• Korean Journal of Computational Design and Engineering
• /
• v.16 no.1
• /
• pp.31-40
• /
• 2011

Product-service system (PSS) is a system of products and service, supporting networks and infrastructure that is designed to be competitive. PSSs satisfy customers' needs more effectively and have a lower environmental impact than traditional business models. Therefore, many companies and governmental institutes are eager to implement the PSSs as a new business model. In this paper, we focus on industrial practices as new business models for the company. PSS, especially, is popular in electronic industry, so one can often observe such examples as iPod, iPhone, e-Book and etc in the field. We first thoroughly investigate the current practices of PSS in Korean electronic industry. The examples are surveyed and projected directions are given. Then, non-electronic PSSs are surveyed. Especially mechanical PSSs are intensively discussed. Based on the survey results, we propose several major development strategies of Sustainable PSS (SPSS). SPSS will bring a competitive edge for company as realization of sustainable development of PSS considering economy, society, and environment.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1064-1072
• /
• 1999

The basic concepts, which are related to the PSS tuning conditions and performance conditions for the safe of determination of PSS gain and compensation of phasor lagging, are thoroughly investigated in this first part. The performance conditions, where the power system has the lowest inherent damping torque and PSS should provide maximum damping torque, are examined by analysing synchronizing torque and damping torque supplied by the voltage control loop at the oscillation frequency. PSS tuning conditions are also investigated by observing the phasor lagging and the gain, resulted from power system-generator-excitation system depending on operating conditions, such as generator active power, reactive power, transmission impedance and AVR gain. The basic concepts developed in this PartImake it possible to lay foundation for the discussion of PSS tuning in Part II.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.255-277
• /
• 2011

Product Service System(PSS), which is an integrated combination of product and service, provides new value to customer and makes companies sustainable as well. The objective of this paper draws Critical Successful Factors(CSF) of PSS through multiple case study. First, we review various concepts and types in PSS and Platform business literature currently available on this topic. Second, after investigating various cases with the characteristics of PSS and platform business, we select four cases of 'iPod of Apple', 'Kindle of Amazon', 'Zune of Microsoft', and 'e-book reader of Sony'. Then, the four cases are categorized as successful and failed cases according to criteria of case selection and PSS classification. We consider two methodologies for the case selection, i.e., 'Strategies for the Selection of Samples and Cases' proposed by Bent(2006) and the seven case selection procedures proposed by Jason and John(2008). For case selection, 'Stratified sample and Paradigmatic cases' is adopted as one of several options for sampling. Then, we use the seven case selection procedures such as 'typical', 'diverse', 'extreme', 'deviant', 'influential', 'most-similar', and 'mostdifferent' and among them only three procedures of 'diverse', 'most?similar', and 'most-different' are applied for the case selection. For PSS classification, the eight PSS types, suggested by Tukker(2004), of 'product related', 'advice and consulancy', 'product lease', 'product renting/sharing', 'product pooling', 'activity management', 'pay per service unit', 'functional result' are utilized. We categorize the four selected cases as a product oriented group because the cases not only sell a product, but also offer service needed during the use phase of the product. Then, we analyze the four cases by using cross-case pattern that Eisenhardt(1991) suggested. Eisenhardt(1991) argued that three processes are required for avoiding reaching premature or even false conclusion. The fist step includes selecting categories of dimensions and finding within-group similarities coupled with intergroup difference. In the second process, pairs of cases are selected and listed. The second step forces researchers to find the subtle similarities and differences between cases. The third process is to divide the data by data source. The result of cross-case pattern indicates that the similarities of iPod and Kindle as successful cases are convenient user interface, successful plarform strategy, and rich contents. The differences between the successful cases are that, wheares iPod has been recognized as the culture code, Kindle has implemented a low price as its main strategy. Meanwhile, the similarities of Zune and PRS series as failed cases are lack of sufficient applications and contents. The differences between the failed cases are that, wheares Zune adopted an undifferentiated strategy, PRS series conducted high-price strategy. From the analysis of the cases, we generate three hypotheses. The first hypothesis assumes that a successful PSS system requires convenient user interface. The second hypothesis assumes that a successful PSS system requires a reciprocal(win/win) business model. The third hypothesis assumes that a successful PSS system requires sufficient quantities of applications and contents. To verify the hypotheses, we uses the cross-matching (or pattern matching) methodology. The methodology matches three key words (user interface, reciprocal business model, contents) of the hypotheses to the previous papers related to PSS, digital contents, and Information System (IS). Finally, this paper suggests the three implications from analyzed results. A successful PSS system needs to provide differentiated value for customers such as convenient user interface, e.g., the simple design of iTunes (iPod) and the provision of connection to Kindle Store without any charge. A successful PSS system also requires a mutually benefitable business model as Apple and Amazon implement a policy that provides a reasonable proft sharing for third party. A successful PSS system requires sufficient quantities of applications and contents.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.95-98
• /
• 1996

