• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3047-3062
• /
• 1998

This paper deseribes the desihn and the implementation of the Realtime Transport Protocol(RTP)/ Rdaltime Control Protocol(RTCP) (RFC 1889,1890) that is used to transmit the audio/video data to any destination and to feedback the Quality of Service (QoS) information of the received media data to the sender, in the teleconferencing systems proposed by ITU-T. These protocols are implemented with multi thead technique and run on top of UDP/IP-Multicast through the socket interface as the underlying protocol. The upper layer is impelmented such that in can be accessed by the H245 comference control protocol. The RTP packetizes the digitized audio/video data from the encoder info a fixed format, and multieast to the participants. The RTCP monitors RTP packets and extracts the QoS values from it such as round-trip delay, jiter and packet loss to form RTCP packets and non periokically sends them to the sender site. In this Paper, we also descritx the study of measurement and analysis for QoS factors that observed on performing teleconferencing system over Internet. The results from this experiment is indicate that RTT and Jitter value are acceptable even entwork load is high. However, it appears that packet loss rate is high in daytime and most losses periods have length one or two.

• KSBB Journal
• /
• v.22 no.2
• /
• pp.91-96
• /
• 2007

The saccharogenic liquid (SFW) obtained by the enzymatic saccharification of food wastes was used as a medium for production of bacterial cellulose (BC). The enzymatic saccharification of food wastes was carried out by the cultivation supernatant of Tricoderma inhamatum KSJ1 culture. Acetobacter xylinum KJ1 was employed for the BC production culture. Under the scaled-up aeration condition of 1.0 vvm, 5.64 g/L of BC was produced in 3 days cultivation in 50 L air circulation bioreactor using SFW medium with addition of 0.4% agar. The productivity was similar to that of 10 L air circulation bioreactor (5.84 g/L). This cultivation method with 50 L air circulation bioreactor decreasing shear stress and increasing oxygen transfer coefficient ($k_La$) was very useful in BC mass production. The physical properties, such as morphology, molecular weight, crystallinity, and tensile strength of BC produced by the static culture (A), the air circulation culture using 10 L bioreactor (B) and 50 L bioreactor (C) were investigated. The number average molecular weight of BCs produced under the different culture conditions (A-C) showed 2,578,000, 1,975,000, and 1,809,000, respectively. Tensile strength was 1.72 $kg/mm^2$, 1.19 $kg/mm^2$, and 1.18 $kg/mm^2$, respectively. All of the BCs had a form of cellulose I representing pure cellulose. The relative degree of crystallinity showed the range of 86.2$\sim$87.8%. BC production by the air circulation culture mode brought more favorable results in terms of the physical properties and its ease of scale-up. Therefore, it is expected that the new BC production method, the air circulation culture using SFW, would contribute greatly to BC-related manufacturing.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.208-217
• /
• 2011

The effects of pH and temperature on the removal of two dyes (neutral red; NR and malachite green oxalates; MG) from aqueous effluents using Maghnia montmorillonite clay in a batch adsorption process were investigated. The results showed the stability of the optical properties of MG in aqueous solution and adsorbed onto clay under wide range of pH 3-9. However, the interaction of NR dye with clay is accompanied by a red shift of the main absorption bands of monomer cations under pH range of 3-5, whereas, those of neutral form remains nearly constant over the pH range of 8-12. The optimal pH for favorable adsorption of the dyes, i.e. ${\geq}$90% has been achieved in aqueous solutions at 6 and 7 for NR and VM respectively. The most suitable adsorption temperatures were 298 and 318 K with maximum adsorption capacities of 465.13mg/g for NR and 459.89 mg/g for MG. The adsorption equilibrium results for both dyes follow Langmuir, Freundlich isotherms. The numerical values of the mean free energy $E_a$ of 4.472-5.559 kj/mol and 2.000-2.886 kj/mol for NR and MG respectively indicated physical adsorption. Various thermodynamic parameters, such as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$, ${\Delta}G^{\circ}$ and Ea have been calculated. The data showed that the adsorption process is spontaneous and endothermic. The sticking probability model was further used to assess the potential feasibility of the clay mineral as an alternative adsorbent for organic ion pollutants in aqueous solution.

