• Journal of Magnetics
• /
• 제7권2호
• /
• pp.51-54
• /
• 2002

The crystallization of amorphous Ba-ferrite/sapphire(001) thin films was studied in real-time synchrotron x-ray scattering experiments. In the sputter-grown amorphous films, we found the existence of epitaxial $Fe_3O_4$ interfacial crystallites (50-${\AA}$-thick), well aligned $[0.03^circ$full-width at half-maximum (FWHM)] to the sapphire [001] direction. The amorphous precursor was crystallized to epitaxial Ba-ferrite and \alpha-Fe_2O_3$grains in two steps; i) the nucleation of crystalline \alpha-Fe_2O_3$ phase started at $300^circ{C}$ together with the transformation of the $Fe_3O_4$ crystallites to the \alpha-Fe_2O_3$ crystallites, ii) the nucleation of Ba-ferrite phase occurred at temperature above $600^circ{C}$. In the crystallized films irrespective of the film thickness, the crystal domain size of the \alpha-Fe_2O_3$grains was about 250 ${\AA}$ in the film plane, similar to that of the Ba-ferrite grains.

• Journal of applied mathematics & informatics
• /
• 제29권5_6호
• /
• pp.1603-1608
• /
• 2011

Let R be a ring with identity. If a, b, $c{\in}R$ such that a+b+c = 1, then the distributive laws from addition over multiplication hold in R, that is a+(bc) = (a+b)(a+c) when ab = ba, and (ab)+c = (a+c)(b+c) when ac = ca. An application to obtains, if A,B are idempotent matrices and AB = BA = 0 then there exists an idempotent matrix C such that A + BC = (A + B)(A + C), and also A + BC = (I - C)(I - B). Some other cases and applications are also presented.

• 한국재료학회지
• /
• 제18권9호
• /
• pp.475-481
• /
• 2008

Positive temperature coefficient of resistivity (PTCR) characteristics of (1-x)$BaTiO_3-x(Bi_{0.5}K_{0.5})TiO_3$ ceramics doped with $Nb_2O_5$ were investigated in order to develop the Pb-free PTC thermistor available at high temperatures of > $120^{\circ}C$. The PTCR characteristics appearing in the ($B_{i0.5}K_{i0.5})TiO_3$ (< 5 mol%) incorporated $BaTiO_3$ ceramics, which might be mainly due to $Bi^{+3}$ ions substituting for $Ba^{+2}$ sites. The 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics showed good PTCR characteristics of a low resistivity at room temperature (${\rho}_r$) of $31{\Omega}{\cdot}cm$ a high ${\rho}_{max}/{\rho}_{min}$ ratio of $5.38{\times}10^3$, and a high resistivity temperature factor (${\alpha}$) of $17.8%/^{\circ}C$. The addition of $Nb_2O_5$ to 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics further improved the PTCR characteristics. Especially, 0.025 mol% $Nb_2O_5$ doped 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics exhibited a significantly increased ${\rho}_{max}/{\rho}_{min}$ ratio of $8.7{\times}10^3$ and a high ${\alpha}$ of $18.6%/^{\circ}C$, along with a high $T_c$ of $148^{\circ}C$ despite a slightly increased ${\rho}_r$ of $31{\Omega}{\cdot}cm$.

• 자연과학논문집
• /
• 제13권1호
• /
• pp.51-63
• /
• 2003

$1-10^{-20}$atm의 산소 압력과 700K 및 1200K의 등온상태에서 Donor를 첨가한 $BaTiO_3$의 전기전도도를 조사하여 결함의 형태를 조사하였다. Donor를 첨가한 $BaTiO_3$에서 Donor의 첨가량이 증가함에 따라 최소 전기도도를 나타내는 극소점의 위치가 순수한 경우에 비아여 어느 정도 이동이 있었다. 이러한 극소점 위치의 이동으로 불순물의 상대적 함유량을 비교할 수 있었다. 매우 낮은 산소압력에서는 Dopant의 양에 무관하게 전도도 값이 일정하였으며 이러한 현상은 환원반응이 주된 원인임을 알았다.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.13-22
• /
• 1981

