• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.362-365
• /
• 2002

This paper, experiment manufactures device of Metal/Poly-${\gamma}$ Benzyl $_D$-GlutamateOrganic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Permittivity of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.150-152
• /
• 2002

This paper, experiment manufactures device of Metal/Poly-$\gamma-Benzyl\;_D-Glutamate$ Organic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Dielectric constant of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1251-1253
• /
• 2004

Light diffraction on optically anisotropic substrates with the surface microrelief has been calculated by using the OAGSM method. Varying of the microrelief depth and material birefringence allows to realize different polarization state of the light beam transmitted or reflected by the substrate. The approach can be used to optimize the LCD backlight.

• 천문학회지
• /
• 제26권2호
• /
• pp.103-114
• /
• 1993

We have analyzed a set of high resolution photographic line profiles of a Zeeman sensitive Fe I $\lambda$ 6302.5 line taken with the Universal Birefringent Filter over a single round sunspot (SPO 5007) at the Sacramento Peak Solar Observatory. The observed spectra recorded on films are traced by PDS and the traced densities are converted to relative intensity by means of IRAF. The Stokes I and V profiles are then constructed by adding together and subtracting from each other the left and right handed circular polarizations, respectively. The reduced I and V profiles are analyzed by means of the coarse analysis(Auer et al.(1977), Skumanich and Lites(1987)) with the use of inversion technique. It is found that the umbral field strength is about 3000 gauss and the field distribution follows closely the emperical model proposed by Wittmann(1974).

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1241-1249
• /
• 2002

The extent of materials deterioration can be evaluated accurately by mechanical test such as impact test or creep test. But it is almost impossible to extract a large test specimen from in-service components. Thus material degradation evaluation by non-destructive method is earnestly required. In this paper, the material degradation for virgin and several aged materials of a Cr-Mo-V steel, which is an candidated as structural material of the turbine casing components for electric power plant, is nondestructively evaluated by reactivation polarization testing method. And, the results obtained from the test are compared with those in small punch(SP) tests recommended as a semi-nondestructive testing method using miniaturized specimen. In contrast to the aged materials up to 1,000hrs which exhibit the degradation behaviors with increased ${\Delta}[DBTT]_{SP}$, the improvement of mechanical property can be observed on the 2,000hrs and 3,000hrs aged materials. This is because of the softening of material due to the carbide precipitation, the increase of ferritic structures and the recovery of dislocation microstructure by long-time heat treatment. The reactivation rates($I_R/I_{Crit},\;Q_R/Q_{Crit}$) calculated by reactivation current densityt ($I_R$) and charge($Q_R$) in the polarization curves exhibit a good correlation with ${\Delta}[DBTT]_{SP}$ behaviors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.94-98
• /
• 2000

Polycrystalline SBTN ferroelectric thin films were prepared by sol-gel method with various Nb mole ratios on Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperatures and characterized in terms of phase and microstructure. Relatively a well saturated hysteresis pattern was obtained at x =0.2 in S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin films. At an applied voltage of 5V, the dielectric constant ($\varepsilon$$_{r}$) and dissipation factor (tan $\delta$) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin film (x=0.2) were about 236.2 and 0.034. Measured remanent polarization (2Pr) and coercive field (Ec) were 4.28C/c $m_2$, and 38.88kv/cm respectively. No fatigue was observed up to 6$\times$10$_{10}$ switching cycles at 5V and the normalized polarization reduced by a factor of only 4%.%. 4%.%. 4%.%.%.%.%.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.635-643
• /
• 2009

The resistance to pitting corrosion of Fe-Cr alloys was evaluated by performing potentiodynamic polarization and critical pitting temperature (CPT) tests. For the potentiodynamic polarization tests, various standards were applied, i.e., KS D 0238 (wet, dry), ASTM G 61, and ISO 17475, showing different potentiodynamic polarization results including pitting potentials. ASTM G 61 and ISO 17475 standards presented relatively higher pitting potential while KS D 0238 (dry) indicated lower values than the others. Effects of surface roughness, scan rates, and exposure time to air before tests were also investigated. CPT tests were performed under two different applied potentials, 300 m$V_{SCE}$ and 200 m$V_{SCE}$ in deaerated 1 M NaCl aqueous solution. CPT values and the polarization test results showed a linear relationship.

• 비파괴검사학회지
• /
• 제22권3호
• /
• pp.267-274
• /
• 2002

본 연구는 Cr-Mo-V강의 다양한 분극특성들을 이용하여 비파괴적으로 재질열화를 평가하는 전기화학적 기법에 대해서 서술한 것이다. 사용된 전기화학적 기법은 스테인레스강의 열 이력에 의해 주로 야기되는 강화원소 결핍 영역에서의 예민화 그리고 부식속도를 평가하기 위해 널리 사용되는 양극분극 시험법이다. 재질열화 평가는 $10{\times}10{\times}0.5mm$ 크기의 시험편을 사용하는 미소역학 시험법으로 잘 알려진 SP시험에 의해 수행되었다. $630^{\circ}C$에서 1,000hrs 시효된 재료가 가장 높은 재질 열화도 ${\Delta}[DBTT]_{SP}$을 보였으나, 2,000hrs 그리고, 3,000hrs 시효된 재료는 시효 시간이 증가함에 따라 ${\Delta}[DBTT]_{SP}$의 감소를 보였다. 전류밀도의 차 $({\Delta}I_{FP},\;{\Delta}I_{SP})$가 1,000hrs 시효시간까지는 증가하였고, 그 이후의 시효시간에서는 시효시간의 증가와 더불어 감소됨이 관찰되었다. 이 같은 결과는 시효재료에 대한 경도의 거동과 일치하였다. 덧붙여, ${\Delta}[DBTT]_{sp}$는 ${\Delta}I_{FP}$ 및 ${\Delta}I_{SP}$와 같은 전기화학적 분극특성들과 좋은 상관관계를 가지고 있음을 알 수 있었다.

• Ocean and Polar Research
• /
• 제31권1호
• /
• pp.111-119
• /
• 2009

Biogenic surface films, which are often present in coastal areas, may enhance the signatures of hydrodynamic processes in microwave, optical, and infrared imagery. We analyzed ERS-1/2 Synthetic Aperture Radar (SAR) and Envisat Advanced Synthetic Aperture Radar (ASAR) images taken over the Japan/East Sea (JES). We focused on the appearance of the contrast SAR signatures, particularly the dark features of different scales caused by various oceanic and atmospheric phenomena. Spiral eddies of different scales were detected through surface film patterns both near the coast and in the open regions of the JES in warm and cold seasons. During field experiments carried out at the Pacific Oceanological Institute (POI) Marine Station 'Cape Shults' in Peter the Great Bay, the sea surface roughness characteristics were measured during the day and night using a developed polarization spectrophotometer and various digital cameras and systems of floats. The velocity of natural and artificial slicks was estimated using video and ADCP time series of tracers deployed on the sea surface. The slopes of gravity-capillary wave power spectra varied between .4 and .5. Surface currents in the natural and artificial slicks increased with the distance from the coast, varying between 4 and 40 cm/s. The contrast of biogenic and anthropogenic slicks detected on vertical and horizontal polarization images against the background varied over a wide range. SAR images and ancillary satellite and field data were processed and analyzed using specialized GIS for marine coastal areas.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1001-1002
• /
• 2013