• Composites Research
• /
• v.33 no.2
• /
• pp.68-75
• /
• 2020

Recently, the use of TiO₂ as a phtocatalyst has been diversely investigated due to its excellent durability performance and high photocatalytic reaction efficiency. Active researches have particularly focused on the development of TiO₂-incorporated cementitious composites in order to remove the atmospheric pollutants. Furthermore, the potential utilization of TiO₂-incorporated cementitious composites as road accessories such as tunnels, road median separators and soundproof walls in the form of tiles, blocks and structural components has been widely examined. In this regard, a thorough understanding on the material characteristics of TiO₂-incorporated cementitious composites should be preceded. The present overview article, therefore, revisits previous studies of TiO₂-incorporated cementitious composites and summarizes their various physicochemical properties and atmospheric pollutants removal performance.

• Steel and Composite Structures
• /
• v.1 no.4
• /
• pp.459-480
• /
• 2001

The damage suffered by steel structures during the Northridge (1994) and Kobe (1995) earthquakes indicates that the fully restrained (FR) connections in steel frames did not behave as expected. Consequently, researchers began studying other possibilities, including making the connections more flexible, to reduce the risk of damage from seismic loading. Recent experimental and analytical investigations pointed out that the seismic response of steel frames with partially restrained (PR) connections might be superior to that of similar frames with FR connections since the energy dissipation at PR connections could be significant. This beneficial effect has not yet been fully quantified analytically. Thus, the dissipation of energy at PR connections needs to be considered in analytical evaluations, in addition to the dissipation of energy due to viscous damping and at plastic hinges (if they form). An algorithm is developed and verified by the authors to estimate the nonlinear time-domain dynamic response of steel frames with PR connections. The verified algorithm is then used to quantify the major sources of energy dissipation and their effect on the overall structural response in terms of the maximum base shear and the maximum top displacement. The results indicate that the dissipation of energy at PR connections is comparable to that dissipated by viscous damping and at plastic hinges. In general, the maximum total base shear significantly increases with an increase in the connection stiffness. On the other hand, the maximum top lateral displacement $U_{max}$ does not always increase as the connection stiffness decreases. Energy dissipation is considerably influenced by the stiffness of a connection, defined in terms of the T ratio, i.e., the ratio of the moment the connection would have to carry according to beam line theory (Disque 1964) and the fixed end moment of the girder. A connection with a T ratio of at least 0.9 is considered to be fully restrained. The energy dissipation behavior may be quite different for a frame with FR connections with a T ratio of 1.0 compared to when the T ratio is 0.9. Thus, for nonlinear seismic analysis, a T ratio of at least 0.9 should not be considered to be an FR connection. The study quantitatively confirms the general observations made in experimental results for frames with PR connections. Proper consideration of the PR connection stiffness and other dynamic properties are essential to predict dynamic behavior, no matter how difficult the analysis procedure becomes. Any simplified approach may need to be calibrated using this type of detailed analytical study.