This study is to investigate the effective mineralizer in the manufacture of forsterite porcelain as a high frequency insulator. A mixture of $Mg(OH)_2$. and $SiO_2$.($\alpha$-Quartz) corresponding to the molar ratio of 2.0 MgO: 1.0 $SiO_2$ was prepared from the materials of high purity. It was heated to 140$0^{\circ}C$ at the rate of 20$0^{\circ}C$/hr, which was kept constantly for 1 hour, and one has made chamotte after cooling. Six kinds of glasses were prepared by an 0.1 atomic equivalent of K ions substitution-Ba, Bi, Zn, Cd, Zr-to the basic K-glass (0.333 $K_2O$.1.14 $SiO_2$) and were melted approximately at 150$0^{\circ}C$. The forsterite bodies were provided by adding each glass (10, 15, 20, 25, 30%) to the forsterite chamotte, which was fired at 1320, 1360, 1400, 144$0^{\circ}C$. (1 hr). One has examined the physical and dielectric properties for the specimens. The results of the experiments are as follows; 1. As for water absorption: Bodies were better vitrified with an addition and temperature change of Ba, Bi, Zn-glasses. The specimen containing Cd-glass showed deviation of slow decreasing, where as K-glass was completely not vitrified. 2. Bodies containing Ba, Zn, Bi-glasses appeared comparatively high Modulus of Rupture at 136$0^{\circ}C$, while containing Zr-glass had the highest Modulus of Rupture as the addition changes remarkably at 140$0^{\circ}C$. 3. It was estimated that 20-25% glass present in a forsterite bodies were in good conditions as for physical properties. 4. Specimens of Ba, Bi, Zr-glasses were superior as for dielectric properties, where among Ba-glass was most excellent. 5. Dielectric constant commonly increases in a slight gradient as firing temperature rises. 6. The petrographic examination showed that the bodies containing Ba, Bi-glasses had fine crystals, and were observed distinctly large mosaic crystals in the Zn-glass.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.15-17
• /
• 2005

In this study, tunable dielectric materials are important for resonator, variable capacitor, phased array antenna and other devices application. In this paper, Dielectric constant increased and tuning range increased with the increased of $BaSrTiO_3/Li_{2}CO_{3}$ content, which probably can be explained by the substitution of Ba3+, Li1+ on BaTiO3 lattice. The tunability and dielectric loss of the $BaSrTiO_2/Li_{2}CO_{3}$ thick film, sintered at $1150^{\circ}C$, were about 43 % and 0.234 at 10$\sim$15 MHz, respectively. In case of BaSrTi/MgO, Dielectric constant decreased and tenability increased with the added of $BaSrTiO_3/MgO$. The ferroelectrics properties were distinct when adding Li to BST ceramic thick film, and paraelectrics pattern was distinct when adding Mg.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2013-2015
• /
• 2005

In this paper, Effect of $BaSrTiO_3/Li_2CO_3$ on low temperature sintering and dielectric property of thick films has been investigated for variable capacitor on high frequency. The thick films were fabricated by the tape casting and then the structural and dielectric properties as a function of an addition composition ratio and sintering temperature were studied. For the thick film sintered at $1050^{\circ}C$, it was densified to 96% of $BaSrTiO_3$ theoretical density by the addition of 10 $wt{\cdot}%$ $BaSrTiO_3/Li_2CO_3$. Dielectric constant increased and Curie temperature lowered with the increased of $BaSrTiO_3/Li_2CO_3$ content, which probably can be explained by the substitution of $Ba^{3+},Li^{1+}$ on $RaTiO_3$ lattice. The tunability and dielectric loss of the $BaSrTiO_3/Li_2CO_3$ thick film, sintered at $1350^{\circ}C$, were about 26% and 0.234 at $10{\sim}15MHz$, respectively.

