• Title/Summary/Keyword: I-V character

Search Result 41, Processing Time 0.026 seconds

A Study on the Evaluation of Biotope Value of Rural Areas in terms of Nature Experience and Recreation - A Case Study of Large Residential Land Development District - (자연체험 및 휴양적 관점에서 농촌지역의 비오톱 가치평가 연구 - 대규모 택지개발 사업지를 대상으로 -)

  • Cho, Hyun-Ju;Han, Sang-Yoel;Lee, Hyun-Taek;SaGong, Jung-Hee
    • Journal of Korean Society of Rural Planning
    • /
    • v.16 no.3
    • /
    • pp.87-101
    • /
    • 2010
  • This research has a significance on providing basic material of landscape ecological planning and open space planning of the future site by selecting Sinseo innovative city area, large residential land development district in rural area, by classifying biotope types and implementing recreational value assessment in the level of area. First of all, as a result of classification of biotope types in research site, total 11 biotope type groups including stream biotope and its subordinate 51 biotope types. Also, as a result of the first value assessment of classified biotopes, there are total 5 types such as vegetation-full natural river, fallow ground in I grade. In addition, it is analyzed that grade II have 18 types, III are 10, IV are 12, the least valuable V are 6. Especially, grassland biotope(GD) was classified into grade II, which is one grade raised, because it is analyzed that it has high value in terms of normal access and availability although it was assessed as grade ill in terms of natural experience quality. Lastly, as a result of the second assessment, special areas for natural experience and recreation(1a, 1b) are 15, areas for natural experience and recreation(2a, 2b, 2c) are 47. Especially, the 52th drawing mark space was grade II in the first assessment but its value grade was upgraded because of its high value in terms of use evidence, size of the area, accessibility with housing area, history and cultural character and so on.

Role of modifiers on the structural, mechanical, optical and radiation protection attributes of Eu3+ incorporated multi constituent glasses

  • Poojha, M.K. Komal;Marimuthu, K.;Teresa, P. Evangelin;Almousa, Nouf;Sayyed, M.I.
    • Nuclear Engineering and Technology
    • /
    • v.54 no.10
    • /
    • pp.3841-3848
    • /
    • 2022
  • The effect of modifiers on the optical features and radiation defying ability of the Eu3+ ions doped multi constituent glasses was examined. XRD has established the amorphous nature of the specimen. The presence of various functional/fundamental groups in the present glasses was analyzed through FTIR spectra. The physical, structural and elastic traits of the glasses were explored. The variation in the structural compactness of the glass structure according to the incorporated modifier was enlightened to describe their suitability for a better shielding media. For the examined glasses, the metallization criterion value varied in the range 0.613-0.692, indicating the non-metallic character of the glasses with possible nonlinear optical applications. The computed elastic moduli expose the Li-containing glass (BTLi:Eu) to be tightly packed and rigid, which is a requirement for a better shielding channel. Furthermore, the optical bandgap and the Urbach energy values are calculated based on the optical absorption spectra. The evaluated bonding parameters revealed the nature of the fabricated glasses covalent. In addition, we investigated the radiation attenuation attributes of the prepared Eu3+ ions doped multi constituent glasses using Phy-X software. We determined the linear attenuation coefficient (LAC) and reported the influence of the five oxides Li2O3, CaO, BaO, SrO, and ZnO on the LAC values. The LAC varied between 0.433 and 0.549 cm-1 at 0.284 MeV. The 39B2O3-25TeO2-15Li2O3-10Na2O-10K2O-1Eu2O3 glass has a much smaller LAC than the other glasses.

Money as a Polycontextual Value and Means of Self-Identification of a Modern Person: Traditional vs Virtual

  • S. Khrypko;Qi Yang;M. Kozlovets;I. Chornomordenko;M. Kolinko ;V. Havronenko;O. Lobanchuk;Н. Salo
    • International Journal of Computer Science & Network Security
    • /
    • v.23 no.2
    • /
    • pp.1-12
    • /
    • 2023
  • The article examines the axiological psycho-philosophical understanding of the phenomenon of money and its value role in modern society. The traditional and virtual context of the representation of the money phenomenon is considered.Following the ideas of G. Simmel, the authors consider money not only as a purely economic, but also a psycho-philosophical, cultural and social phenomenon. Money appears as a result of cultural development of the world and gradually forms a monetary culture as a space of economic and social interaction of people. Under the influence of the monetary culture of one or another historical period, the character of a person's economic activity, values and life orientations are formed. Modern money culture is often called financial civilization. Peculiarities of modern monetary culture are studied, its main features and problems are determined in the article. The problem of the peculiarities of the constructive and destructive attitude of the individual towards money is identified; a psycho-philosophical and cultural-identification typology of people is described, which is based on clinical observations and interpreted through the prism of psychoanalytic theory. The concept of money is highlighted from the standpoint of a social-psychological approach. The theoretical foundations of money's influence on the decision-making process and human behavior are also revealed.