Response speed of generator/control system kas increased with the aid of the development of power electronics. Even though it is desirable to enhance response speed for the control system(AVR/Gov) of generator itself, in case a certain generator/control system with high response excitation system is connected with bulk power system, terminal voltage and active power of some generators can oscillate with adjoining generators or near area when even a little of disturbance take place. PSS(Power System Stabilizer) is used to damp rotor swing by adding the supplementary signal in phase with speed. As the stable AVR response is very important before PSS is installed, modeling and analysis of generator/control system was performed. Next we have analysed PSS response of Hanlim's gas turbine by transmission line open/close test.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.13-14
• /
• 2008

This paper describes the optimal PSS parameter design for the PSS of EX2000 excitation system. The suggested tuning technique uses the model-based PSS tuning method which have three steps: generation system modeling, determination of PSS parameters, and on-site test. Using this method, the PSS parameters of EX2000 system in Dangjin T/P #4 was designed and verified by linear analysis program, PSS/E, and EMTDC/PSCAD.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.23-27
• /
• 2015

In this paper, eco-friendly paper strain gauge was fabricated in the way of printing strain gauge on paper substrate, using PEDOT:PSS ink and inkjet printer technology. As a p-type conductive high polymer, PEDOT:PSS is known to be piezoresistive effect. I formed a strain gauge by connecting in parallel 5 lines of $60{\mu}m$ width printed with PEDOT:PSS. To minimize surrounding influence such as temperature, I formed wheat-stone bridge by combining 4 strain gauges (quarter-bridge strain gauge) which were made up of PEDOT:PSS 5 lines and measured. In quarter-bridge strain gauge, only two strain gauges, facing each other, arranged in strain and horizontal direction were deformed while the other two strain gauge of vertical direction were not. Therefore, quarter-bridge strain gauge showed the output of half bridge. The fabricated quarter-bridge strain gauge had output sensitivity of $105.6{\mu}V/V{\cdot}mm$ and its output linearity was relatively good.

• Journal of agricultural medicine and community health
• /
• v.25 no.2
• /
• pp.265-273
• /
• 2000

Benign prostatic hyperplasia (BPH) is a highly prevalent, age-related disorder in men which place a considerable burden on health care resources worldwide. While BPH and hypertension are apparently diverse disease processes, they have some features in common(e.g. underlying etiology of the sympathetic nervous system). The purpose of this study is to estimate the prevalence of lower urinary tract symptoms using I-PSS(international prostate symptom score) and to investigate the association of hypertension with I-PSS. This study was carried out to 390 men(40~86 year old) at 3 Myun in Chungju City from July to August, 1997. Subjects answered on questionnaire for I-PSS and were checked age, education, marital status, annual income, blood pressure. The mean age of subjects was 59.8 year old. The mean of I-PSS were increased by age decades(40~49, 50~59, 60~69, 70~86) and it's scores were 4.4, 7.0, 8.2, 12.3 respectively. Strong correlations were observed between the I-PSS and the QUL(quality of life)(P=0.0001). I-PSS(mean-value) were 7.85 in hypertensive group and 8.39 in normotensive group but there was no statistically significance between the two groups(P>0.05). The proportion of mean scoring greater than 8 was 42.5%. There have been reports of association between lower urinary tract symptoms and hypertension, but there was no consistent suggestion that such an association could be casual. The need for high-quality epidemiological information and consequent increased prospects for prevention is obvious.