• Biomolecules & Therapeutics
• /
• 제25권6호
• /
• pp.618-624
• /
• 2017

Betulinic acid (BA), a natural pentacyclic triterpene found in many medicinal plants is known to have various biological activity including tumor suppression and anti-inflammatory effects. In this study, the cell-death induction effect of BA was investigated in BV-2 microglia cells. BA was cytotoxic to BV-2 cells with $IC_{50}$ of approximately $2.0{\mu}M$. Treatment of BA resulted in a dose-dependent chromosomal DNA degradation, suggesting that these cells underwent apoptosis. Flow cytometric analysis further confirmed that BA-treated BV-2 cells showed hypodiploid DNA content. BA treatment triggered apoptosis by decreasing Bcl-2 levels, activation of capase-3 protease and cleavage of PARP. In addition, BA treatment induced the accumulation of p62 and the increase in conversion of LC3-I to LC3-II, which are important autophagic flux monitoring markers. The increase in LC3-II indicates that BA treatment induced autophagosome formation, however, accumulation of p62 represents that the downstream autophagy pathway is blocked. It is demonstrated that BA induced cell death of BV-2 cells by inducing apoptosis and inhibiting autophagic flux. These data may provide important new information towards understanding the mechanisms by which BA induce cell death in microglia BV-2 cells.

• 전기화학회지
• /
• 제17권4호
• /
• pp.222-228
• /
• 2014

리튬 이차전지 양극소재인 Ni-rich계의 $Li[Ni_{1-x-y}Co_xMn_y]O_2$는 높은 방전용량을 갖고 있지만 Ni의 함량이 많아짐으로써, 구조적 안정성과 전기화학적 특성이 떨어지는 문제점이 있다. 이러한 문제점을 해결하기 위해 양이온 도핑에 대한 연구가 시행되고 있다. 본 연구는, 공침법을 이용하여 제조한 $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$ 전구체를 사용하여 바륨(Ba)이 도핑된 $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01)를 합성하였고, 바륨(Ba)의 도핑에 따른 구조적 안정성 및 전기화학적 특성을 연구하였다. 구조적 특성분석을 위한 X선-회절분석 결과, 바륨(Ba) 도핑시 $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor)비가 감소하는 것을 통해 층상구조의 안정성이 증가한 것을 확인하였고, 전기 화학적 특성이 개선될 것으로 예측하였다. 전기화학적 분석 결과, 바륨(Ba)을 도핑한 전극의 경우 과전압의 감소로 $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ 전극보다 $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01)전극의 방전용량이 $23mAhg^{-1}$ 증가하였고, 구조적 안정성의 증가로 싸이클 특성의 개선과, 전극과 전해액 간의 전하이동 저항의 감소로 인하여 고율특성 특성이 개선된 것을 확인 하였다.

• 한국재료학회지
• /
• 제2권2호
• /
• pp.151-156
• /
• 1992

본 연구에서는 $Ba(OH)_2{\cdot}8H_2O,\;Sr(OH)_2{\cdot}8H_2O$ 및 $Ti(i-OC_3H_7)_4$를 사용하여 졸-겔법에 의해 미세한 $(Ba_{1-x}Sr_{x})TiO_3$ 분말을 제조하였다. TEM 관찰, BET 비표면적측정 및 XRD회절도의 분석결과 $700^{\cric}C$에서 하소한 뚠말의 입자크기는 20~40nm이고 입방정상으로 존재하였다. 또한 XRD 회절도고부터 계산된 격자상수 및 (112)피크의 이동으로부터 고용체분말이 형성되었음을 확인할 수 있었다. 제조된 분말에서의 EDAX 분석을 통한 양이온들의 상대적인 비율 및 소결체에 대한 유전상수의 측정결과로부터 제조된 분말에서 양이온들의 분포가 입자단위에서 균질함을 예상할 수 있었다.