A Study on the Leaching of Heavy Metals by Municipal Solid Waste Landfill Leachate (폐기물 매립지 침출수에 의한 중금속 용출에 관한 연구)

  • Jung, Jong-Gwan;Jang, Won;Park, Young-Suk
    • Journal of Environmental Impact Assessment
    • /
    • v.6 no.1
    • /
    • pp.105-110
    • /
    • 1997
  • Sanitary landfill is a general method as a final disposal of municipal solid waste(MSW), therefore leachate characteristics are very various as lime goes by because of highly concentrated organic acids are contained non biodegradable COD. So it is hard to abide by the mandatory standards of discharge eventhough applying the physicochemical and biological processes to treat the leachate. The process of treating leachate are determined by the degree of removal and components, but they are highly contained organic materials. It is a removal method to use jointly with the physicochemical process if the hard and fast rule is needed. The critical components of material are COD, ammonia, salts and heavy metals in the case of treating biologically. Biological process is to use metabolism of microorganism, therefore it is a desirable condition which heavy metals are not contained, because they acting as an inhibitor of enzyme. Of these are contained, organic decomposition and synthetic function of microorganisms decrease significantly. Consequently, this research paper lays emphasis on the concentration of heavy metals in leachate and for the purpose of forecasting the factors which are affecting the leaching of metalic waste in some degree, experimented the various reacting conditions. 1. When the concentration of heavy metals in leachate is in comparison with the level eluted after reaction, at pH 7.9 the result of reaction for PCB to CCL scrap showed that Zn, Mn, Cu was more eluted 11.6 times, 340.3 times, and 2,705.5 times respectively than the leachate undiluted solution. 2. At the condition of strong acid pH 4.7, the concentration of heavy metals in EM undiluted solution showed that Zn, Mn, Cu was more eluted 26.5 times, 147.3 times, and 3,656.3 times respectively than leachate undiluted solution. 3. When the ratio leachate to EM was 50 vs 50(V/V%), Mn was more eluted 198.7 times than leachate undiluted solution, but Zn and Cu do not show the meaningful results. 4. The color of landfill leachate was black-brown. And fulvic acid that is main ingredient of NBD COD contained, oxygen of 44~50%. For that reason, I estimated that the level of Zn, Mn, Cu was higher than the case of leachate. 5. COD of leachate from general landfill is difficult to remove. Because the solution of heavy metals is improved by the character of leachate(pH & ingredient of oxygen etc.) hence the Mn, Cu, Zn act as disturbing factor, the biochemical treatment is hard. Therefore the type of PCB & CCL scrap, iron, aluminum contained metals need to previously separate from general wastes as much as possible.

  • PDF

Linkage Analysis of the Resistance Genes to Whitebacked Planthopper (Sogatella furcifera Horvath) in Rice (수도의 흰등멸구(Sogatella furcifera Horvath)에 대한 저항성 유전자 연관분석)

  • ;Mun-Hue Heu
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.29 no.2
    • /
    • pp.136-151
    • /
    • 1984
  • The purpose of this study is to find out the linkage relationship of the resistance genes Wbph1 and Wbph2 which are known to be present in the rice cultivar N22 and ARC 10239 respectively, with the genetic markers which are identified as the specific linkage tester. Crosses were made between the resistant parents and the genetic marker stocks and their F$_2$ populations were grown out in the field. The genetic segregations of the marker character were studied and the seeds were harvested individual plant base. These F$_3$ seeds were grown into plant-line base in the greenhouse and their responses to the whitebacked planthopper were tested. Then the linkage relationship between the F$_2$ plant marker character and the F$_3$ resistance responses to the whitebacked planthopper were examined. In the F$_2$ generation of the crosses between the resistant parent N22 and the genetic marker stocks, the genetic markers, such as lg, d-t, g, la, bl and gl, showed the segregation of 3 dominance to 1 recessiveness, and the Bh marker segregated into 9:7 ratio. Another 4 marker genes, such as Cl, gh, Lh and bc, did not show the good fittness to the expected value. In the F$_2$ generation of the crosses between the resistant parent ARC 10239 and the genetic marker stocks, the genetic markers, such as Cl, lg, Pn, g, la, bl and gl, showed the segregation of 3 dominance to 1 recessiveness, and the Bh gene segregation fitted well to the 9:7. The rest 4 genetic markers, such as gh, Lh, nl and be, did not show the good fitness to the expected ratio. The resistance genes Wbphl of N22 and the Wbph2 of ARC 10239 appeared to be single dominant gene each. The Wbphl gene was linked with the marker gene, liguleless (lg) of linkage group II with the recombination value of 36.8%, and with the black hull (Bh) with the value of 35.9%. The Wbph2 gene appeared to be independent of all the markers tested here, such as Cl, lg, Pn, g, Lh, la, nl, bl, bc, gl, Bh, of linkage gtoup I, II, III, IV, VI, VII, VIII, IX, X, XI, and XII respectively. That the Wbph2 linkage relations were not investigated was regarded as the causes that the tested marker genes on the chromosome were located with the resistance gene at the distant loci, and of the phenctypic properties of the marker characters. The Wbph2 linkage relations should be reexamined in the cross combinations of linkage group Ⅶ, Ⅷ, Ⅹ and XII including linkage group V which was not tested in this experiment.