• 모자간호학회지
• /
• v.4 no.1
• /
• pp.3-11
• /
• 1994

Presently there is an increasing demand for home health care services due to changes in the demographic structure as a result of an increasing elderly population, socio-economic improvements, and changes in the family structure, as well as the growing number of people with degenerative diseases. In addition to these reasons, rising medical costs and there a shortage of patient beds space in the hospital, particularly since introduction of national medical insurance. There has been an increasing demand for health care health care services. This study was done to identify the basic data for home health care management. It focused on developing client selection criteria, assessment tools, and recording methods. This was accomplished by the researchers visiting the patients in their homes. The research process included preparation investigation, tool development, training of the project researcher, and visiting the clients in their homes. The research tools are as follows : 1. Record development : a) The selection criteria tool for home health care of postpartum women was a structured tool and consisted of four parts. b) The structured assessment tool consisted of a general items, obstetric history, past medical history, methods of feeding, medications taken before admission, laboratory test results, discharge instructions, discharge medications, family tree, economic status, environmental status, a map, health assessment of postpartum women and their newborns. c) The visit note I consisted of the frequency of visits. Visit note II consisted of the date ; nursing problems ; nursing process including the initial assessment ; nursing goal ; visit plan ; postpartum women and their neonate health status, diagnosis, goal, implementation, evaluation, summary, next plan, for visit revision. d) Problem note consisted of the date, problem numbers, nursing diagnosis, problem appearance date problem resolution date. The research results are as follows : 1. Nursing problems : The nursing problems of the postpartum women and their neonates were evaluated by the number of nursing diagnoses and the change in the pattern of nursing diagnosis related to the number of visits. a) Nursing diagnosis The nursing diagnosis was classified according to physical function, psychosocial function, family system maintained function. b) The changes of nursing diagnosis related to the number of visits. As the type of nursing diagnosis changed related to the number of visits the number of nursing diagnoses decreased. 2. Contents of home health care : The content was categorized according to assessment, direct care, counseling, education, family care, reporting to with the attending doctor. The recommendations based on the research results are as follows : 1. Tool development Replication of this study is needed to test the validity of the assessment tools used. 2. Home visit a) Home health care nurses should be licensed and qualified. A referral form from the attending doctor is needed for legal protection of nurses. b) The first home visit need to be within 24 hours of discharge from the hospital to decrease the anxiety of frightened postpartum women. c) When the changes occur in the newborn's status, home health care nurses should consult a pediatrician. Communication within the home healthcare team is essential and needs to consistent and done smoothly. 3. Home health care A Study is required to develop protocols for education of staff and for operation of all aspects of this program.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.165-175
• /
• 1985

The natural forest vegetation of the Piagol, Mt. Chiri, was classified into five major communities, i.e. Quercus mongolica, Carpinus laxiflora, C. tschonoskii, Q. serrata and Fraxinus mandshurica community. C. tschonoskii, C. laxiflora and Q. mongolica characteristically were dominated in the range of 500∼700 m, 700∼900 m and 900∼1,400 m in altitude, respectively. Abies nephrolepis and Rhododendron schlippenbachii in the ridge of Nogodan-Nalnaribong, and F. mandshurica and Q. serrata in the Yongsuam ravine were found as the dominant species. The transition between C. tschonoskii and C. laxiflora communities was relatively wide. The boundary between F. mandshurica, in the conglomerated zone, and the other communities surrounding its community was fairly abrupt. In Q. mongolica community, the canopy was relatively opened and the oak young tree of undergrowth was fairly dense. In the community of C. laxiflora and C. tschonoskii, the species composed of their understory was rich while their coverage was lower than that of Q. mongolica community. Shannon's diversity index was decreased in order of C. tschonoskii, C. laxiflora and Q. mongolica community, while their Simpson's dominance index increased conversely. Judging by the DBH-class distribution showing the negative exponential curve, these communities were considered as the climax forest. In Polar Ordination used samples (quadrats), the vegetation of the Piagol was divided into five groups, which was coincided with five communities classified by Braun-Blanquet system. In the ordination, the first axis and the second axis may be considered soil conditions and thermal conditions, respectively. It seems that two different methods, phytosociological method in macro level and ordination techniques in micro level, are useful for the vegetation classification.

