• 호남수학학술지
• /
• 제33권2호
• /
• pp.153-161
• /
• 2011

Greg([Greg]) considered that $$N_k= \sum\limits_{i=1}^k(-1)^{i+1}P_{i,k}(p)N_1^i$$ where the $P_{i,k}$'s were polynomials with positive integer coefficients. In this paper, we will give the equations for $\sum\limits{P_{i,k}$ modulo 3. Using this, if we send a information for elliptic curve to sender, we can make a new checksum method for Manchester coding in IEEE 802.3 or IEEE 802.4.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.217-222
• /
• 2001

For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

• 멤브레인
• /
• 제8권3호
• /
• pp.157-169
• /
• 1998

폴리이미드(6FDA-p-TeMPD) 비대칭막을 습식 상분리법으로 제조하는데 있어서 그 구조에 미치는 용매 (DMAc, NMP, 1,4-dioxane)와 비용매($H_2O$, Methanol, n-hexane)의 영향을 고찰하였다. 고분자/용매/비용매 분리 속도를 예측함으로써 생성된 비대칭막의 구조를 해석하였다. 용해도 곡선이 용매-고분자 축에 가깝고, 응결값이 작으며, 광투과도가 즉시 감소하고, 용해도 계수차가 $\Delta \delta_{S-NS} > \Delta \delta_{P-NS} > \Delta \delta_{P-S}$ 순이면 생성막은 고분자 결절의 불연속 결집속에 finger-like pore가 형성되었다. 용해도 곡선이 용매-고분자 축에서 멀고, 응결값이 크며, 상분리 시간이 길고, 용해도 계수차 $\Delta \delta_{i-j}$ 가 $\Delta \delta_{P-NS} >(\Delta \delta_{S-NS} < > \Delta \delta_{P-S})$ 일때, 생성되는 막은 미소 고분자 결절구가 치밀하게 응집된 표피가 있으며, 고분자 연속상 스폰지층에 macropore가 발달되었다. 용해도 곡선이 용매-고분자 축으로부터 멀리 떨어지고, 응결값이 대단히 크며, 상분리 시간이 길고, 용해도 계수차 $\Delta \delta_{i-j}$가 $\Delta \delta_{S-NS} > (\Delta \delta_{P-NS}$\lessgtr$)\Delta \delta_{P-S}$인 경우는 고분자 미소 결절의 두터운 응집층과 다음에 성근 결절응집층이 나타났다.

• 생명과학회지
• /
• 제15권6호
• /
• pp.935-940
• /
• 2005

Coumarine이 부착된 인산결합 단백질 (PBP-MDCC)의 형광변화가 뉴클레오사이드 삼인산 가수분해과정에서 배출된 무기 인산의 양을 측정하기 위해 관찰되었다. PBP-MDCC 정제후, 형광 방출 스펙트럼은 형광세기가 PBP-MDCC의 몰비을로 약 $70\%$까지 직선형태로 증가하는 것을 보였다. 형광 신호와 인산 기준물질과의 상호관계 측정이 인산 농도-형광세기 표준곡선을 구하기 위하여 stopped-flow 기구에서 행하여졌다. dTTP 가수분해로 부터 나오는 에너지를 이용하여 이중나선 DNA를 풀어주는 단백질인 T7박테리오파지 나선효소를 dPTT라 반응 시켰을 때, 형광변화를 배출된 인산의 양으로 전환할 수 있었다. 인산 배출 결과는 단일가닥 Ml3 DNA가 T7나선 효소에 의한 dTTP가수분해반응을 여러배 증가시키는 것을 보인다. 뉴클레오타이드 삼인산 가수분해 반응에 있어서 종말점 분석 대신에, PBP-MDCC에 의한 연속적인 인산 배출 분석이 배출된 인산을 측정하는데 있어서 쉽고 편리한 방법임을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.476-484
• /
• 2002