  • PDF

Perfluoropolymer Membranes of Tetrafluoroethylene and 2,2,4Trifluofo- 5Trifluorometoxy- 1,3Dioxole.

  • Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1999.07a
    • /
    • pp.39-42
    • /
    • 1999
  • Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

  • PDF

Quality of Yellow Poplar (Liriodendron tulipifera) Seedlings by the Method of Seedling Production (백합나무 양묘방법에 따른 묘목품질 비교)

  • Ryu, Keun-Ok;Song, Jeong-Ho;Choi, Hyung-Soon;Kwon, Hae-Yun;Kwon, Yong-Rak
    • Journal of Korean Society of Forest Science
    • /
    • v.96 no.3
    • /
    • pp.307-316
    • /
    • 2007
  • Yellow poplar (Liriodendron tulipifera L.) has low germination rate relatively other species, so the seedling production of Yellow poplar is a hard task. Accordingly this study was conducted to determine the optimal germination conditions for healthy seedling production and to promote survival rate after afforestation. Gemination percentage was examined at different media and seed covering materials using planting flats in the greenhouse. The best germination percentage was observed in sand for media and compound soil for covering materials. But it was time to transplant, seedlings became a poor character (i.e. height, root length, number of root, dry weight) in sand for media. In order to produce healthy seedlings, each different medium was compounded with TKS-2 (this is a gardening bed soil.) in the ratio 1:1 (v/v.), and compared two conditions. Quality of seedling was better than not mixed TKS-2 into each medium. Transplanting seedlings from greenhouse to nursery grew up rapidly 2 months later (early in August~early in October). Growth amount during two months corresponded to 85.6% and 71.3% in total growth amount of height and diameter at root collar, respectively. In the case of the competition-density effect on yellow-poplar seedlings, direct seedling produced the maximum 35 standard seedlings above 8 mm of root collar diameter per $m^2$, while transplanting seedling produced the maximum 64 standard seedlings per $m^2$. And produced seedlings of two way were significantly different rootlet while axial root and lateral root was not significantly different.

Joining and Performance of Alkali Metal Thermal-to-electric Converter (AMTEC) (알칼리금속 열전기변환장치의 접합과 출력성능)

  • Suh, Min-Soo;Lee, Wook-Hyun;Woo, Sang-Kuk
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.41 no.7
    • /
    • pp.665-671
    • /
    • 2017
  • The alkali-Metal Thermal-to-electric Converter (AMTEC) is one of the promising static energy conversion technologies for the direct conversion of thermal energy to electrical energy. The advantages over a conventional energy converter are its high theoretical conversion efficiency of 40% and power density of 500 W/kg. The working principle of an AMTEC battery is the electrochemical reaction of the sodium through an ion conducting electrolyte. Sodium ion pass through the hot side of the beta"-alumina solid electrolyte (BASE) primarily as a result of the pressure difference. This pressure difference across the BASE has a significant effect on the overall performance of the AMTEC system. In order to build the high pressure difference across the BASE, hermeticity is required for each joined components for high temperature range of $900^{\circ}C$. The AMTEC battery was manufactured by utilizing robust joining technology of BASE/insulator/metal flange interfaces of the system for both structural and electrical stability. The electrical potential difference between the anode and cathode sides, where the electrons emitted from sodium ionization and recombined into sodium, was characterized as the open-circuit voltage. The efforts of technological improvement were concentrated on a high-power output and conversion efficiency. This paper discusses about the joining and performance of the AMTEC systems.