• Korean Journal of Animal Reproduction
• /
• v.27 no.2
• /
• pp.97-102
• /
• 2003

This study was carried out to find out PSS(Porcine Stress Syndrome) with the PSE(Pale, Soft, Exudative) in different piglets. These experiments were accomplished with the aid of PCR-RFLP(Polymerase Chain Reaction-Restriction Fragment Length Polymorphism). The samples were collected and examined from umbilical cord blood of piglets of Yorkshire, Landrace and Crossbred. And then, the PCR products were digested by restriction enzyme, Hha I. The results obtained were as follows; The PCR products of the blood genomic DNA of ryanodine receptor gene were length of 1 .8kb in umbilical cord blood. Normal type(NN), heterozygous type(Nn) and recessively homozygous type(nn, PSS) as a result of digestion of restriction enzyme, Hha 1, were 90.0%, 10.0% and 0.0% in Yorkshire piglets, 76.2%, 19.0% and 4.8% in Landrace, 69.1%, 23.8% and 7.1% in crossbred, respectively. As already showing the above results, the blood from piglets umbilical cord can be availably used for the determination of genotypes of PSS because of easiness of blood collection without stress in live piglets.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.146-146
• /
• 2015

We report the enhanced performance of poly(N-vinylcarbozole) (PVK)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based quantum-dot light-emitting diodes by inserting the polyaniline:poly (p-styrenesulfonic acid) (PANI:PSS) interlayer. The QD-LED with PANI:PSS interlayer exhibited a higher luminance and luminous current efficiency than that without PANI:PSS. Ultraviolet photoelectron spectroscopy results exhibited different electronic energy alignments of QD-LEDs with/without the PANI:PSS interlayer. By inserting the PANI:PSS interlayer, the hole-injection barrier at the QD layer/PVK interface was reduced from 1.45 to 1.23 eV via the energy level down-shift of the PVK layer. The reduced barrier height alleviated the interface carrier charging responsible for the deterioration of the current and luminance efficiency. This suggests that the insertion of PANI:PSS interlayer in QD-LEDs contributed to (i) increase the p-type conductivity and (ii) reduce the hole barrier height of QDs/PVK, which are critical factors leading to improve the efficiency of QD-LEDs.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.240-242
• /
• 2005

전력계통안정화장치(PSS)는 전력안정화를 위하여 발전기의 여자기에 보조신호를 주입하여 전력계통의 진동문제를 해결할 수 있는 장치이다. 본 논문은 기존의 비실시간 툴 (PSS/E, EMTDC/PCAD.,)을 사용한 경우와 달리 실시간 시뮬레이션 툴을 사용하여 전력계통안정화장치(Power System Stabilizer : PSS)의 영향 및 효과를 검토하였다. 이에 사용된 실시간 툴은 RTDS의 PC 버전인 RSCAD를 이용하여 분석하였다. 모의에 사용된 선로는 3상 3회선 송전선로이며 무한모선에 연결하였다. 사고는 3회선 중의 1회선 중앙에 3상 지락 상정사고를 발생시켜 선로 차단 및 재투입을 고려하여 실시하였다. 본 연구에서 RSCAD에 대한 기존의 전통적인 형태인 IEEE의 PSS1A type과 보다 정교한 이중구조를 가진 PSS2A type을 사용하여 검토하였다. IEEE의 PSS1A type은 각속도 ${\omega}$를 측정하여 사용하고 PSS2A type은 각속도 ${\omega}$와 유효전력 P를 측정하여 사용할 수 있는 형태이다. 그리고 실시간 시뮬레이션 결과는 각속도 ${\omega}$와 유효전력 P를 측정하여 PSS의 입력에 주입하고 이에 대한 효과를 비교하였다.