동종 혹은 이종발현과 이들 형질전환된 균주에서 생성되는 살충성 결정 단백질의 형태와 특성을 조사하였다. E. coli와 Bacillus의 형질전환은 electroporation으로 이루어졌으며, 효과적인 형질전환을 위한 field strength와 resistance는 E. coli의 경우 11.0 kV/cm와 129 ohms였고, Bacillus의 경우에는 4.5 kV/cm와 48 ohms였다. E. coli나 Bacillus에서 형성되는 살충성 결정 단백질의 전자현미경적인 형태는 원래의 숙주에서 형성된 것과 동일하여 CryIB와 CryIA(b)는 bipyramid 형이고, CytA는 부정형이었으며, 크기는 E. coli에서 형성된 것이 Bacillus에서 형성된 것 보다 작았다. Alkaline pH에서의 살충성 결정 단백질의 용해도는 E. coli의 경우 pH의 증가에 따라 점진적으로 증가되었으나, Bacillus의 경우에는 pH 9 까지는 점진적으로 증가하다가 pH 9 이상에서는 큰 폭으로 증가하여 E. coli의 경우보다 2배 이상의 차이를 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.22-31
• /
• 2020

In this study, rice straw and bagasse are used as raw materials to produce binderless particleboard (BPB). This study aims to evaluate the mechanical and physical properties of BPB. We identify the raw material that would be better for the production of BPB from the viewpoint of their basic properties. The BPBs are made from rice straw, bagasse, and combinations of both in ratios of 50:50 and 40:60, respectively. The modulus of elasticity (MOE), modulus of rupture (MOR), internal bonding (IB) strength, water absorption, and thickness swelling properties of the different BPBs are determined and compared. Results showed that all the properties are significantly influenced by the type of particles or particle combinations in the BPB. BPBs made from bagasse alone have the highest MOR, MOE, and IB mean values, whereas BPBs made from rice straw alone exhibit the lowest MOR, MOE, and IB values. Meanwhile, BPBs made from a combination of rice straw and bagasse at 40:60 ratio by weight have the second highest values for properties such as MOR, MOE, and IB, followed by BPBs made from a combination of rice straw and bagasse at 50:50 ratio by weight.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.37-43
• /
• 2015

Objectives: Some antioxidants are believed to restore dentin bond strength after dental bleaching. This study was done to evaluate the influence of antioxidants on the bond strength of bleached bovine dentin. Materials and Methods: Thirty incisors were randomly assigned to 10 groups (two unbleached control and eight bleached groups:immediate bonding IB, 4 wk delayed bonding DB, 10% sodium ascorbate treated SA, 10% ${\alpha}$-tocopherol treated TP groups). Teeth in half of groups were subjected to thermal stress, whereas the remaining groups were not. Resin-dentin rods with a cross-sectional area of $2.25mm^2$ were obtained and microtensile bond strength was determined at a crosshead speed of 1 mm/min. Fifteen specimens were prepared for SEM to compare the surface characteristics of each group. The change in dentin bond strength from thermal stress and antioxidant treatment was evaluated using two-way analysis of variance (ANOVA) and Sheffe's post hoc test at a significance level of 95%. Results: The control group exhibited the highest bond strength values, whereas IB group showed the lowest value before and after thermocycling. The DB group recovered its bond strength similar to that of the control group. The SA and TP groups exhibited similar bond strength values with those of the control and DB groups before thermocycling. However, The TP group did not maintain bond strength with thermal stress, whereas the SA group did. Conclusions: Applying a 10% sodium ascorbate solution rather than 10% ${\alpha}$-tocopherol solution for 60 sec is recommended to maintain dentin bond strength when restoring non-vitally bleached teeth.