Contents Analysis on the Image of Nurses in the Television Drama (텔레비전 드라마의 간호사 이미지에 대한 분석)

  • Moon, Young-Im;Im, Mi-Lim;Yun, Kyung-Yi
    • The Korean Nurse
    • /
    • v.37 no.2
    • /
    • pp.44-52
    • /
    • 1998
  • The purpose of this study is to inquire the people's views on nursing for nurses, correct the image of nurse and take it as basis to be applied on nursing education examining the image of nursing on Television drama playing important role of mass media. 22 nurses of the characters in drama is applied to the analysis object of this study by selecting 6 dramas of Television ones the nurse play on the prime time from June 1 to August 31 in 1997. Contents analysis method was used in Data Analysis, 4 items was used after Coders previously modify and compensate it based on research documents of 1m Milim(1996) 2 Coders made the Coding the article on each person by them seeing the recorded film making the Coding Paper each items is written by the character. The average of reliability degree was 90% which measured the reliability degree by the mathod of Holsti. The statisic method of frequency, percentage was used SPSS Program in data processing The results were as follows. 1. Relative importance of 86.2% nurses in drama was depicted as extra characters 2. The affair attitude of nurses shown on drama was revealed as mechanical(84.7%), passive(45.5%), dependent(54.4%) unkind(68.2%). 3. The activity of nurses was classified with professional! simple affair. The professional affairs such as I.V., Blood Pressure Check, Rounding, Nursing Recording, Patient Education, Assist of Operation, Assistant meal of Patient, etc is mainly depicted and the screen of simple affair such as Receiving telephone, Carrying Tray or Dragging, Stretcher Car, Dressing Car and or Wheel Chair than professional affair. 4. The appearance feature of nurses was shown on thin physique(68.2%), common stature(68.2), dirty costume(45.4%), common appearance(81.9%), unnoble action(63.6%). The image of nurses is illuminated as the exterial scene of technical affair such as assisting the doctors and affair focused on accident and educational activity of nureses or extended role is nor depicted on Television drama. Therefore, the people regard the nurse as sexual object with good appearance than professional worker working professional nursing We want the following, epigraph based on above conclusion. 1. The continuous research is required on the image of nurse shown on various mass media. 2. The later research is required on appliction strategy of mass media for advancing the image of nurse. 3. The research to strengthen the objectivity by comparing analyzed data on drama & analyzing it is required 4. Through the deep study, the standard to show a concrete and professional work of nurses to scenario writers of TV drama is suggested by the association. 5. The monitoring about the mass media must be activated, not by some nurses, on a national scale and much study on the basis of this is needed.

  • PDF

A Study On The Identity Of Yeonsegeuk(Kino-Drama) (연쇄극의 정체성 논의 - 총체예술론적 관점에서 -)

  • Kim, Sunam
    • (The) Research of the performance art and culture
    • /
    • no.25
    • /
    • pp.5-30
    • /
    • 2012
  • I. Identity of Yeonsegeuk as total arts. The purpose of the thesis is to arrange the identy of Yeonsegeuk(Kino-Drama) which is theatre or film. The process of study is tried to discuss on the aethetic of Yeonsegeuk. II. Appearance of Yeonsegeuk and negative disputation of yeonsegeuk The first imported Yeonsegeuk from Japanese in Korea is made by the group of Mizuno Ganggetsu(水野觀月) on Oct. 16. 1915 at Pusan and also to run in Seoul at Hwanggeumgwan. The first of Korean Yeonsegeuk is by Kim, Dosan, a leader of Singeukjwa(theare group) on Oct. 27. 1919 at Danseongsa. Before the liberation of Korea from Japan all made korean Yeonsegeuk are 28 works. III. Dramatic form of Yeonsegeuk I study on the relation between Yeonsegeuik and Sinpageuik(new theatre of modern drama in 1920's). I find that Yeonsegeuik admitted the thechnics of the Sinpageuik and the contents. If We think that the theatre is synthetic art which genealize all arts, we can insist that the Yeonsegeuk is valued the total art as new performance to comply with film art to theatre. Conclusionly Yeonsegeuk is called 'Expanded Theatre' as the new performance which must be dicussed in the view of total art. VI. Discussion on the the aethetic of Yeonsegeuk When we compare the structure of film with the structure of theatre, we can't find a diffrent element between the structure of two art in art semiotic. But we find a fact that film art has special elements in mechanics character which are camera working and motage. These technics influence on the audience's mind. It is different point between Japan and Korean's Kino-drama and Germany's that is to admit the aethetic of total art or not. V. Yeonsegeuk as new performance During Korean modern times Kino-drama was first a kind of total art with stage and screen. But it is regretable that Kino-drama didn't have the background of theory which discourse on the comprehension of total art. As the result Kino-drama bring the confusion of argument that Kino-drama is total art or expanded theatre. This confusion will be disputed on film art as performing arts or future art as expanded film and total art.