The aim of this study is to investigate the ductile fracture behavior under mixed mode (I/II) loading using SA533B pressure vessel steel. Anti-symmetric 4-point (AS4P) bending tests were performed to obtain the J-R curves under two different mixed mode (I/II) loadings. In addition, finite element analysis using Rousselier Ductile Damage Theory was carried out to predict the J-R curves under mixed mode (I/II) loadings. In conclusions, the J-R curves under. Mixed Mode (I/II) loading were located between those of Mode I and Mode II loading. When the mixity of mixed mode (I/II) loading was high, the J-R curve of mixed mode (I/II) loading approached that of pure mode I loading after some amount of crack propagation. In contrast with the above fact, if the mixity was low, the J-R curve took after that of pure mode II loading. Finally, it was found that the predicted J-R curves made a good agreement with the test data through the tuning procedures of $\beta$ values at the different mixed mode (I/II) loading.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.410-411
• /
• 2007

To investigate the ZnO LED which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF magnetron sputtering system. The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Analysis of ZnO LED V-I curve will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.68-74
• /
• 2017

To predict the damage of Reinforced Concrete (RC) structures from mass explosion, Pressure-Impulse (P-I) curves representing the relationship between peak pressure and impulse based on damage criteria are essential. There are P-I curves developed by the U.S. DoD without detailed explanation regarding validation. In this study, full scale explosion tests were conducted measuring response of RC slab to modify and validate pre-existing P-I curves. Four same RC slabs were prepared, and placed at different distances, which are fixed to steel frame with concrete base. Scaled distances were selected to show different failure types using P-I curve based on Single Degree Of Freedom (SDOF) model. It was found that SDOF model can be used to evaluate and identify one-way RC slab damage with difference damage criteria.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.7-11
• /
• 2010

Various transmission technologies have been developed to satisfy environmental issues recently. Especially, the technology of the proportional control solenoid valve (PCSV) to ensure high level performance by electronic control has been studied. This study builds an analysis process for designing of the PCSV and characteristic predictions.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.537-544
• /
• 2017

The strength and deformational capacity of slender reinforced concrete (RC) columns greatly rely on their slenderness ratios, while an additional secondary moment (i.e., the $P-{\delta}$ effect) can be induced especially when the RC column members are exposed to fire. To evaluate the fire-resisting performances of RC columns, this study proposed an axial force-flexural moment (i.e., P-M) interaction curve model, which can reflect the fire-induced slenderness effects and the nonlinearity of building materials considering the level of stress and the magnitude of temperature. The P-M interaction model proposed in this study was verified in detail by comparing with the fire test results of RC column specimens reported in literature. The verification results showed that the proposed model can properly evaluate the fire-resisting performances of RC column members.

• 한국안광학회지
• /
• 제19권4호
• /
• pp.539-550
• /
• 2014

목적: 본 연구에서는 강제vergence 주시시차곡선에서 기울기가 가파르고 증상이 있는 사람들을 대상으로 광학적 교정과 시기능훈련이 곡선 type별로 변화가 있는지를 알아보고자 하였다. 방법: 91명의 대상자에 대해 wesson fixation disparity card로 강제vergence 주시시차곡선을 그려 그 중 유형별로 기울기가 가파르고 증상이 있는 대상자 30명을 선택하여 그에 맞는 프로그램에 따라 5주 동안 시기능훈련을 실시하였다. 결과: type I, II, III, IV 중 증상을 호소하는 30명에 대해 5주 동안 실시한 시기능훈련 전과 후에 대한 기울기의 변화에는 유의한 변화(p=0.013)가 있었으며, 양안시검사값 및 자각적인 증상 또한 현저히 호전되었다. 결론: 시기능훈련은 주시시차곡선의 변화에 영향을 주며 증상 또한 완화하는데 효과가 있었다. 주시시차 곡선은 대상자에 대한 많은 정보를 담고 있으며, 또한 처방의 가이드라인으로 제시될 수 있다.