• YAKHAK HOEJI
• /
• v.42 no.4
• /
• pp.437-446
• /
• 1998

The distribution, metabolism and excretion of CKD-602{20(S)-7-[2-(N-Isopropylamino)ethyl]camptothecin HCI), a new camptothecin derivative, were investigated in rats after a sing le administration of CKD-602. 1. The tissue levels of CKD-602 given to mice by the intravenous route at a dose of 20mg/kg were the highest in intestine, followed in descending order by kidney, liver, stomach,lung, heart, spleen and plasma. The concentrations of CKD-602 after 24hrs decreased to less than 2% of the peak level in most tissues except the skin. The urinary and fecal excretion of CKD-602 were 47.6% and 44.4% of the administered dose, respectively, with 0.7% remaining in the rinse. 2. After administration of CKD-602 at 10mg/kg in rats, metabolism of this compound was examined in plasma, urine, and feces. The plasma samples were collected for 24hr, urinary and fecal samples for 72hr. While any peak of CKD-602 in HPLC chromatograms was not detected from plasma and urine it was detected in feces (peaks, 9.8 min). However, additional peak area was about 0.5% of the peak area of parent CKD-602. Therefore, CKD-602 may be eliminated with the parent form and rarely metabolized in the body. 4. After I.v. administration of CKD-602 at 10mg/kg in rats, urinary and fecal excretions were examined for 72hrs post dose period. 87% of total urinary excretion of CKD-602 was excreted within 8hr after administration, 53%, and 32% of total fecal excreted amounts were determined in 0-24 hr and 24-48hr periods, respectively. The total excretion amounts of CKD-602 into urine and feces were 94% of the administered dose.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.39-59
• /
• 2010

Seokgatap and Dabotap are representing the tower patterns in "Gyeonbotappum" of the Lotus Sutra. It is very peculiar, for the description on "Gyeonbotappum" is usually made in terms of 'the two Buddhas sitting side by side'. If 'the two Buddhas sitting side by side' is describing the situation in Dabotap, the double structure of Seokgatap and Dabotap can be said to symbolize the scriptural description in a different viewpoint. Its correct comprehension is pretty important in understanding Bulguksa. For this, this paper first arranged the critical minds and flows about the faith objects in Indian Buddhism. And, it was considered how these aspects were accumulated through Saddharma-pundarika sutra. Secondly, it was considered why "Gyeonbotappum" took the typical symbolism in Saddharma-pundarika sutra(Lotus Sutra). These parts should be necessarily considered in advance in that Seokgatap and Dabotap were derived from the form of "Gyeonbotappum". Based on this approach, the author checked the actual aspects of Seokgatap that the tower was built on a natural rock ground and the stones surrounding the tower are constituting the 8-directional Lotus site. With these two aspects, we could get the clue on the foundation time of Bulguksa that its founder had intended. In that Dabotap was formed on the basis of "Gyeonbotappum", the features of Dabotap is very important in comprehending its foundation viewpoint. As a result, the viewpoint of double towers in Bulguksa can be said to be the one that the world of suffering was to change to the Pure Land after Sakyamuni preached the Lotus Sutra on the top of Mt. Grdhrakuta and Prabhutaratna-tathagata proved it. This foundation viewpoint shows us clearly that 'the Lotus Buddhist Country' existed in parallel to the Avatamska Buddhist Country. It secures an appropriate meaning in that it can complement or adjust our understanding on the 'Buddhist country (Bulguk)' of Bulguksa where the Avatamska Idea is emphasized relatively highly as shown in the whole title of Bulguksa as 'Avatamska Bulguksa.'

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.59-70
• /
• 2020

We discuss a modified numerical model based on the Monte Carlo radiative transfer (MCRT) method, i.e., the MCRT matrix method, for the analysis of atmospheric scattering effects in three-dimensional flash LIDAR systems. Based on the MCRT method, the radiative transfer function for a LIDAR signal is constructed in a form of a matrix, which corresponds to the characteristic response. Exploiting the superposition and convolution of the characteristic response matrices under the paraxial approximation, an extended computer simulation model of an overall flash LIDAR system is developed. The MCRT matrix method substantially reduces the number of tracking signals, which may grow excessively in the case of conventional Monte Carlo methods. Consequently, it can readily yield fast acquisition of the signal response under various scattering conditions and LIDAR-system configurations. Using the computational model based on the MCRT matrix method, we carry out numerical simulations of a three-dimensional flash LIDAR system operating under different atmospheric conditions, varying the scattering coefficient in terms of visible distance. We numerically analyze various phenomena caused by scattering effects in this system, such as degradation of the signal-to-noise ratio, glitches, and spatiotemporal spread and time delay of the LIDAR signals. The MCRT matrix method is expected to be very effective in analyzing a variety of LIDAR systems, including flash LIDAR systems for autonomous driving.